Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 36

Thread: Gigabyte X58A-UD3R + 12gb (2x 3x2GB Corsair Dominator C7 1600mhz DDR3) Crashing




  1. #21
    Join Date
    Apr 2011
    Location
    Melbourne
    Posts
    20

    Default Re: Gigabyte X58A-UD3R + 12gb (2x 3x2GB Corsair Dominator C7 1600mhz DDR3) Crashing

    Currently the Turnarounds are (Channel A/B/C)
    >>Reads followed by reads
    Different DIMMS 6
    Different Ranks 5
    On the same rank 1
    >>writes followed by writes
    Different DIMMS 6
    Different Ranks 6
    On the same rank 1

  2. #22
    Join Date
    Apr 2011
    Location
    Melbourne
    Posts
    20

    Default Re: Gigabyte X58A-UD3R + 12gb (2x 3x2GB Corsair Dominator C7 1600mhz DDR3) Crashing

    Was the guy I brought it off, ASUS board if i'm not mistaken, will ask.

  3. #23
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Gigabyte X58A-UD3R + 12gb (2x 3x2GB Corsair Dominator C7 1600mhz DDR3) Crashing

    Also if you have CU tweaker, see what B2B CAS Delay is and try a bit higher.
    Last edited by Chike; 04-18-2011 at 08:18 PM.

  4. #24
    Join Date
    Apr 2011
    Location
    Melbourne
    Posts
    20

    Default Re: Gigabyte X58A-UD3R + 12gb (2x 3x2GB Corsair Dominator C7 1600mhz DDR3) Crashing

    my B2B is '-', whatever that means.

  5. #25
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Gigabyte X58A-UD3R + 12gb (2x 3x2GB Corsair Dominator C7 1600mhz DDR3) Crashing

    Disabled I guess, try 10 and up.

  6. #26
    Join Date
    Apr 2011
    Location
    Melbourne
    Posts
    20

    Default Re: Gigabyte X58A-UD3R + 12gb (2x 3x2GB Corsair Dominator C7 1600mhz DDR3) Crashing

    fails to POST, doesn't even load up USB's or screen before restarting and giving me a overclock warning.
    I'll post the table again with the current settings.
    EDIT: Of note, the Round Trip Latency's were mysteriously around the 70's instead of 59


    Code:
    Advanced CPU Features: 
    CPU Clock Ratio ................................ [21x] 
    Intel(R) Turbo Boost Tech .................. [Auto] 
    CPU Cores Enabled ............................ [All] 
    CPU Multi Threading .......................... [Enabled] 
    CPU Enhanced Halt (C1E) ................... [Auto] 
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Auto]
    CPU EIST Function ............................ [Auto] 
    Virtualization Technology ................... [Disabled] << Disabled if you do not use Vmware or Virtual PC Programs 
    Bi-Directional PROCHOT ..................... [Auto]   
    
    Uncore & QPI Features: 
    QPI Link Speed .............................. x44 
    Uncore Frequency ..........................  25x
    Isonchronous Frequency ..................[Not Present]   
    
    Standard Clock Control: 
    Base Clock (BCLK) Control ................ [Enabled] 
    BCLK Frequency (MHz) .....................133 
    PCI Express Frequency (MHz) ........... [Auto]  
    C.I.A.2 [Not Present]  
    
    Advanced Clock Control: 
    CPU Clock Drive ..............................[800mV] 
    PCI Express Clock Drive ................... [900mV] 
    CPU Clock Skew ............................. [0ps] 
    IOH Clock Skew ............................. [0ps]   
    
    Advanced DRAM Features: 
    Performance Enhance ...................... [Turbo] 
    Extreme Memory Profile (X.M.P) ......... [Disabled] 
    System Memory Multiplier (SPD) ........ [12.0] 
    DRAM Timing Selectable (SPD) .......... [Expert]  
    
    Channel A + B + C  Channel A Timing Settings: ##Channel A Standard Timing Control## 
    CAS Latency Time ......................8 
    tRCD .......................................8 
    tRP .........................................8 
    tRAS .......................................24  
    
    ##Channel A Advanced Timing Control##
    tRC ........................................41
    tRRD .......................................6 
    tWTR ......................................6 
    tWR ........................................12
    tWTP .......................................24 
    tWL ........................................8 
    tRFC .......................................88 
    tRTP .......................................6 
    tFAW ......................................30 
    Command Rate (CMD) ................2  
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................59  
    B2B CAS Delay .......................... 11   
    
    Advanced Voltage Control:  CPU 
    Load Line Calibration ................. [Level 1] 
    CPU Vcore ...............................[Normal]  
    DVID........................................+0.000000
    QPI/VTT Voltage 1.175v ............1.435V
    CPU PLL 1.800v .......................1.800  
    
    MCH/ICH 
    PCIE 1.500v ...........................1.660V
    QPI PLL 1.100v .......................[AUTO] 
    IOH Core 1.100v .....................1.2 
    ICH I/O 1.500v .......................[AUTO] 
    ICH Core 1.1v ........................[AUTO]
    Last edited by Oddalicious; 04-18-2011 at 09:01 PM.

  7. #27
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: Gigabyte X58A-UD3R + 12gb (2x 3x2GB Corsair Dominator C7 1600mhz DDR3) Crashing

    What is the BSOD error message that you are getting?

    You said all 12gb ram worked in another motherboard? Was the cpu in that motherboard. The memory controller is in the cpu now not the motherboard. Motherboard will have something to do with the ram working or not but the cpu would have a bigger in-pack on getting them to work.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  8. #28
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Gigabyte X58A-UD3R + 12gb (2x 3x2GB Corsair Dominator C7 1600mhz DDR3) Crashing

    Leave B2Bauto for now.
    First set Performance Enhance to standard.
    If you still get errors try tRFC 90-100.
    If you still get errors try to set max value of turnaround Different DIMMs, 8 I thik.

    If all this does not help I'd go and try to get 4 DIMMs in Channels A & B to work first.

  9. #29
    Join Date
    Apr 2011
    Location
    Melbourne
    Posts
    20

    Default Re: Gigabyte X58A-UD3R + 12gb (2x 3x2GB Corsair Dominator C7 1600mhz DDR3) Crashing

    Yes, all but the motherboard was included, he was getting quite worried that he may have sold me faulty stuff, so everything got repeatedly checked, this is the second UD3R to have problems with it. Everything has been tested.

  10. #30
    Join Date
    Apr 2011
    Location
    Melbourne
    Posts
    20

    Default Re: Gigabyte X58A-UD3R + 12gb (2x 3x2GB Corsair Dominator C7 1600mhz DDR3) Crashing

    I discovered that the Round Trip Latency being at 59 was what was causing the pc to fail POST, set it back to AUTO and it boots

Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •