Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: Z68X-UD4-B3 M(p)LL Question.




  1. #1
    Join Date
    Jun 2011
    Location
    Washington
    Posts
    21

    Default Z68X-UD4-B3 M(p)LL Question.

    I got this board yesterday, And I know I'm not experienced enough to just go into BIOS overly carefree. Is there a guide, or spec sheet for this board's LLC level differences?

    I've been really busy, and I prefer to get any info I can on my own. Now that I've had a little time to mess with this board, I'm not quite sure what level of LLC to go with.

    Answers would be just awesome. But If anyone can point me in a direction of maybe the Z68X-UD4-B3's LLC tables or something, I'd truely appreciate it.

    Thank for your time :)

  2. #2
    Join Date
    Jun 2011
    Location
    Washington
    Posts
    21

    Default Ethernet problem?

    I just got my Z68X-UD4-B3. My P67 UD4's ethernet was bottoming out, figure it was the port/bus, since the board was damaged. Now my Z68X's doing it. My other PC, PS3 360, roomates PC, no problems. I'm hardly an expert, but I'm stumped. Would definitely appreciate any insights.

  3. #3
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Z68X-UD4-B3 M(p)LL Question.

    What is the ethernet problem? Have you tried using different cable?

  4. #4
    Join Date
    Jun 2011
    Location
    Washington
    Posts
    21

    Default Re: Z68X-UD4-B3 M(p)LL Question.

    Sorry, I know my question was vague lol. Different cables, and router. After between 5-10min, it just goes inactive. I've disabled the Green Ethernet option under Properties, tried disabling Energy Efficient Ethernet option as well as unchecking the "Allow Windows to turn this off to save power yada yada" box. Separately, and individually.

  5. #5
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Z68X-UD4-B3 M(p)LL Question.

    I wonder if all those power saving features will ever pay up for the energy wasted by BIOS updates only.
    Does it just being inactive while working on the computer? The same happened with the P67 board?
    Try to see in event log for what happened.

  6. #6
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Z68X-UD4-B3 M(p)LL Question.

    Regarding llc,I read recent review where level 7 was found to keep voltages at what you set in the BIOS

    Using latest LAN drivers?
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  7. #7
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Z68X-UD4-B3 M(p)LL Question.

    Quote Originally Posted by wazza300 View Post
    Regarding llc,I read recent review where level 7 was found to keep voltages at what you set in the BIOS
    That was a UD7 board under load, at idle voltage was higher than set in BIOS. Strangely, level 7 were with the lowerst vdroop for some reason.
    A lot of money for LLC that cannot keep steady voltage at idle and under load IMAO.

  8. #8
    Join Date
    Jun 2011
    Location
    Washington
    Posts
    21

    Default Re: Z68X-UD4-B3 M(p)LL Question.

    I had some time to play with my boards LLC. I've read both of Sin's review. I understood, but lacked experience. Still getting it right, but making good progress.

    I've uninstalled the LAN driver and installed/tried both the driver from the mobo install disk and the Realtek driver from the Gigabyte forums here on TT.

    I have a D-Link modem, DCM-202, going to contact their support and get the latest firmware. So far it's only my PC doing this, but I might as well update it.

    I've logged into my router and did what I could. Not well versed in that area, so I kept changes minimal.

  9. #9
    Join Date
    Jun 2011
    Location
    Washington
    Posts
    21

    Default Re: Z68X-UD4-B3 M(p)LL Question.

    Quote Originally Posted by Chike View Post
    That was a UD7 board under load, at idle voltage was higher than set in BIOS. Strangely, level 7 were with the lowerst vdroop for some reason.
    A lot of money for LLC that cannot keep steady voltage at idle and under load IMAO.
    My LLC increases my vcore. PLL overvoltage enabled, auto vcore is 1.36 @x45, set it at 1.320, PLL 1.820, Level 5 LLC gives me 1.356vc idle, 1.428 under load (prime95).

    Don't know if I'm doing it right, but I like it. Still looking for lowest/stable vcore @ x45.

    Edit: Statement "My LLC Increases my vcore"... hell I don't know that for sure lmao.

  10. #10
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Z68X-UD4-B3 M(p)LL Question.

    Look on d-link website for latest firmware and update it,then see if problem persists
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •