Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 35

Thread: Need help getting UD3R+E8400 to 4.0!




  1. #1
    Join Date
    Mar 2011
    Location
    Estonia
    Posts
    16

    Default Need help getting UD3R+E8400 to 4.0!

    Hey guys

    I'm currently on this setup (thanks to Outer Marker ):

    Memory is A-Data 4GB 800G. Rated at 800MHz 5-5-5-12 @ 1.9V.

    Code:
    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio .......................: [   9]
    Fine CPU Clock Ratio...................:  +0.0
    CPU Frequency .........................: 3.83GHz
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control.................: [Enabled] 
    CPU Host Frequency (Mhz) ..............:  426Mhz 445 if trying 4.0GHz
    PCI Express Frequency (Mhz) ...........:  100
    
    C.I.A.2 ...............................: [Disabled]
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive........................: 800mV
    PCI Express Clock Drive................: 900mV
    CPU Clock Skew (ps)....................:   0ps
    MCH Clock Skew (ps)....................:   0ps
    
    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................:  Auto
    System Memory Multiplier ..............:  2.00D 
    Memory Frequency (Mhz) ................:  852
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time.......................: 5
    tRCD ..................................: 5
    tRP'...................................: 5
    tRAS...................................: 15
    
    Advanced Timing Control
    tRRD...................................: 3 [Auto]
    tWTR...................................: 3 [Auto]
    tWR....................................: 6 [Auto]
    tRFC...................................: 52 [Auto]
    tRTP...................................: 3 [Auto]
    Command Rate (CMD) ....................: 0 [Auto]
    
    Driving Strength Profiles
    Driving Strength ......................: [Auto]
    
    Channel A
    Static tRead Value.....................:  11  [Auto]
    tRD Phase0 Adjustment..................:  6 [Auto]
    tRD Phase1 Adjustment..................:  6 [Auto]
    tRD Phase2 Adjustment .................:  5 [Auto]
    tRD Phase3 Adjustment..................:  8 [Auto]
    
    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]
    
    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]
    
    Channel B
    Static tRead Value.....................:  11  [Auto]
    tRD Phase0 Adjustment..................:  6 [Auto]
    tRD Phase1 Adjustment..................:  6 [Auto]
    tRD Phase2 Adjustment .................:  5 [Auto]
    tRD Phase3 Adjustment..................:  8 [Auto]
    
    Trd2rd(Different Rank).................: [Auto]
    Twr2wr(Different Rank).................: [Auto]
    Twr2rd(Different Rank).................: [Auto]
    Trd2wr(Same/Diff Rank).................: [Auto]
    
    Dimm1 Clock Skew Control...............: [Auto]
    Dimm2 Clock Skew Control...............: [Auto]
    DDR Write Training.....................: [Auto]
    
    Motherboard Voltage Control
    Voltage Type...........................: [Manual]
    
    CPU---------------------Normal-----------Current
    
    Load Line Calibration..................: [Disabled]
    CPU Vcore...............1.25000V.......: 1.28750V 1.30000V if trying with 4.0GHz
    CPU Termination.........1.200V.........: 1.220V
    CPU PLL.................1.500V.........: 1.500V
    CPU Reference...........0.760V.........: [Auto]  
    
    MCH/ICH
    MCH Core................1.100V.........: 1.220V
    MCH Reference...........0.760V.........: [Auto]
    MCH/DRAM Reference......0.900V.........: [Auto]
    ICH I/O.................1.500V.........: 1.500V
    ICH Core................1.100V.........: 1.100V
    
    DRAM
    DRAM Voltage............1.800V.........: 1.900V
    DRAM Termination........0.900V.........: [Auto]
    Channel A Reference.....0.900V.........: [Auto]
    Channel B Reference.....0.900V.........: [Auto]
    Now thing is, I've tried using exactly the same settings with 4.0GHz, only with a voltage increase to 1.30000V. It boots up into windows and I can play a few games, but after a while I eventually get a BSOD under heavy load.

    Thing is, I don't know what to increase and how much to do so. I'm guessing that 1.30000 vcore can stay, as for the rest - I don't know, I know I have to do something with the memory and stuff, but oh well.

    Need some help guys, would appreciate it. :)

    -th3guardian
    Last edited by Th3guardian; 05-25-2011 at 04:03 AM.

  2. #2
    Join Date
    Jan 2009
    Location
    Colorado, USA
    Posts
    88

    Default Re: Need help getting UD3R+E8400 to 4.0!

    That RAM is rated at 800MHz and your running it at 852+?? That could be your problem... Also try ticking PCI Express to 101 or 102.
    Are you using Load Line Calibration?
    Also can you post your system specs in your sig?
    __________________
    GA-P67A-UD4-B3(v1.1) - F4 BIOS
    Intel Core i5-2500K - Corsair H50 p/p
    Mushkin Blackline DDR3-1600 @ 9-9-9-24 1.35v
    OCZ Vertex 2 60GB 34nm SSD - Maxtor 320GB
    Gigabyte GTX 460 SuperOverclock 1GB
    Corsair TX650W PSU
    Windows 7 HP 64-bit - SP1
    Antec 300 Case - Maxed out fans

    "The files are IN the computer ... It's SO SIMPLE!"

  3. #3
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Need help getting UD3R+E8400 to 4.0!

    Can you post a screen capture of MemSet main window?
    Memory settings are far from optimized.
    Have you ran Prime95 turtores, which and for how long if you have?
    Other, tests like IBT/LinX?
    The memory will probably need a bit higher voltage.

  4. #4
    Join Date
    Mar 2011
    Location
    Estonia
    Posts
    16

    Default Re: Need help getting UD3R+E8400 to 4.0!

    Yeah, running it at 852, how else would I run it though, as I'm on 426x9. And would that pci-e 101 or 102 really help? :D Load-line calibration is disabled also, from what I've heard it's only useful in the upper vcores (higher than 1.35 or something).

    I'll post the memtest pic soon lads!
    EP45-UD3R F12
    Intel Core 2 Duo E8400 @ 4.00GHz 445x9 - AC Freezer 7 Pro
    A-Data 2x2GB 800G-series DDR2-890 @ 5-5-5-15 2.00v
    A little WD 250GB
    GTX 260 Core 216 682/1221MHz
    Silver Power Green 650W
    Windows 7 Ultimate 32bit

  5. #5
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Need help getting UD3R+E8400 to 4.0!

    MemSet not memtest, you can download it from http://forums.tweaktown.com/gigabyte...ity-tools.html

  6. #6
    Join Date
    Jan 2009
    Location
    Colorado, USA
    Posts
    88

    Default Re: Need help getting UD3R+E8400 to 4.0!

    I think you're going to need higher MHz ram for 4.0ghz
    PCI at 101 has helped many with a stability issue.
    Also try upticking the CPU and MCH Clock skews to 90ps and try, you may need more skew
    Last edited by SeanDude05; 05-25-2011 at 05:01 AM.
    __________________
    GA-P67A-UD4-B3(v1.1) - F4 BIOS
    Intel Core i5-2500K - Corsair H50 p/p
    Mushkin Blackline DDR3-1600 @ 9-9-9-24 1.35v
    OCZ Vertex 2 60GB 34nm SSD - Maxtor 320GB
    Gigabyte GTX 460 SuperOverclock 1GB
    Corsair TX650W PSU
    Windows 7 HP 64-bit - SP1
    Antec 300 Case - Maxed out fans

    "The files are IN the computer ... It's SO SIMPLE!"

  7. #7
    Join Date
    Mar 2011
    Location
    Estonia
    Posts
    16

    Default Re: Need help getting UD3R+E8400 to 4.0!

    Hmm alright guys, I'll try 101 PCI-e once I know what to do with the other settings aswell (once you guys help me out with 'em). And is upticking the clock skew to 90ps a good idea?

    Here's MemSet though: (I ran 20 minutes of MemTest (lol) and it seemed to be stable with 0 errors)




    Thanks!
    EP45-UD3R F12
    Intel Core 2 Duo E8400 @ 4.00GHz 445x9 - AC Freezer 7 Pro
    A-Data 2x2GB 800G-series DDR2-890 @ 5-5-5-15 2.00v
    A little WD 250GB
    GTX 260 Core 216 682/1221MHz
    Silver Power Green 650W
    Windows 7 Ultimate 32bit

  8. #8
    Join Date
    Jan 2009
    Location
    Colorado, USA
    Posts
    88

    Default Re: Need help getting UD3R+E8400 to 4.0!

    a little skew will help sync your clocks.
    also is that ram stock at 1.9v? If so you're going to need to bump up the ram voltage if your pushing it past 800...

    have you ran prime95? LinX? What are your temps?
    __________________
    GA-P67A-UD4-B3(v1.1) - F4 BIOS
    Intel Core i5-2500K - Corsair H50 p/p
    Mushkin Blackline DDR3-1600 @ 9-9-9-24 1.35v
    OCZ Vertex 2 60GB 34nm SSD - Maxtor 320GB
    Gigabyte GTX 460 SuperOverclock 1GB
    Corsair TX650W PSU
    Windows 7 HP 64-bit - SP1
    Antec 300 Case - Maxed out fans

    "The files are IN the computer ... It's SO SIMPLE!"

  9. #9
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Need help getting UD3R+E8400 to 4.0!

    As you can see tRD(Performance Level in MemSet, Static tRead Valu in BIOS) is grayed/disabled.
    Try to set it to a value in the range 12-9. Begin hige and keep trying lower, both channels.
    Usually it will not boot at too low value and work at the one above it, but sometimes need to be 2 values up.
    This is a performance settings, you can see increase in bandwidth and lower latencies with memory benchmarks, like MaxxMEM² - PreView, or other.
    Run Prime95 blend torture 8+ hours on the lowest setting you find.

  10. #10
    Join Date
    Mar 2011
    Location
    Estonia
    Posts
    16

    Default Re: Need help getting UD3R+E8400 to 4.0!

    Nope, ram is 1.8v @stock.

    I haven't ran prime95 yet, because I'm kinda lazy and (although I could leave the PC on for the night) I am pretty sure the system is stable currently (with the 3.83 Stable OC by Outer Marker). Would you guys happen to know if I need to increase any other voltages? And also, what about those driving strength profiles?

    Cheers!
    EP45-UD3R F12
    Intel Core 2 Duo E8400 @ 4.00GHz 445x9 - AC Freezer 7 Pro
    A-Data 2x2GB 800G-series DDR2-890 @ 5-5-5-15 2.00v
    A little WD 250GB
    GTX 260 Core 216 682/1221MHz
    Silver Power Green 650W
    Windows 7 Ultimate 32bit

Page 1 of 4 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •