Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: Gigabyte EP45C-DS3R (2x2GB Kingston Hyperx Blu DDR3 1600MHz) problem




  1. #1
    Join Date
    Jun 2011
    Location
    Israel
    Posts
    3

    Default Gigabyte EP45C-DS3R (2x2GB Kingston Hyperx Blu DDR3 1600MHz) problem

    Hello ,

    I bought yesterday 2x2GB Kingston Hyperx Blu DDR3 1600MHz ,I know that my motherboard supports ddr3 1600MHz , after I installed the two pieces my computer starts to beep or reset , then I tried to install just one piece and then it worked the pc recognized it ,I changed the DRAM Voltage to 1.64v and then installed the second ram and the pc then recognized the two rams , my problem now that my computer freezes at the loading of the windows (at the black screen with the window picture) sometimes freezes when it enters the windows .

    are there any tweeks that I should do ?


    FullSystem Specs:
    Gigabyte GA-EP45C-DS3R
    Intel Core 2 Quad Q6600
    Kingston KHZ1600C9AD3B1/2G (2x2GB)
    Palit 9800 GT 512MB
    600W PC Power & Cooling PSU
    Windows 7 (32-bit)


    BIOS Settings:

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 8x
    CPU Frequency ...........................: 2.13GHz (266x8)


    Clock Chip Control

    CPU Host Clock Control..................: Disabled
    CPU Host Frequency (Mhz) ............: 333MHz ( gray color)
    PCI Express Frequency (Mhz) .........: Auto
    C.I.A.2 .................................: Turbo


    Advanced Timing Control
    tRRD........................................... Auto (4)
    tWTR.......................................... Auto (5)
    tWR............................................ Auto (10)
    tRFC........................................... Auto (74)
    tRTP........................................... Auto (5)
    Command Rate (CMD) .................... Auto (0)



    DRAM Performance Control
    Performance Enhance...................: Extreme
    Extreme Memory Profile (X.M.P.).....: I don't have this option
    (G)MCH Frequency Latch...............: Auto
    System Memory Multiplier (SPD) ..............: Auto
    Memory Frequency (Mhz) ..............: 1333 1066
    DRAM Timing Selectable (SPD)................: Manual

    Standard Timing Control
    CAS Latency Time........................ 9
    tRCD ......................................... 9
    tRP'........................................... 9
    tRAS.......................................... 24


    Channel A
    Static tRead Value.........................: Auto (5)
    tRD Phase0 Adjustment...................: Auto (0)
    tRD Phase1 Adjustment...................: Auto (0)
    tRD Phase2 Adjustment .................: Auto (0)
    tRD Phase3 Adjustment..................: Auto (0)<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>


    Trd2rd(Different Rank)....................: Auto (9)
    Twr2wr(Different Rank)...................: Auto (7)
    Twr2rd(Different Rank)...................: Auto (8)
    Trd2wr(Same/Diff Rank)..................: Auto (8)<o:p></o:p>


    Dimm1 Clock Skew Control...............: Auto
    Dimm2 Clock Skew Control...............: Auto
    DDR Write Leveling……………………….: Auto<o:p></o:p>

    DDR WriteTraining………………………: Auto<o:p></o:p>


    Channel B
    Static tRead Value.........................:Auto(5)
    tRD Phase0 Adjustment...................: Auto (0)
    tRD Phase1 Adjustment...................: Auto (0)
    tRD Phase2 Adjustment .................: Auto (0)
    tRD Phase3 Adjustment..................: Auto (0)<o:p></o:p>


    Trd2rd(Different Rank)....................: Auto (9)
    Twr2wr(Different Rank)...................: Auto (7)
    Twr2rd(Different Rank)...................: Auto (8)
    Trd2wr(Same/Diff Rank)..................: Auto (8)<o:p></o:p>


    Dimm1 Clock Skew Control...............: Auto
    Dimm2 Clock Skew Control...............: Auto
    DDR Write Leveling……………………….: Auto<o:p></o:p>

    DDR WriteTraining………………………: Auto<o:p></o:p>


    Motherboard Voltage Control
    Voltage Type.………... Manual

    CPU
    CPU Vcore….……….........1.32500V....: Auto
    CPU Termination…..... 1.200V*.......: Auto
    CPU PLL…………………....1.500V*.......: Auto
    CPU Reference.…………....0.760V*.......: Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.300v
    MCH Reference….…….0.760V...........: Auto
    MCH/DRAM Ref.…......0.750V...........: Auto
    ICH I/O……………….....1.500V............: Auto
    ICH Core…………...……1.100V............: I don't have this option

    DRAM
    DRAM Voltage ……....1.500............: 1.640v
    DRAM Termination .…0.750V............: Auto
    Channel A Reference 0.750V............: Auto
    Channel B Reference 0.750V............: Auto


    <o:p></o:p>

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Gigabyte EP45C-DS3R (2x2GB Kingston Hyperx Blu DDR3 1600MHz) problem

    First thing to do is load optimized defaults, set Performance Enhance to standard.
    Second void C.I.A.2, if you want to overclock do it manually.
    Set RAM Voltage as needed, and one click up MCH Core to start with.
    At default FSB maximum possible DDR is 1066, for DDR-1600 you will need to run with 400MHz FSB.

    Please post a screen capture of MemSet main and SPD(click spd) windows.
    Also fill your forum sgnature with the system specs, and please review the ram model, google search for only finds this thread :-)

  3. #3
    Join Date
    Jun 2011
    Location
    Israel
    Posts
    3

    Default Re: Gigabyte EP45C-DS3R (2x2GB Kingston Hyperx Blu DDR3 1600MHz) problem

    Quote Originally Posted by Chike View Post
    First thing to do is load optimized defaults, set Performance Enhance to standard.
    Second void C.I.A.2, if you want to overclock do it manually.
    Set RAM Voltage as needed, and one click up MCH Core to start with.
    At default FSB maximum possible DDR is 1066, for DDR-1600 you will need to run with 400MHz FSB.

    Please post a screen capture of MemSet main and SPD(click spd) windows.
    Also fill your forum sgnature with the system specs, and please review the ram model, google search for only finds this thread :-)
    Gigabyte EP45C-DS3R (2x2GB Kingston Hyperx Blu DDR3 1600MHz) problem-memset-jpg

    Changes I made :
    C.I.A.2 .................................: Disable
    System Memory Multiplier (SPD) ..............: 400MHz

    tRAS.......................................... 27
    MCH Core…………….....1.100V...........: 1.200v
    and I kept DRAM Voltage ……....1.640v

    and it worked great without any problems ,The windows didn't freeze

    Thanks for the help Chike.

  4. #4
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Gigabyte EP45C-DS3R (2x2GB Kingston Hyperx Blu DDR3 1600MHz) problem

    Have you began by loadin optimized defalts? If you don't have a RAID setup this should not be of any problem.
    Why use tRAS 27? it is 20 for 1066, you can just leave everything on auto.
    For some reaso tRD(Static tRead Value in BIOS, Performance Level in MemSet) is different for each channel, chan you check the BIOS settings?
    If you want higher DDR rate 1333 or 1600 some overclocking is nesessarry.

  5. #5
    Join Date
    Jun 2011
    Location
    Israel
    Posts
    3

    Default Re: Gigabyte EP45C-DS3R (2x2GB Kingston Hyperx Blu DDR3 1600MHz) problem

    Quote Originally Posted by Chike View Post
    Have you began by loadin optimized defalts? If you don't have a RAID setup this should not be of any problem.
    Why use tRAS 27? it is 20 for 1066, you can just leave everything on auto.
    For some reaso tRD(Static tRead Value in BIOS, Performance Level in MemSet) is different for each channel, chan you check the BIOS settings?
    If you want higher DDR rate 1333 or 1600 some overclocking is nesessarry.
    I changed tRAS to 27 because I saw it on the sticker (LOL) of the ram (9-9-9-27).I thought maybe better be 27 .
    the default is 24 .
    I will check the bios again .

  6. #6
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Gigabyte EP45C-DS3R (2x2GB Kingston Hyperx Blu DDR3 1600MHz) problem

    It is 9-9-27 for DDR-1600(800), DDR-1066(533) timings are 7-7-7-20 and don't even need all the 1.65v, maybe a bit more than 1.5v. According to the SPD 1.5v is sufficient.
    As I have already said. 1066 is max you can get with default 266MHz FSB.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •