Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: EP45-UD3L - RAM problems




  1. #11
    Join Date
    Jan 2011
    Location
    Memory Slot #2
    Posts
    17

    Default Re: EP45-UD3L - RAM problems

    I see, haven't thought about that honestly.
    so what's the point of the address mapping? just a logical map?

  2. #12
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45-UD3L - RAM problems

    If you know the way the addresses are interleaved you can find which module it is.

  3. #13
    Join Date
    Jan 2011
    Location
    Memory Slot #2
    Posts
    17

    Default Re: EP45-UD3L - RAM problems

    Just a small update, I tried switching the sticks (for no apparent reason :) ), got the MCH Core up to 1.2 as suggested.
    First night of memtest went smooth, i'll keep stressing it more , and see if it holds.

    Excuse my ignorance, but the extra 0.1v can really make such a difference?
    I mean, it's not like the system didn't work, or completely crashed, but some errors occurred pretty randomly, and not during high system loads as I would expect.

    Thanks for the help so far

  4. #14
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45-UD3L - RAM problems

    Yes, that can make the difference between unstable and stable, or somewhat stable system.
    I say somewhat stable because memtest86+ is not a real stress test, and some windows applications may put much more stress on memory, like vode oncoders or compression software.
    But every 0.02v may count, and 0.09 is 8.1 percent of 1.1 which is quite a lot.
    It's recommeneded that you run 6-8 hors of Prime95 blend torture to make sure it's stable.

  5. #15
    Join Date
    Jan 2011
    Location
    Memory Slot #2
    Posts
    17

    Default Re: EP45-UD3L - RAM problems

    After 2 nights of memtest and 22 hours of P95 blend test, so far so good :)
    So first of all, thanks a lot Chike! even if it's not completely solved, it's way more stable than before..
    can you recommend some other good memory benchmark? just to make sure, as I noticed P95 never went over 1.7GB of ram while running...

    Thanks again :)

  6. #16
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45-UD3L - RAM problems

    I use MaxxMEM² - PreView for memory benchmark.
    The blend sets 1600MB of memory to use, if you want to use more you can select custom after blend and change it.
    You may try to set Performance Enhance Turbo now and see if you get better performance and if it's still stable.

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •