Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 10 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 91

Thread: EP45-UD3LR + Intel Q9550 @ 3.4 Ghz proper settings please




  1. #31
    Join Date
    May 2011
    Location
    Over the Rainbow
    Posts
    66

    Default Re: EP45-UD3LR + Intel Q9550 @ 3.4 Ghz proper settings please

    But 43C is with opened case only.
    The vcore is shown in the screenshots: 1.184, which is definitely not true. In the bios it is 1.204 (vcore set to auto) on idle.
    Gigabyte Z68XP-UD3P bios ver. F5
    Intel i7-2600K @ 4.4 Ghz 24/7
    Prolimatech Megahalems Rev. C + Zaward Golf 2
    Kingston HyperX 4GB (2 x 2GB) 240-Pin DDR3 1600 Memory Model KHX1600C9D3K2/4GX
    Gigabyte GT220 1GB GDDR3 PCIE

  2. #32
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45-UD3LR + Intel Q9550 @ 3.4 Ghz proper settings please

    But the screenshot was at idle, is it the same under load?

  3. #33
    Join Date
    May 2011
    Location
    Over the Rainbow
    Posts
    66

    Default Re: EP45-UD3LR + Intel Q9550 @ 3.4 Ghz proper settings please

    Due to cpu-z it is always the same vcore.

    Core temp and Everest says: 1.1250.... I think neither of these is true.
    Last edited by hyperpower; 05-20-2011 at 07:30 AM.
    Gigabyte Z68XP-UD3P bios ver. F5
    Intel i7-2600K @ 4.4 Ghz 24/7
    Prolimatech Megahalems Rev. C + Zaward Golf 2
    Kingston HyperX 4GB (2 x 2GB) 240-Pin DDR3 1600 Memory Model KHX1600C9D3K2/4GX
    Gigabyte GT220 1GB GDDR3 PCIE

  4. #34
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45-UD3LR + Intel Q9550 @ 3.4 Ghz proper settings please

    This could be if you don't have LLC enabled.
    Just check VTT and PLL in EasyTune to make sure they are not set too high, normal would be better than auto for PLL.

  5. #35
    Join Date
    May 2011
    Location
    Over the Rainbow
    Posts
    66

    Default Re: EP45-UD3LR + Intel Q9550 @ 3.4 Ghz proper settings please

    LLC is enabled in the bios.



    are these values are fine ?
    Last edited by hyperpower; 05-20-2011 at 07:47 AM.
    Gigabyte Z68XP-UD3P bios ver. F5
    Intel i7-2600K @ 4.4 Ghz 24/7
    Prolimatech Megahalems Rev. C + Zaward Golf 2
    Kingston HyperX 4GB (2 x 2GB) 240-Pin DDR3 1600 Memory Model KHX1600C9D3K2/4GX
    Gigabyte GT220 1GB GDDR3 PCIE

  6. #36
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45-UD3LR + Intel Q9550 @ 3.4 Ghz proper settings please

    You should be good with PLL normal (1.55), all the rest are fine.
    How is memory set? If all auto it can probably be optimuzed.
    Please post a screen capture of MemSet main window.

  7. #37
    Join Date
    May 2011
    Location
    Over the Rainbow
    Posts
    66

    Default Re: EP45-UD3LR + Intel Q9550 @ 3.4 Ghz proper settings please

    Auto as far as I remember.

    So you think I should set the vcore in the bios from auto to normal ? Where to set the PLL to normal in the bios, could you tell me the exact name of it ?
    Gigabyte Z68XP-UD3P bios ver. F5
    Intel i7-2600K @ 4.4 Ghz 24/7
    Prolimatech Megahalems Rev. C + Zaward Golf 2
    Kingston HyperX 4GB (2 x 2GB) 240-Pin DDR3 1600 Memory Model KHX1600C9D3K2/4GX
    Gigabyte GT220 1GB GDDR3 PCIE

  8. #38
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45-UD3LR + Intel Q9550 @ 3.4 Ghz proper settings please

    Vcore is currently set to 1.225, is this the default shown in BIOS? If not the machine may become unstable at 3.4GHz, if it is it may be OK, but when set to normal and C1E and EIST enabled vcore is lowered when the system is idleand it may cause instability too.

    CPU PLL is in BIOS M.I.T, just below CPU Termination and vcore.

  9. #39
    Join Date
    May 2011
    Location
    Over the Rainbow
    Posts
    66

    Default Re: EP45-UD3LR + Intel Q9550 @ 3.4 Ghz proper settings please

    I checked the LLC it was enabled all the time.
    Here's the result with the next changes:

    - vcore is set to normal now
    - LLP is set to 1.5500




    The cpu temp is lowered by 6-7C!

    Under load the vcore is 1.12500 with oc'd to 3.33GHz, should I raise it a bit or this is fine if the linx didn't freeze ?

    update #1: I set the LLP to normal, it is on 1.5500 with this config too.
    Last edited by hyperpower; 05-20-2011 at 05:54 PM.
    Gigabyte Z68XP-UD3P bios ver. F5
    Intel i7-2600K @ 4.4 Ghz 24/7
    Prolimatech Megahalems Rev. C + Zaward Golf 2
    Kingston HyperX 4GB (2 x 2GB) 240-Pin DDR3 1600 Memory Model KHX1600C9D3K2/4GX
    Gigabyte GT220 1GB GDDR3 PCIE

  10. #40
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45-UD3LR + Intel Q9550 @ 3.4 Ghz proper settings please

    If you still get 46.5GFlops with 3.4GHz than it's all good, otherwise you may need more vcore, but don't let auto decide, set it manually to as much that is needed.
    For best comparison run LinX with 3072MB.

    So the temps are 20c lower than they were before, not bad at all.

Page 4 of 10 FirstFirst ... 23456 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •