Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: GA-P55-UD5 F11C BIOS - RAM Command Rate changes from 1N To 2N?




  1. #1
    Join Date
    Feb 2010
    Location
    Australia
    Posts
    17

    Default GA-P55-UD5 F11C BIOS - RAM Command Rate changes from 1N To 2N?

    I am wondering if there will be a BIOS update for the GA-P55-UD5 (rev.1) from F11c that will address S3 sleep state.

    I have manually set all my RAM timings in BIOS with the exception of RTL (Round Trip Latency) set to auto.

    So Here is the problem I am getting. After I have set all my timings manually in BIOS and upon entering S3 sleep state
    my memory timing, specifically CR (Command Rate) Changes from 1N to 2N. All other setting seem to stick.

    GA-P55-UD5 F11C BIOS - RAM Command Rate changes from 1N To 2N?-ga-p55-ud5_f11c-jpg

    Additionally, I will receive the pesky "HAL - The platform firmware has corrupted memory across the previous system power transition. Please check for updated firmware for your system." error in the event log.

    Does this mean I can only use the XMP profile and not tweak the memory?

    Any resolution to this would be helpful or comment on OC the RAM to resolve this would be helpful.
    Gigabyte GA-P55-UD5 Mother Board (F11c BIOS)
    Gigabyte GTX 260+ (GV-N26OC-896I, F11 BIOS @ GPU: 669MHz, Mem: 1053MHz, Shader: 1440 MHz)
    Intel Core i5 750 Batch#L932B650 @ 4000MHz (Multi:20 Bus:200MHz QPI:3600MHz)
    G.Skill F3-16000CL9D-4GBRH @ XMP-2000; 9:9:9:27:1T
    Samsung 2253LW @ 1600x1050x60Hz
    Seasonic M12D 850W

  2. #2
    Join Date
    Feb 2010
    Location
    Australia
    Posts
    17

    Default Re: GA-P55-UD5 F11C BIOS - RAM Command Rate changes from 1N To 2N?

    Update: After rechecking BIOS settings i found that i had XMP profile loaded with manually set values. I have now set BCLK to 200MHz. This has not fixed S3.

    before and after:
    GA-P55-UD5 F11C BIOS - RAM Command Rate changes from 1N To 2N?-ga-p55-ud5_f11c_sleep-jpg
    Gigabyte GA-P55-UD5 Mother Board (F11c BIOS)
    Gigabyte GTX 260+ (GV-N26OC-896I, F11 BIOS @ GPU: 669MHz, Mem: 1053MHz, Shader: 1440 MHz)
    Intel Core i5 750 Batch#L932B650 @ 4000MHz (Multi:20 Bus:200MHz QPI:3600MHz)
    G.Skill F3-16000CL9D-4GBRH @ XMP-2000; 9:9:9:27:1T
    Samsung 2253LW @ 1600x1050x60Hz
    Seasonic M12D 850W

  3. #3
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: GA-P55-UD5 F11C BIOS - RAM Command Rate changes from 1N To 2N?

    You need to manually set timings,9.9.9.27-1T

    If your getting cold boot issues its probably not enough voltage,you can raise dram voltage one click more than 1.5v

    What qpi/vtt voltage you using? If auto what's it using? May need 1.25-1.3v with 2000mhz speed
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  4. #4
    Join Date
    Feb 2010
    Location
    Australia
    Posts
    17

    Default Re: GA-P55-UD5 F11C BIOS - RAM Command Rate changes from 1N To 2N?

    Advanced Frequency Settings:
    CPU Clock Ratio 20x

    Advanced Core Features [Press Enter]:

    Intel(R) Turbo Boost Tech................[Disabled]
    CPU Cores Enabled........................[All]
    CPU Enhanced Halt (C1E)..................[Auto] NOTE: [Disabled] Does not allow for Dynamic Vcore Changes Normal usage shows [1. 072V Idle] [1.264V - 1.296V Load: LinX Benchmark or x264 Multi-Thread Encoding]
    C3/C6/C7 State Support...................[Auto]
    CPU Thermal Monitor......................[Auto]
    CPU EIST Function........................[Disabled]
    Bi-Directional PROCHOT...................[Auto]

    QPI Clock Ratio..........................[Auto] x36
    QPI Link Speed........................ 7.2GHz
    Uncore Clock Ratio.................... x16
    Uncore Frequency...................... 3200MHz

    >>>>> Standard Clock Control <<<<<
    Spread Spectrum .........................[Disabled]
    Base Clock (BCLK) Control................[Enabled]
    BCLK Frequency ..........................[200]
    Extreme Memory Profile (X.M.P.)..........[Enabled] NOTE: See Advanced Timing Control for explanation.
    System Memory Multiplier (SPD)...........[Disabled] 10.0
    Memory Frequency (MHz)................2000
    PCI Express Frequency (MHz)..............[Auto]
    C.I.A.2..................................[Disabled]

    >>>>> Advanced Clock Control <<<<<

    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[ 0ps]

    Advanced Memory Settings:

    Extreme Memory Profile (X.M.P.)..........[Enabled] NOTE: See Advanced Timing Control for explanation.
    System Memory Multiplier (SPD)...........[10.0]
    Memory Frequency (MHz)................2000
    Performance Enhance (SPD)............. [Turbo] NOTE: When XMP or Manually set Timings are loaded this makes no difference (Speculative)
    DRAM Timing Selectable (SPD)............ [Expert] Quick NOTE: Using Quick because im lazy
    Profile DDR Voltage .................. 1.5V
    Profile QPI Voltage .................. 1.1V
    Channel Interleaving.....................[Auto]
    Rank Interleaving........................[Auto]

    >>>>> Channel A & B

    Channel A Timing Settings [Press Enter]:
    XMP|Manual
    Cas Latency Time........................ 9 [9]
    tRCD.................................... 9 [9]
    tRP..................................... 9 [9]
    tRAS................................... 27 [27]

    >>>>> Advanced Timing Control
    XMP|Manual
    tRC....................................47 [Auto] 47
    tRRD................................... 6 [Auto] 6
    tWTR................................... 6 [Auto] 6
    tWR....................................10 [Auto] 10
    tWTP...................................21 [Auto] 21
    tWL.................................... 7 [Auto] 7
    tRFC...................................88 [Auto] 88
    tRTP................................... 6 [Auto] 6
    tFAW...................................30 [Auto] 30
    Command Rate (CMD)..................... 2 [1]

    NOTE: Performance Enhance (SPD) NORMAL|TURBO|EXTREME are not used due to XMP profile either set or manually set timings.
    Command Rate is the only modified setting different from XMP profile either set or manually set timings.

    >>>>> Misc Timing Control
    B2B Cas Delay.......................... - [Auto]
    Round Trip Latency.....................[Channel A 50] [Channel B 52] [Auto] NOTE: Odd setting with Different channel timings. Has always been left at [AUTO].

    Channel A Turnaround Settings [Press Enter]:
    Different DIMMs........................ 6 [Auto] Auto
    Different DIMMs........................ 5 [Auto] Auto
    On The Same Rank....................... 1 [Auto] Auto

    >>>>> Channel A Writes Followed By Writes

    Different DIMMs........................ 6 [Auto] Auto
    Different DIMMs........................ 6 [Auto] Auto
    On The Same Rank....................... 1 [Auto] Auto


    Advanced Voltage Settings:

    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------

    >>> CPU
    Load Line Calibration...................[Level 2] Standard
    CPU Vcore..................... 1.16250V [Normal]
    Dynamic Vcore................ +0.00000V [+0.21875V] NOTE: As mentioned before, In conjunction with C1E average Volts [1. 072V Idle] [1.264V - 1.296V Load] [1.324V Peak EXTREME Load]
    QPI/VTT Voltage............. 1.100v.....[1.220v]

    >>> MCH/ICH
    PCH Core....................1.050v......[Auto] Normal
    CPU PLL......................1.800v.....[Auto] Normal
    NOTE: Have seen no ill effect with either [Auto] or [Normal]

    >>> DRAM
    DRAM Voltage..............1.500v.....[1.640V] NOTE: have tried [1.660V] as well both settings seem perfectly stable so I stuck with the lower setting
    DRAM Termination.........0.750v.....[Auto] Normal
    Ch-A Data VRef............0.750v.....[Auto] Normal
    Ch-A Data VRef............0.750v.....[Auto] Normal
    Ch-B Data VRef............0.750v.....[Auto] Normal
    Ch-B Data VRef............0.750v.....[Auto] Normal
    NOTE: Have seen no ill effect with either [Auto] or [Normal]


    Miscellaneous Settings:[/SIZE]

    Isochronous Support....................[Enabled] Enabled
    Virtualisation technology..............[Enabled] Enabled NOTE: Required

    Integrated Peripherals
    Green LAN...............[Disabled] NOTE: Always [Disabled] Because it does not recover from S3 (Reboot Required for NICs to work again)
    USB Storage Detect ....................[Disabled] Enabled NOTE: Required for legacy hardware

    Computer is perfectly stable with these settings, even after S3. However, Command Rate dropping to 2N degrades performance.

    Ambient Temp ~18c
    31c TMin - 67c TMax (5 runs LinX) NOTE: Can survive 30c day and 20 run LinX test.
    Gigabyte GA-P55-UD5 Mother Board (F11c BIOS)
    Gigabyte GTX 260+ (GV-N26OC-896I, F11 BIOS @ GPU: 669MHz, Mem: 1053MHz, Shader: 1440 MHz)
    Intel Core i5 750 Batch#L932B650 @ 4000MHz (Multi:20 Bus:200MHz QPI:3600MHz)
    G.Skill F3-16000CL9D-4GBRH @ XMP-2000; 9:9:9:27:1T
    Samsung 2253LW @ 1600x1050x60Hz
    Seasonic M12D 850W

  5. #5
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: GA-P55-UD5 F11C BIOS - RAM Command Rate changes from 1N To 2N?

    I would test with 1.25-1.32v qpi/vtt voltage,keep dram voltage one click more than 1.5v
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •