Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 16 of 29 FirstFirst ... 6141516171826 ... LastLast
Results 151 to 160 of 284

Thread: ED45-UD3p with 8400 Dual Core overclock help! :)




  1. #151
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: ED45-UD3p with 8400 Dual Core overclock help! :)

    That usually the message you get after a BSOD. If windows is set to reboot automatically that's probably what happened.
    Look at the event viewer for critical events and see if you can find the BSOD code(if there is one).

  2. #152
    Join Date
    Sep 2011
    Location
    CT
    Posts
    135

    Default Re: ED45-UD3p with 8400 Dual Core overclock help! :)

    I was unable to pinpoint the error code, as I couldn't remember the exact time. I'll make sure I check it right away after next time - didn't even know you could do that


    I clicked down to 473 x 9 x 946.
    Memtest #5 (1) pass was successful, as was IBT (2 minutes idle at desktop):

    <img src = http://img708.imageshack.us/img708/2482/ibt2minuteidle.png>

    I can run Long FFT now, unless you want me to switch it back to 4.25 and try to repeat the error?

  3. #153
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: ED45-UD3p with 8400 Dual Core overclock help! :)

    Going up with CPU frequency with no gain in GFlops is meaningless. See if you get more few clicks above.
    Try a going up FSB to find the point it fails.

  4. #154
    Join Date
    Sep 2011
    Location
    CT
    Posts
    135

    Default Re: ED45-UD3p with 8400 Dual Core overclock help! :)

    While I was waiting to hear back I figured I would try to repeat the test. Think I found it:

    Log Name: System
    Source: Microsoft-Windows-WER-SystemErrorReporting
    Date: 9/23/2011 7:41:14 PM
    Event ID: 1001
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: ACORN
    Description:
    The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 (0x0000000000000000, 0xfffffa80068cd038, 0x00000000b2000040, 0x0000000000000800). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 092311-4836-01.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
    <EventID Qualifiers="16384">1001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-23T23:41:14.000000000Z" />
    <EventRecordID>19265</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>ACORN</Computer>
    <Security />
    </System>
    <EventData>
    <Data Name="param1">0x00000124 (0x0000000000000000, 0xfffffa80068cd038, 0x00000000b2000040, 0x0000000000000800)</Data>
    <Data Name="param2">C:\Windows\MEMORY.DMP</Data>
    <Data Name="param3">092311-4836-01</Data>
    </EventData>
    </Event>

  5. #155
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: ED45-UD3p with 8400 Dual Core overclock help! :)

    0x00000124 is VTT/references settings.
    Set VTT up a notch or 2, then we must work the references, but we need less stable settings so memtest86+ will fail, takes too long to boot to windows with each change.

  6. #156
    Join Date
    Sep 2011
    Location
    CT
    Posts
    135

    Default Re: ED45-UD3p with 8400 Dual Core overclock help! :)

    Sounds good, so I'll run 3.25 again and work the references the way you described in previous posts (after trying VVT). Should I leave VVT at 1-2 up while I work the references, or switch it back down if it doesn't help?

  7. #157
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: ED45-UD3p with 8400 Dual Core overclock help! :)

    Leave it up one click, but remember to make the changes when it is set to 1.2 and then set it back to 1.22.

  8. #158
    Join Date
    Sep 2011
    Location
    CT
    Posts
    135

    Default Re: ED45-UD3p with 8400 Dual Core overclock help! :)

    With settings at 473 x 9.0 x 946 (2.00D), I followed the methods in post #140 to adjust references, VTT, and clock skews. Here are my attempts:


    Changed VVT to 1.22:
    Failed IBT - BSOD

    Changed VVT to 1.24:
    Failed IBT - BSOD

    Clicked down VVT to 1.22 for all the remaining tests as per:
    Quote Originally Posted by Chike View Post
    Leave it up one click, but remember to make the changes when it is set to 1.2 and then set it back to 1.22.
    Then, Changed MCH Ref to 0.720:
    Failed IBT - BSOD

    MCH Reference to 0.700
    Failed IBT - BSOD

    MCH Reference to 0.680
    Failed IBT - BSOD

    Then changed MCH Core to 1.240 for the following tests:
    MCH Reference 0.720:
    Failed IBT - BSOD

    MCH Reference 0.74:
    Failed IBT - BSOD

    With MCH Reference at 0.74, I changed CPU Reference (with all references, I did remember to click down VTT first, so they're reported in their adjusted settings).
    CPU Reference 0.772:
    Failed IBT - BSOD

    CPU Reference 0.797:
    Failed IBT - BSOD

    CPU Reference 0.812:
    Failed IBT - BSOD

    Changed MCH Reference to 0.72 and then the following CPU References:
    CPU Reference 0.772:
    Failed IBT - BSOD

    CPU Reference 0.797:
    Failed IBT - BSOD

    CPU Reference 0.812:
    Failed IBT - BSOD

    Changed MCH Reference to 0.700 and then the following CPU References:
    CPU Reference 0.772:
    Failed IBT - BSOD

    CPU Reference 0.797:
    Failed IBT - BSOD

    CPU Reference 0.812:
    Failed IBT - BSOD

    Changed MCH Reference to 0.720 and then the following CPU References:
    CPU Reference 0.772:
    Failed IBT - BSOD

    CPU Reference 0.797:
    Failed IBT - BSOD

    CPU Reference 0.812:
    Failed IBT - BSOD

    Changed MCH Reference to 0.720 as per:
    Quote Originally Posted by Chike View Post
    Then(if still not stable) lower CPU Reference with MCH Reference 0.72(which you skipped last time)
    CPU Reference 0.757:
    Failed IBT - BSOD

    CPU Reference 0.742:
    Failed IBT - BSOD

    CPU Reference 0.727:
    Failed IBT - BSOD

    CPU Reference 0.712:
    Failed IBT - BSOD

    CPU Reference 0.697:
    BSOD at Windows boot

    CPU Reference 0.682:
    Automatic reboot once it got to windows loading


    I'm now working on these instructions:

    Quote Originally Posted by Chike View Post
    If still not stable try higher VTT (1.22, 1.24) repeating MCH Reference test (074, 0.72, 0.70, CPU Reference at auto) then with CPU above and below default.

    I would also try 50-100ps on each of the clock skews(the other on 0) with the most stable(but not nesessaraly stable) settings for each VTT (1.2, 1.22, 1.24)
    So far I've done the following:

    With VVT at 1.240,

    MCH Reference 0.74:
    Failed IBT - BSOD

    MCH Reference 0.72:
    Failed IBT - BSOD

    MCH Reference 0.70:
    Failed IBT - BSOD

    I will continue with CPU above and below default with the higher VVT (1.24) and the difference MCH References. Then I will try the clock skews. I'll check back periodically in case you'd rather try something else based on the data. I was, unfortunately, doing several things at once during these tests so I was unable to record the BSOD screen, and just assumed we were running into the same one every time. That probably wasn't necessarily a good assumption, and I found out how to disable windows automatic reboot so will be able to capture the BSOD code going forward.

  9. #159
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: ED45-UD3p with 8400 Dual Core overclock help! :)

    Try higher vcore also, so you experimenting with clock skews now?

    To disable automatic reboot:
    right click (my) comuter
    click propertires
    click advanced system settings(win 7) / select advanced(xp)
    click startup and recovery :settings"
    uncheck "automaticaly restart"
    click OK
    click OK

    Strange enough, my "automaticaly restart is checked and I still get the BSOD, could be because of the write to dump file?

  10. #160
    Join Date
    Sep 2011
    Location
    CT
    Posts
    135

    Default Re: ED45-UD3p with 8400 Dual Core overclock help! :)

    Quote Originally Posted by Chike View Post
    Try higher vcore also, so you experimenting with clock skews now?

    To disable automatic reboot:
    right click (my) comuter
    click propertires
    click advanced system settings(win 7) / select advanced(xp)
    click startup and recovery :settings"
    uncheck "automaticaly restart"
    click OK
    click OK

    Strange enough, my "automaticaly restart is checked and I still get the BSOD, could be because of the write to dump file?
    Yes, I unchecked to automatically restart, and with VVt 1.24, MCH Ref 0.74 and CPU Ref 0.810 I got a BSOD and took a photo with my iphone:

    0x00000124 was the code. Also Windows provided me details on restart as:
    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.1.7600.2.0.0.768.3
    Locale ID: 1033

    Additional information about the problem:
    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA80068CC038
    BCP3: 00000000B2000040
    BCP4: 0000000000000800
    OS Version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1

    Files that help describe the problem:
    C:\Windows\Minidump\092411-5787-01.dmp
    C:\Users\Jake\AppData\Local\Temp\WER-17456-0.sysdata.xml

    Read our privacy statement online:
    Windows 7 Privacy Statement - Microsoft Windows

    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt



    Right now, I'm trying the previous method but with VVT at 1.24 (first the MCH references, then CPU references while at the various MCH References (0.74, 0.72, 0.70). The previous combinations I tried with references were with VVT at 1.22, so I'm trying this. If you'd rather me try the skews first I can do that too - just let me know which MCH / CPU references to try them at - MCH at 0.74 and VVT 1.22 I would guess?

Page 16 of 29 FirstFirst ... 6141516171826 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •