Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: Gigabyte UD9 Posting stuck at 50%, Emergeny!!!




  1. #1
    Join Date
    Jun 2010
    Location
    Phoenix, Arizona, United States
    Posts
    120

    Default Gigabyte UD9 Posting stuck at 50%, Emergeny!!!

    Hello,

    I recently benched my CPU on Prime95 for about 15 hours. This computer I have had working fine for about a year now.

    Passed all tests. My memory is also good. Check my signature for more details.

    Now the problem...


    I wanted to run Memtest 86+ because I haven't in quite some time. I went into my BIOS and changed my boot device to CD-ROM.

    All of sudden my computer would only post to 50 percent on the Motherboard. Meaning the motherboard read out was: 50 on the error code indicator.

    I shut off my computer via holding down the power button. Tried to reboot. Same thing. Cleared CMOS. Same thing. Stuck at the Gigabyte UD9 Splash Screen.


    What do I do now? Would removing the battery from my motherboard help this situation? What the hell is going on!!! My computer was working fine seconds ago, I hope I don't have to RMA the board.

    Title should be changed to Emergency...


    CMOS:

    CPU = Intel i7 980X 32nm
    Motherboard = Gigabyte X58 UD9 Rev 1.0
    BIOS Version = F5h
    CPU Frequency = 4.00ghz
    Memory Frequency = 1600 MHZ
    Total Memory Size = 12288 MB
    System Temp = 45C
    MCH Temp = 57C
    CPU Temp = 40C
    Vcore = 1.44V
    DRAM Voltage = 1.632V
    Ram = 12GB G.Skill Ripjaws 2 Sets of 6 GB (3 x 2 gb)
    Ram Link = Newegg.com - G.SKILL Ripjaws Series 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 2000 (PC3 16000) Desktop Memory Model F3-16000CL9T-6GBRH

    M.I.T Status:

    Turbo Ratio: 24 All Cores
    Non-Turbo Ratio: 24 All Cores
    CPUID: 000206C2

    Power Management Settings:

    ACPI..................................53 (STR)
    Soft Off by PWR Button.......4 Sec Delay
    Power on ring....................On
    HPET Support.....................Enabled
    HPET Mode.........................64-Bit Mode
    AC Back Function................Soft Off
    ErP Support........................Disabled

    Code:

    Advanced CPU Features:
    CPU Clock Ratio ................................ [25X]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Disabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. 5.76ghz
    Uncore Frequency .......................... 3200mhz
    Isonchronous Frequency? Support? ..................[Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................[160]
    PCI Express Frequency (MHz) ........... Auto

    C.I.A.2 [Disabled].........................??? Could not find.

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Profile:
    Profile DDR Voltage...............1.6V
    Profile QPI Voltage.................1.2V
    Channel Interleaving...............6 [AUTO]
    Rank Interleaving...................4 [AUTO]

    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo]
    Extreme Memory Profile (X.M.P) ......... [Enabled - Profile 1]
    System Memory Multiplier (SPD) ........ [10.00]
    DRAM Timing Selectable (SPD) .......... [Quick]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................24

    ##Channel A Advanced Timing Control##
    tRC ........................................47
    tRRD .......................................6
    tWTR ......................................6
    tWR ........................................10
    tWTP .......................................22
    tWL ........................................8
    tRFC .......................................88
    tRTP .......................................6
    tFAW ......................................30
    Command Rate (CMD) ................3

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................58 (On channel C it is at 59)

    B2B CAS Delay ..........................Auto

    Channel A Turn Around Settings:

    Reads: Dimms-6 Ranks-5 On the Same Rank - 1
    Writes: Dimms-6 Ranks-66 On the Same Rank - 1


    Advanced Voltage Control:

    CPU
    Load Line Calibration .................[Standard]
    CPU Vcore ...............................1.44V
    QPI/VTT Voltage.......................1.580V
    CPU PLL...................................AUTO

    MCH/ICH
    PCIE......................................1.500V
    QPI PLL...................................1.100V
    IOH Core..................................1.100V
    ICH I/O...................................1.500V
    ICH Core.................................1.100V

    DRAM
    DRAM Voltage......................1.660V
    DRAM Termination................0.750V
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    Last edited by Gangifilms; 08-10-2011 at 03:59 AM.

  2. #2
    Join Date
    Jun 2010
    Location
    Phoenix, Arizona, United States
    Posts
    120

    Default Re: Gigabyte UD9 Posting stuck at 50%, Emergency

    Bump.

  3. #3
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Gigabyte UD9 Posting stuck at 50%, Emergeny!!!

    Did you set your OS as first boot device and set raid if u were using it after clearing cmos? Tried windows cd start up repair? If that fails try mb battery removal for 30mins,if no good then leave battery out overnight,remember to load optimized defaults and then set up your BIOS settings after you've fully cleared cmos
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  4. #4
    Join Date
    Jun 2010
    Location
    Phoenix, Arizona, United States
    Posts
    120

    Default Re: Gigabyte UD9 Posting stuck at 50%, Emergeny!!!

    Alright Guys, Left the battery out of my computer for about 4 hours. Put it back in and everything seems ok now. I finally got back to my Windows Desktop.

    I couldn't even post. Which means I was stuck at the DEL: Enter BIOS F12: Boot Menu Screen. So windows repair would not work.


    This thread is SOLVED. But still not sure what caused the freeze in the first place....

  5. #5
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Gigabyte UD9 Posting stuck at 50%, Emergeny!!!

    What's your voltages for dram,qpi/vtt? You don't need much qpi with that chip but if on auto it might under/overvolt it,set a manual dram voltage to what's printed on the ram too,I forget the formula for calculating the uncore freq with that chip but I think its 2x mem multi and try taking off 5,for 920/930 chip it would be 2x mem multi plus 1 or plus 2,a fixed amount will be more stable than on auto
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •