Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 46

Thread: Ud3r blue screen memory management




  1. #21
    Join Date
    Apr 2011
    Location
    wisconsin
    Posts
    17

    Default Re: Ud3r blue screen memory management

    ok got Bios to Fg1

    loaded the settings you recommended, something didnt work tho, bsod twice, 0124
    i loaded fail safe defaults on the mem voltage section and now its stable, but i have no idea how to set the timings correctly other than guessing, cpuz shows

    RAM Speed : 800 MHz (2:8) @ 10-11-11-29, not what i want right?

    and also somehow after bios update, pc doesnt know what drive my win7 is on anymore i have to tell it to go to the correct hdd, otherwise tells me to insert repair disc, i think i can figure that one out tho

    also to note there are some pretty blue lights now shinning near the memory sticks that i have never seen lit up before

  2. #22
    Join Date
    Feb 2011
    Location
    south africa
    Posts
    55

    Default Re: Ud3r blue screen memory management

    Ok - now manually set DRam timings to 9-9-9-24 ( Enhanced Performance set to " Standard " ) and up the QPI voltage ( to 1.42v or 1.46v ) . I assume you're using the setting in the template I gave you ?

    BSOD 0124 relates to QPI voltage being too high or too low , I reckon it must be too low .

    When you updated the bios it loads bios defaults if the block in @Bios is marked " Load defaults " thus the need to reset all bios settings .
    Xeon E5620 @ 225x18 1.325v | Corsair XMS3 1800 8-8-8-248 @ 1.66v / QPI 1.52v | Gigabyte X58A-UD3R ver 2.0 | GTX295

  3. #23
    Join Date
    Feb 2011
    Location
    south africa
    Posts
    55

    Default Re: Ud3r blue screen memory management

    Here is updated template then : try manually setting all of these in bios

    CPU Clock Ratio ................................ [16x]
    Intel(R) Turbo Boost Tech .................. [Disabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Disabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Disabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. [36x]
    Uncore Frequency .......................... [17x]
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... [200]
    PCI Express Frequency (MHz) ........... [102]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [8]
    DRAM Timing Selectable (SPD) .......... [Quick] this means you must set SPD in channel A , other channels will follow these

    Channel A

    ##Channel A Standard Timing Control##
    CAS Latency Time ......................9
    tRCD .......................................9
    tRP .........................................9
    tRAS .......................................24

    Other SPD settings to [Auto]


    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Level2]
    CPU Vcore ............................... [1.35v]
    QPI/VTT Voltage 1.150v ............ [1.42v or 1.46v] try lower one first
    CPU PLL 1.800v ........................ [Auto]

    MCH/ICH
    PCIE 1.500v ...........................[1.54v]
    QPI PLL 1.100v .......................[1.26]
    IOH Core 1.100v .....................[1.24]
    ICH I/O 1.500v .......................[1.58]
    ICH Core 1.1v .........................[1.14]

    DRAM
    DRAM Voltage ...................1.64v
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    Last edited by fredeb; 04-20-2011 at 06:48 PM.
    Xeon E5620 @ 225x18 1.325v | Corsair XMS3 1800 8-8-8-248 @ 1.66v / QPI 1.52v | Gigabyte X58A-UD3R ver 2.0 | GTX295

  4. #24
    Join Date
    Feb 2011
    Location
    south africa
    Posts
    55

    Default Re: Ud3r blue screen memory management

    Pretty blue LED's indicate that CPU is being overclocked , which is exactly what's happening . DRAM frequency in CPUZ indicating 800mhz equals 1600mhz DDR , so that is the frequency you want . The memory controller on your cpu only supports DDR1066 officially , thus the need to overclock . Anyway - test with above settings and let us know if it works .
    Xeon E5620 @ 225x18 1.325v | Corsair XMS3 1800 8-8-8-248 @ 1.66v / QPI 1.52v | Gigabyte X58A-UD3R ver 2.0 | GTX295

  5. #25
    Join Date
    Apr 2011
    Location
    wisconsin
    Posts
    17

    Default Re: Ud3r blue screen memory management

    Using the settings you last posted everything is stable, by the time i saved the bios and got to windows perhaps the system was warm enough as i havent had a bsod so far, i'll see what happens on the next cold boot, setting the timing shows correct 9-9-9-24 However my Cpu is now overclocked to 3.2ghz thats what is shows in windows and i am just using the stock fan so i am sitting at 45-45C at idle, not really what i would like it to be. I'd prefer it to be at normal 2.8ghz although i should probably get a better cooler. Thanks for the help so far, I'll update you again when i cold boot next.

  6. #26
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ud3r blue screen memory management

    If you want stock CPU freq make the following changes

    Code:
    CPU Clock Ratio ................................ [16x]  << Set auto or 22
    Intel(R) Turbo Boost Tech .................. [Disabled]  << Enabled
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]  << Enable if you want CPU speed and voltages to go down at idle (Stock)
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Disabled]
    CPU EIST Function ............................ [Disabled]  << Enable if you want CPU speed and voltages to go down at idle (Stock)
    Virtualization Technology ................... [Disabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. [36x] or x44 (at 133 Bclk)
    Uncore Frequency .......................... [17x]  << Set x24-26
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... [200]  << Set 133 or disable above
    PCI Express Frequency (MHz) ........... [102]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [8]  << Set x12 for 1600Mhz at 133 Bclk
    DRAM Timing Selectable (SPD) .......... [Quick] this means you must set SPD in channel A , other channels will follow these
    
    Channel A
    
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................9
    tRCD .......................................9
    tRP .........................................9
    tRAS .......................................24
    
    Other SPD settings to [Auto]
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Level2]  << Level one will be best for your CPU, plus you want stock CPU anyway, so you can use auto if you like or disabled
    CPU Vcore ............................... [1.35v]
    QPI/VTT Voltage 1.150v ............ [1.42v or 1.46v] try lower one first  << Not sure why you were suggested such a high value?   For 6GB at 1600Mhz with 999 timings, you should be fine with 1.2-1.35 at least
    CPU PLL 1.800v ........................ [Auto]
    
    MCH/ICH
    PCIE 1.500v ...........................[1.54v]
    QPI PLL 1.100v .......................[1.26]  << 1.20 should be fine
    IOH Core 1.100v .....................[1.24]  << Can probably be Stock/auto or 1.14
    ICH I/O 1.500v .......................[1.58]
    ICH Core 1.1v .........................[1.14]
    
    DRAM
    DRAM Voltage ...................1.64v  << 1.66=1.64/65 - 1.62=1.6/61
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  7. #27
    Join Date
    Feb 2011
    Location
    south africa
    Posts
    55

    Default Re: Ud3r blue screen memory management

    Quote Originally Posted by arapp View Post
    Using the settings you last posted everything is stable, by the time i saved the bios and got to windows perhaps the system was warm enough as i havent had a bsod so far, i'll see what happens on the next cold boot, setting the timing shows correct 9-9-9-24 However my Cpu is now overclocked to 3.2ghz thats what is shows in windows and i am just using the stock fan so i am sitting at 45-45C at idle, not really what i would like it to be. I'd prefer it to be at normal 2.8ghz although i should probably get a better cooler. Thanks for the help so far, I'll update you again when i cold boot next.
    You could also drop cpu ratio to 14x for 2800mhz with my settings and reduce cpu voltage to 1.25v . Getting a good cooler is a fine idea , Im using Zalman CNPS10X Flex - performs well for the price , doesn't come with a fan so you need to buy that too . I'm running mine with 2000 rpm fan and letting bios control fan speed with " Voltage " option not PWM ( unless you have PWM fan which has 4 wires instead of 3 ) , I think that's under the Hardware Monitor option . Then fan runs at about 800 rpm at idle and 1300 rpm at load , not too noisy , as 2000rpm would be waaay too noisy .

    @LSD - I'm just talking from my own experience with getting 6gb Corsair kit to work @ 1600 mhz , 1.35 wouldn't work for me and it eventually got stable at 1.42v QPI . I couldn't get even one kit to work at rated settings with default cpu clock , thus the overclock settings . It seems that for DDR1600 you need at least 3200mhz uncore ( 24 x 133 @ default cpu clock ) and for stability you need QPI link speed to be slightly more than twice that . Dunno - - just saying what worked for me .
    Last edited by fredeb; 04-21-2011 at 07:22 PM.
    Xeon E5620 @ 225x18 1.325v | Corsair XMS3 1800 8-8-8-248 @ 1.66v / QPI 1.52v | Gigabyte X58A-UD3R ver 2.0 | GTX295

  8. #28
    Join Date
    Apr 2011
    Location
    wisconsin
    Posts
    17

    Default Re: Ud3r blue screen memory management

    Back to the drawing board, this morning on cold boot the blue overclock light went on and off taking a bit longer than normal to post. Then as windows was starting up got bsod system service exception 0x03B, let it restart twice and saw 0x7F followed by 0x1E finally and had to power off cmos, blue oc light went on and off and posting was taking some effort and must have gone back to fail safe settings as the blue light was off and once in windows timings were back to 7 7 7 20
    Last edited by arapp; 04-21-2011 at 09:07 PM.

  9. #29
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Ud3r blue screen memory management

    You might do better by simply switching to another brand,you shouldn't need 1.4+ voltage for ram @1600mhz imo,I run my ram fine @1800mhz and 1600mhz with 1.32v and 1.3v qpi,I know its all down to each cpu's integrated memory controller but some makes of ram simply work out of the packet better than others,you could have a poor quality batch of ram too,you wanna try some mushkin or ocz,not the cheaper ocz though
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  10. #30
    Join Date
    Feb 2011
    Location
    south africa
    Posts
    55

    Default Re: Ud3r blue screen memory management

    By what you're saying I can only deduce that your motherboard doesn't like this RAM . Is there any way you can possibly test with a different kit ? At least that way we can find the culprit ie. mobo or ram . Kingston HyperX Blu 6gb 1600 set works on my X58A-UD3R ver 2.0 and runs at the timings your kit is rated at and faster , plus this set is reasonably priced .
    Xeon E5620 @ 225x18 1.325v | Corsair XMS3 1800 8-8-8-248 @ 1.66v / QPI 1.52v | Gigabyte X58A-UD3R ver 2.0 | GTX295

Page 3 of 5 FirstFirst 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •