Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: Q9650 O.C. some help pls




  1. #1
    Join Date
    Jul 2011
    Location
    Turkey
    Posts
    6

    Default Q9650 O.C. some help pls

    Mainboard : GA ep45t udl3r 2200 mhz+
    Cpu : Q 9650 3.0 Ghz
    CPU cooler : Zalman Cnps 10x extreme
    Graphic Card: GTX 260 Amp2
    Ram: Corsair Dominator 1600 mhz cl 8
    Power supply: Xilence 1000 watt
    Case : HAF 932


    [IMG=http://img5.imageshack.us/img5/4366/adszqrq.jpg][/IMG]

    İt's working stable now but how can i reduce the cpu voltage?


    Motherboard Intelligent Tweaker

    Robust Graphics Booster.........................[ Turbo ]
    CPU Clock Ratio.................................[ 9x ]
    Fine CPU Clock Ratio............................[ + 0.0 ]
    CPU Frequency 4.14GHz...........................[ 450x9 ]

    Clock Chip Control

    CPU Host Clock Control..........................[ Enabled ]
    CPU Host Frequency (Mhz)........................[ 450 ]
    PCI Express Frequency (Mhz).....................[ Auto ]
    C.I.A 2.........................................[ Disabled ]

    Advanced Clock Control

    CPU Clock Drive.................................[ 900mv ]
    PCI Express Clock Drive.........................[ 900mv ]
    CPU Clock Skew..................................[ 0ps ]
    MCH Clock Skew..................................[ 50ps ]

    DRAM Performance Control

    Performance Enhance.............................[ Extreme ]
    Extreme Memory Profile(X.M.P.) [ Disabled ]
    (G) MCH Frequency Latch.........................[ 400 ]
    System Memory Multipler.........................[ 2.66D ]
    Memory Frequency 1066...........................[ 1200 ]
    DRAM Timing Selectable..........................[ Manual ]

    CAS Latency Time................................[ 6 ]
    tRCD............................................[ 6 ]
    tRP.............................................[ 6 ]
    tRAS............................................[ 18 ]

    tRRD[4].........................................[ 5 ]
    tWTR[5].........................................[ 5 ]
    tWR[14].........................................[ 9 ]
    tRFC[74]........................................[ 66 ]
    tRTP[5].........................................[ 5 ]
    Command Rate (cmd)[0]...........................[ 1 ]

    Channel A Timing Settings

    Static tRead Value (PL) [ ] ................[ Auto ]

    Channel B Timing Settings

    Static tRead Value (PL) [ ] ................[ Auto ]

    Motherboard Voltage Control

    Load-Line Calibration...........................[ Enabled ]
    CPU Vcore [ ]...................[ 1.38750 ]
    CPU Termination [ ]...................[ 1.320 ]
    CPU PLL [ ]...................[ Auto ]
    CPU Reference [ ]...................[ Auto ]

    MCH Core [ ]...................[ 1.380 ]
    MCH Reference [ ]...................[ Auto ]
    MCH/DRAM Refernce [ ]...................[ Auto ]
    ICH I/O [ ]...................[ Normal ]
    ICH Core [ ]...................[ Normal ]

    DRAM Voltage [ ]...................[ 1.66 ]
    DRAM Termination [ ]...................[ Normal ]
    Channel A Ref [ ]...................[ Normal ]
    Channel B Ref [ ]...................[ Normal ]
    Last edited by member1234; 07-09-2011 at 02:24 AM.

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Q9650 O.C. some help pls

    Why new thread?
    Vcore is OK, what is it in CPU-Z under load?
    Don't leave PLL auto, set manually normal or 1.55.
    Also change DRAM Termination, Channel A Ref, and Channel B Ref, to auto.
    MCH Core very high too, see if you can get it under 1.3v.
    Advanced timings are also best on auto.

  3. #3
    Join Date
    Jul 2011
    Location
    Turkey
    Posts
    6

    Default Re: Q9650 O.C. some help pls

    CPU-Z under load 1.36 V
    Now MCH Core 1.30 V
    Last edited by member1234; 07-10-2011 at 03:54 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •