Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 6 of 8 FirstFirst ... 45678 LastLast
Results 51 to 60 of 74

Thread: STILL trying to get a modest Overlock in my GA-X58A-UD3R rev 2.0




  1. #51
    Join Date
    May 2011
    Location
    Sacramento, CA
    Posts
    60

    Default Re: STILL trying to get a modest Overlock in my GA-X58A-UD3R rev 2.0

    Quote Originally Posted by Acebmxer View Post
    Yes "Power On" is defaults and usually do not change. Only time I have seen them change is if you installed ET6 with manual set voltages but not all the time.

    Sorry I have not read your whole post. I kinda just jumped in, Is this a new build or has this been working fine untill the new set of ram was add? If its a new build or new cpu, you might want to check the cpu socket for any bent pins. If its a old build or cpu has not been touched maybe try to reflash bios.?.? You are on the latest bios correct?

    Try running ram at slower speeds and work your way up to rated speed.

    Have to be carefull with qpi/vtt as "too much" can be as bad as "not enough" so 1.395 qpi/vtt is too much for 1 4gb stick.

    The times it failed are you still getting a BSOD or just worker stopped? I personally prefer to use LinX, run at full mem for 10-15 run 20 max
    old build. haven't touched cpu since built it over 6 months ago. 24gb ram worked fine for 2 weeks, i think it was running at 1066 or 1333

    BIOS has been re-flashed and CMOS reset

    worker stopped. it BSOD's often, sometimes when i run IE9 or just immediately after login

    okay with cpu stock
    vcore 1.325
    dram 1.54v
    qtt 1.215v

    prime95 still failes immediately on same cores

    what settings should i try LinX

    64-bit
    12 threads
    priority class, normal?
    data alignment (KiB), 4?
    Linpack32max problem size, 15500?
    Memory for OS (MiB), 5?

    those are defaults
    and 10-15min or times?

    RAN IT ON DEFAULT JUST NOW excelt clicked ALL memory and 15 TIMES, and BSOD 03b again.
    Last edited by nottinmatterz_2day; 03-02-2012 at 05:51 AM.
    Asus P979X Deluxe with 3930K @ 4.7Ghz 102.2x46
    2133Mhz Ram OC to 2180.4Mhz 4x8GB Ripjaws Z
    51.1GB/s Aggregate Memory Performance in Sandra
    GTX 570 (EVGA) w/2.5GB @ 850Mhz/1700/2100Mhz @ 1.063v

  2. #52
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: STILL trying to get a modest Overlock in my GA-X58A-UD3R rev 2.0

    Dont change any advance setting in LinX just click the button to use all ram next to the drop down menu. Also be sure to use the latest version of LinX with the updated libraries.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  3. #53
    Join Date
    May 2011
    Location
    Sacramento, CA
    Posts
    60

    Default Re: STILL trying to get a modest Overlock in my GA-X58A-UD3R rev 2.0

    Quote Originally Posted by Acebmxer View Post
    Dont change any advance setting in LinX just click the button to use all ram next to the drop down menu. Also be sure to use the latest version of LinX with the updated libraries.
    Loaded Optimized settings and it still fails Prime95 and LinX, see image below

    it errored 2min 40s in now after loading optimized settings in BIOS
    STILL trying to get a modest Overlock in my GA-X58A-UD3R rev 2.0-fail-stats-jpg

    I DID upgrade the GPU MOST recently from GTX 460 to GTX 570 about a week ago. so i was running for 5-6 days with no problems, again only started after I tried to overclock.

    now trying to re-image another drive and its not detecting any HDD in ghost 11 boot from CD
    sometimes it doesn't boot from CD

    not sure if now my power supply is not enough (doubt it)
    but seems most likely my motherboard has major problems
    Last edited by nottinmatterz_2day; 03-02-2012 at 06:34 AM.
    Asus P979X Deluxe with 3930K @ 4.7Ghz 102.2x46
    2133Mhz Ram OC to 2180.4Mhz 4x8GB Ripjaws Z
    51.1GB/s Aggregate Memory Performance in Sandra
    GTX 570 (EVGA) w/2.5GB @ 850Mhz/1700/2100Mhz @ 1.063v

  4. #54
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: STILL trying to get a modest Overlock in my GA-X58A-UD3R rev 2.0

    its because of 24gb of ram imo,try testing with just 12gb and you will see that prime95 ect will last longer before it crashes

    might need 1.35+ qpi/vtt with 24gb ive never tested that much only 12gb and at stock cpu clocks i needed 1.3750v qpi
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  5. #55
    Join Date
    May 2011
    Location
    Sacramento, CA
    Posts
    60

    Default Re: STILL trying to get a modest Overlock in my GA-X58A-UD3R rev 2.0

    Quote Originally Posted by wazza300 View Post
    its because of 24gb of ram imo,try testing with just 12gb and you will see that prime95 ect will last longer before it crashes

    might need 1.35+ qpi/vtt with 24gb ive never tested that much only 12gb and at stock cpu clocks i needed 1.3750v qpi
    I'm still running and testing with just 4GB, and this board is supposed to be able to handle 24gb

    i had tried 1.39vti with 24gb ram

    stock is now unstable and sometimes not even displaying after boot now it's horrible
    Asus P979X Deluxe with 3930K @ 4.7Ghz 102.2x46
    2133Mhz Ram OC to 2180.4Mhz 4x8GB Ripjaws Z
    51.1GB/s Aggregate Memory Performance in Sandra
    GTX 570 (EVGA) w/2.5GB @ 850Mhz/1700/2100Mhz @ 1.063v

  6. #56
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: STILL trying to get a modest Overlock in my GA-X58A-UD3R rev 2.0

    Quote Originally Posted by nottinmatterz_2day View Post
    I'm still running and testing with just 4GB, and this board is supposed to be able to handle 24gb

    i had tried 1.39vti with 24gb ram

    stock is now unstable and sometimes not even displaying after boot now it's horrible
    ohh i didnt realize,yeah then somethings wrong,if i were you id take out mb battery leave out atleast an hour,then put in load optimized defaults and start over with your oc settings,something could have corrupted somewhere in the cmos ect
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  7. #57
    Join Date
    May 2011
    Location
    Sacramento, CA
    Posts
    60

    Default Re: STILL trying to get a modest Overlock in my GA-X58A-UD3R rev 2.0

    Quote Originally Posted by wazza300 View Post
    ohh i didnt realize,yeah then somethings wrong,if i were you id take out mb battery leave out atleast an hour,then put in load optimized defaults and start over with your oc settings,something could have corrupted somewhere in the cmos ect
    are you sure the clear cmos button on back, and load optimized defaults from bios is not sufficient?

    i'll do it anyway. after my re-image is done on another hard drivec
    Last edited by nottinmatterz_2day; 03-02-2012 at 07:05 AM.
    Asus P979X Deluxe with 3930K @ 4.7Ghz 102.2x46
    2133Mhz Ram OC to 2180.4Mhz 4x8GB Ripjaws Z
    51.1GB/s Aggregate Memory Performance in Sandra
    GTX 570 (EVGA) w/2.5GB @ 850Mhz/1700/2100Mhz @ 1.063v

  8. #58
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: STILL trying to get a modest Overlock in my GA-X58A-UD3R rev 2.0

    Reflashing the bios should do the same thing. Try reflashing first if not then try a extented clear.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  9. #59
    Join Date
    May 2011
    Location
    Sacramento, CA
    Posts
    60

    Default Re: STILL trying to get a modest Overlock in my GA-X58A-UD3R rev 2.0

    turned PSU switch off, unplugged, removed CMOS battery for one hour, tested voltage ~2.6v on the battery. put back in, plugged in and flipped psu switch

    rebooted to freshly imaged ssd, different ssd than before.
    loaded optimized settings, then changed back to raid mode so could read my raid drives.

    started up whereas before removing cmos battery it gave disk boot failure.
    still only 4gb ram.

    prime95 still errors on CPU #4
    was going to run LinX but stopped it
    opened IE8 and BOSD luafv 03b error AGAIN.

    rebooted, ran LinX without doing anything else. all ram, BSOD 01e error this time

    Anyone want to buy an x58 board?

    I put in a ticket with GIGABYTE
    Last edited by nottinmatterz_2day; 03-02-2012 at 10:04 AM.
    Asus P979X Deluxe with 3930K @ 4.7Ghz 102.2x46
    2133Mhz Ram OC to 2180.4Mhz 4x8GB Ripjaws Z
    51.1GB/s Aggregate Memory Performance in Sandra
    GTX 570 (EVGA) w/2.5GB @ 850Mhz/1700/2100Mhz @ 1.063v

  10. #60
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: STILL trying to get a modest Overlock in my GA-X58A-UD3R rev 2.0

    i agree somethings not right,at stock it should run sweet as a nut imo,if not then rma it
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

Page 6 of 8 FirstFirst ... 45678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •