Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: P67A-UD5-B3 Voltage Discrepencies!!!




  1. #1
    Join Date
    Aug 2011
    Location
    Canada
    Posts
    2

    Angry P67A-UD5-B3 Voltage Discrepencies!!!

    Hi Tweaktown!

    I have a P67A-UD5-B3 board that I'm using with a i5-2500k. I have managed to overclock it to 4.2Ghz stable with the voltage set in BIOS F5 to 1.345v Thing is in the BIOS screen the voltage reads 1.308 (1.260 load) and same in CPUZ on the desktop. Also I can't seem to read the fan speeds properly on HWMonitor. I also read more voltage for RAM than what is set in the BIOS. Kinda scary when manual settings aren't reflected in desktop HW monitor software AND in the BIOS it's "PC Health Status"!!!

    What ever setting in the BIOS you have for RAM voltage it's +0.02 HIGHER with monitoring software.
    What ever setting in the BIOS you have for CPU voltage it's -0.06 LOWER with monitoring software. This is significant no!!!

    This also includes the PC health status monitoring screens in the BIOS.

    I'm using BIOS F5.
    Last edited by HiroPro; 08-13-2011 at 04:11 PM.

  2. #2
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: P67A-UD5-B3 Voltage Discrepencies!!!

    This is the problem with hardware monitoring software. Not one software is 100% accurate. Even the Bios is not 100%. The only way to tell exactly what voltage is being used is with a Digital Volt Meeter (DVM).

    So you might have better success with software if you using Gigabyte software Easy Tune 6 (ET6) that is designed to work with motherboard. If you use software make sure you are using the most update version along with the bios.

    If you use a DVM you may find that some voltages are actually higher then what is reported by software. Also remember there is marge of error can get greater as voltage is increased.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: P67A-UD5-B3 Voltage Discrepencies!!!

    The Vcore amount under load and at idle can be adjusted in the BIOS by testing an Load Line Calibration level and find one you like. If your board only has 2 still, I suggest using Level 1 as it should be pretty good.

    But as mentioned above, software isn't always accurate, and voltage drops and droops are normal and part of Intel's intended design.

    Easytune will read your fan speeds properly, and so will AIDA64, you can get the latest of either here
    http://forums.tweaktown.com/gigabyte...ity-tools.html

  4. #4
    Join Date
    Aug 2011
    Location
    Canada
    Posts
    2

    Default Re: P67A-UD5-B3 Voltage Discrepencies!!!

    Just as a followup... I've been using my P67A-UD5-B3 for some months now with ZERO issues. I'm using BIOS F5 but am curious about newer BIOSs. Should I update to the newer BIOS? does it offer me anything? I do duel boot linux and like the fact I'm using the older BIOS and not UEFI.

  5. #5
    Join Date
    Feb 2009
    Posts
    51

    Default Re: P67A-UD5-B3 Voltage Discrepencies!!!

    #1:
    Dram being 0.02v higher than default, is deliberate. This was actually a changelog in one of the f4 beta bioses. It was done to improve stability, as some 1.5v Ram would have problems completing POST on some configurations at exactly 1.5v, so the default was raised to 1.52v. I actually encountered that before on f3g, where the board would try to POST, but then fail after 10 seconds and shut off; removing 1 Ram stick stopped that, and setting voltage to 1.52v fixed it as well. Maybe a very slightly flaky stick, sure, but works perfectly, now with 4x4 GB Ram on F7 Bios.

    Your vcore issue happens with *ALL* boards from ALL manufacturers, it's called vdroop and it's deliberate. Loadline calibration is needed to minimize or offset this, and different boards have different ways to offset this. IMO, Gigabyte's multi-step LLC is just piss poor, with erratic vcore swings at higher voltages, (while being very stable and reliable at 1.25v'ish), compared to the old LLC1/LLC2 system, which was fully stable and fully predictable even at 1.50v.

    F7 has 22nm CPU support and some other fixes. Recommended to update, but if it isn't broke, don't fix it.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •