Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 7 of 7

Thread: Q9650 & GA EP45t ud3lr & 2x2 4 gb1600 mhz cl8 O.C. HELP




  1. #1
    Join Date
    Jul 2011
    Location
    Turkey
    Posts
    6

    Default Q9650 & GA EP45t ud3lr & 2x2 4 gb1600 mhz cl8 O.C. HELP

    Mainboard : GA ep45t udl3r 2200 mhz+
    Cpu : Q 9650 3.0 Ghz
    CPU cooler : Zalman Cnps 10x extreme
    Graphic Card: GTX 260 Amp2
    Ram: Corsair Dominator 1600 mhz cl 8
    Power supply: Xilence 1000 watt
    Case : HAF 932
    [i looked this settings from the Everest program]
    1600 mhz cl8 timings
    tRRD[6].........................................[ 6 ]
    tWTR[6].........................................[ 6 ]
    tWR[12].........................................[ 12 ]
    tRFC[88]........................................[ 88 ]
    tRTP[5].........................................[ 6 ]
    Command Rate (cmd)[0]...........................[ 1 ]




    I'm suffering from blue screen problem
    Although i applied the bios settings that showed below, it cannot provide stability and i'm taking BSOD(Blue Screen of Death)

    Motherboard Intelligent Tweaker

    Robust Graphics Booster.........................[ Auto ]
    CPU Clock Ratio.................................[ 9x ]
    Fine CPU Clock Ratio............................[ + 0.0 ]
    CPU Frequency 4.14GHz...........................[ 445x9 ]

    Clock Chip Control

    CPU Host Clock Control..........................[ Enabled ]
    CPU Host Frequency (Mhz)........................[ 445 ]
    PCI Express Frequency (Mhz).....................[ Auto ]
    C.I.A 2.........................................[ Disabled ]

    Advanced Clock Control

    CPU Clock Drive.................................[ 900mv ]
    PCI Express Clock Drive.........................[ 900mv ]
    CPU Clock Skew..................................[ 0ps ]
    MCH Clock Skew..................................[ 50ps ]

    DRAM Performance Control

    Performance Enhance.............................[ Turbo ]
    Extreme Memory Profile(X.M.P.) [ Disabled ]
    (G) MCH Frequency Latch.........................[ Auto ]
    System Memory Multipler.........................[ 4.00D ]
    Memory Frequency 1066...........................[ 1780 ]
    DRAM Timing Selectable..........................[ Manual ]

    CAS Latency Time................................[ 8 ]
    tRCD............................................[ 8 ]
    tRP.............................................[ 8 ]
    tRAS............................................[ 24 ]

    tRRD[4].........................................[ 6 ]
    tWTR[5].........................................[ 6 ]
    tWR[14].........................................[ 10 ]
    tRFC[74]........................................[ 88 ]
    tRTP[5].........................................[ 6 ]
    Command Rate (cmd)[0]...........................[ 1 ]

    Channel A Timing Settings

    Static tRead Value (PL) [ ] ................[ 9 ]

    Channel B Timing Settings

    Static tRead Value (PL) [ ] ................[ 9 ]

    Motherboard Voltage Control

    Load-Line Calibration...........................[ Enabled ]
    CPU Vcore [ ]...................[ 1.32500 ]
    CPU Termination [ ]...................[ 1.200 ]
    CPU PLL [ ]...................[ 1.55 ]
    CPU Reference [ ]...................[ Auto ]

    MCH Core [ ]...................[ 1.100 ]
    MCH Reference [ ]...................[ Auto ]
    MCH/DRAM Refernce [ ]...................[ Auto ]
    ICH I/O [ ]...................[ Normal ]
    ICH Core [ ]...................[ 1.100 ]

    DRAM Voltage [ ]...................[ 1.98 ]
    DRAM Termination [ ]...................[ Normal ]
    Last edited by member1234; 07-08-2011 at 07:21 AM.

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Q9650 & GA EP45t ud3lr & 2x2 4 gb1600 mhz cl8 O.C. HELP

    MCH Reference 1.926, please revuew the settings.
    If you have EasyTune installed please post a screen capture of Tuner -> Advanced -> Voltage tab.
    Please fill your forum signature with your system specs, including ram model.
    A text report of CPU-Z may be useful too.

  3. #3
    Join Date
    Jul 2011
    Location
    Turkey
    Posts
    6

    Default Re: Q9650 & GA EP45t ud3lr & 2x2 4 gb1600 mhz cl8 O.C. HELP

    Ohh srry
    MCH Reference 0.926

  4. #4
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Q9650 & GA EP45t ud3lr & 2x2 4 gb1600 mhz cl8 O.C. HELP

    Those 1.65v modules and you are using 1.98v?
    Please attach CPU-Z text report.

  5. #5
    Join Date
    Jul 2011
    Location
    Turkey
    Posts
    6

    Default Re: Q9650 & GA EP45t ud3lr & 2x2 4 gb1600 mhz cl8 O.C. HELP

    1600 MHZ 1.65 volt?
    1800 mhz how much ?

  6. #6
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Q9650 & GA EP45t ud3lr & 2x2 4 gb1600 mhz cl8 O.C. HELP

    No one said the can do 1800MHz. Maybe they canBut pumping voltage so high just put them at risk.
    First you will need to losen timings and other things maybe too.

  7. #7
    Join Date
    Jul 2011
    Location
    Turkey
    Posts
    6

    Default Re: Q9650 & GA EP45t ud3lr & 2x2 4 gb1600 mhz cl8 O.C. HELP

    İ will try after sleeping ^^ im so tired Now i go bed thanks Good nighttt . im so sry for my Bad english :)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •