Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: GA-P67A-UD4-B3 Ram trouble

  1. #11
    Join Date
    Apr 2011

    Default Re: GA-P67A-UD4-B3 Ram trouble

    So with the 1 stick I disabled the XMP, changed the timing to 8-8-8-24, and set the QPI/VTT to 1.2v.

    I placed a second stick of ram in the DDR3-2 slot and it booted for maybe 5 secs then turned off and went into its loop...

    no dice :(

  2. #12
    Chike is online now Senior Member
    Join Date
    Jun 2009

    Default Re: GA-P67A-UD4-B3 Ram trouble

    Up to don't mean it would have to be all the way.
    Maybe default settings (optimized defaults and XMP disabled, timings on auto), and test just 1 stick at each alot, to make sure there no problem with any of them.
    Run memtest86+ for each slot you test.
    Then with default settings 2 sticks, and increase VTT gradually from default 0.01 or 0.005 increments.

    G.Skill site list the board compatible so they must have tested it. Could be bad set or board.

  3. #13
    Join Date
    Feb 2011

    Default Re: GA-P67A-UD4-B3 Ram trouble

    Maybe you can try with these timings:

    RAM voltage: 1.400V
    CAS: 7
    tRCD: 8
    tRP: 7
    tRAS: 24
    tRC: AUTO
    tRRD: 5
    tWTR: 6
    tWR: 10
    tWTP: 21
    tWL: 7
    tRFC: 88
    tRTP: 6
    tFAW: 24
    CMD: 2
    IO Latency: AUTO
    Round Trip Latency: 33

    My 4x G.SKILL RAMs are working fine with these timings on my P67A-UD3-B3.

  4. #14
    Join Date
    Apr 2011

    Thumbs up Re: GA-P67A-UD4-B3 Ram trouble

    Hey Guys-

    I wanted to let you all know that I fixed my problem.
    I bought this ram:

    Same problem. So by the process of elimination I decided to buy a new motherboard:

    Since installing it, everything is much more stable and I can fit at least 8gigs (will test more later).
    Unfortunately, I had to reinstall windows and I have to return a lot of hardware. But at least my system is stable. And, oddly enough, the ram is much much quieter...

    This motherboard seems to be better anyway. Has a nice manual ;)

    Thanks for helping!

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    PCB Island

    Default Re: GA-P67A-UD4-B3 Ram trouble

    Glad to hear you have a stable running system now, sorry to hear you had to jump ship :)

  6. #16
    Join Date
    Dec 2011
    Hamilton, NZ

    Default Re: GA-P67A-UD4-B3 Ram trouble

    Mate I just started to read your thread. An i felt sorry for you. People want to help but they really don't.
    You got it right in the end. The answer lies in not what's wrong but what isn't. Solving is elimination.

    Start from scratch. PSU MB and CPU. Put the MB speaker on. Turn it on, should get a beep!!?!!
    Then try ur DIMMS in different orders etc. 1 by 1 put all four in each slot then diff pairs in..1+2,1+3,1+4,2+3,2+4,3+4...2nd clue!(beep?)
    Add display,get display? No, have ram tested. if comes back fine its your MCH and they'll proly replace it unless the find your tuning has caused the north bridge/MCH?P67's short life.
    Yes, restore bios to default!!!!!!!!
    **Any struggle entering bios will be chip compatibility (MB manufacturer support will state CPU support list and its respective required BIOS)
    --> GIGABYTE TECHNOLOGY Socket 1155 - Intel P67 - GA-P67A-UD4-B3 (rev. 1.1)

    if you still have issues here its a case of formatting your drive total clean O.S. install,
    followed by clean driver installs. Use the disc you can update drivers later.

    My pushed a lil hard or bent a pin.. or could have given your MB a static shock.

    What Id like to ask is do you still have the MB??

    I have the same one and id like the broken one if you do.



    "..War ends, only for the dead.."

  7. #17
    Join Date
    Feb 2009

    Default Re: GA-P67A-UD4-B3 Ram trouble

    Beachy, you realize how OLD this thread is? You bumped an 8 month old thread....i HIGHLY DOUBT the person needs your help by now, especially since he's on a new build...

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts