Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 31

Thread: i5-2500k OC on P67A-UD4-B3 F4 BIO




  1. #21
    Join Date
    Jul 2011
    Location
    New Brunswick
    Posts
    34

    Default Re: i5-2500k OC on P67A-UD4-B3 F4 BIO

    After the "Open driver handle failure" error, this is what says next "error number 0x80040707
    description: dll function call crashed: checkfk.searchBIOSStr "

  2. #22
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: i5-2500k OC on P67A-UD4-B3 F4 BIO

    This during installation or after?

  3. #23
    Join Date
    Jul 2011
    Location
    New Brunswick
    Posts
    34

    Default Re: i5-2500k OC on P67A-UD4-B3 F4 BIO

    during installation and it will terminate the installation.

    Should I run the window 7 CD again and see if anything needs to be repaired?

  4. #24
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: i5-2500k OC on P67A-UD4-B3 F4 BIO

    You can try, won't make no difference if it's related to the graphic card.
    Another thing I've read was about serial/paralel port need to be enabled in BIOS.

  5. #25
    Join Date
    Jul 2011
    Location
    New Brunswick
    Posts
    34

    Default Re: i5-2500k OC on P67A-UD4-B3 F4 BIO

    The onboard serial port 1 was disabled. I will enable it and try again tonight. I don't see the paralel port you were talking about. If that doesn't work, I will check the graphic card, then window 7 repair CD.

    I doubt it is the graphic card as I have HD6950 stock speed which is pretty common, with the latest driver.

  6. #26
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: i5-2500k OC on P67A-UD4-B3 F4 BIO

    Seems they got rid of the paralel port :)

  7. #27
    Join Date
    Jul 2011
    Location
    New Brunswick
    Posts
    34

    Default Re: i5-2500k OC on P67A-UD4-B3 F4 BIO

    Going to try Revouninstaller too just to make sure no leftover from the previous installation.

  8. #28
    Join Date
    Jul 2011
    Location
    New Brunswick
    Posts
    34

    Default Re: i5-2500k OC on P67A-UD4-B3 F4 BIO

    The serial port thing didn't work. I ended up using the CD that came with the motherboard, and was able to install ET6. I am not sure why, but glad it is all set.

  9. #29
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: i5-2500k OC on P67A-UD4-B3 F4 BIO

    Originally we wanted ET6 to confirm applied(target) voltages are OK
    ET6 -> Tuner -> Advanced -> Voltage tab.

  10. #30
    Join Date
    Jul 2011
    Location
    New Brunswick
    Posts
    34

    Default Re: i5-2500k OC on P67A-UD4-B3 F4 BIO

    I changed to 4.5 GH OC with 1.355 vcore and 1.5v Dram. The system runs stable so far with Prime95.

    ET6 shows:

    vtt = 1.120
    SAt = 0.920
    vCore = 1.355
    Dram = 1.5

    Everything else are the same as "power on".
    Last edited by pochen23; 07-14-2011 at 12:52 PM.

Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •