Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 12 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 120

Thread: Little help




  1. #31
    Join Date
    Oct 2008
    Location
    CA
    Posts
    215

    Default Re: Little help

    I used LSMD settings in template in this thread, it worked great, no problems at all, now all of sudden i cant change the fsb. Its reading my cpu as a 1066 fsb cpu, its a 1333 fsb, so it dont matter what i change the fsb setting to, it resorts back to 266 fsb.

    If i set fsb to 500 x8, it will load and reset it to 266 in cpuz, if i set it to 200fsb, it will show 266 in cpuz. I will post the settings that were working perfectly fine until today. I know cpuz is reading it right, cuz when i run super pi im getting like 24 sec on 1m, with my settings there were working yesterday im getting 15.876.
    Last edited by califmike2003; 03-17-2012 at 01:24 AM.
    Gigabyte P45 UD3P rev 1.0
    2X2gb Gskill 9600 DDR 2 1200 CL5
    Core 2 Duo E8400
    2 WD 160gb Raptor HD Raid 0
    ATI Radeon HD 6850 1gb

  2. #32
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Little help

    Try clearing CMOS, battery out and CLR_CMOS pins shorted for 30 minutes.
    Turn the PSU off and discharge the capacitores by pressing power button before you do.
    I doubt the board can do 500MHz FSB.

    BTW what CPU cooler do you have? add it to your signature.

  3. #33
    Join Date
    Oct 2008
    Location
    CA
    Posts
    215

    Default Re: Little help

    Ok i will try that. When i first put the cpu in this board, it said 333 x 8, which is 2.66 mgz, so it read the cpu correctly, then i overclocked it and it ran fine and showed the settings correctly. Now its reading the cpu as a 266 x6, and it dont matter what i set in bios it goes right back to 266x 6 or x8. I did try clearing cmos before to no avail, but i will try again, this is why i dont like buying used boards and cpu.
    Gigabyte P45 UD3P rev 1.0
    2X2gb Gskill 9600 DDR 2 1200 CL5
    Core 2 Duo E8400
    2 WD 160gb Raptor HD Raid 0
    ATI Radeon HD 6850 1gb

  4. #34
    Join Date
    Oct 2008
    Location
    CA
    Posts
    215

    Default Re: Little help

    That fixed it, took battery out and cleared cmos, now its reading 333x8, so what was wrong ?
    Gigabyte P45 UD3P rev 1.0
    2X2gb Gskill 9600 DDR 2 1200 CL5
    Core 2 Duo E8400
    2 WD 160gb Raptor HD Raid 0
    ATI Radeon HD 6850 1gb

  5. #35
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Little help

    It happens sometimes mostely with P35 boards and older, most of the times clearing CMOS fix it.

  6. #36
    Join Date
    Oct 2008
    Location
    CA
    Posts
    215

    Default Re: Little help

    New problem now, now my screen is all bluish purple, ever since it bios is fixed now i have this bluish tint on my screen, something with the video card ??????? cant get it to go away.
    Gigabyte P45 UD3P rev 1.0
    2X2gb Gskill 9600 DDR 2 1200 CL5
    Core 2 Duo E8400
    2 WD 160gb Raptor HD Raid 0
    ATI Radeon HD 6850 1gb

  7. #37
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Little help

    Maybe it moved when you cleared CMOS? make sure it is secured in it's slot.
    Maybe longer clear of CMOS.

  8. #38
    Join Date
    Oct 2008
    Location
    CA
    Posts
    215

    Default Re: Little help

    I reseated it and it still is blue, i then took out battery and cleared cmos again, now all is good, thanks for your help Chike. From what i have read this board will do 500fsb, and about 475 stable, thanks again.
    Gigabyte P45 UD3P rev 1.0
    2X2gb Gskill 9600 DDR 2 1200 CL5
    Core 2 Duo E8400
    2 WD 160gb Raptor HD Raid 0
    ATI Radeon HD 6850 1gb

  9. #39
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  10. #40
    Join Date
    Oct 2008
    Location
    CA
    Posts
    215

    Default Re: Little help

    Yeah i have no idea what in the world caused it, but when i took the battery out and cleard cmos, it went away . Im getting some ocz ddr2 8000, cas 4, which should let me try some other memory straps, and see how far this board will go.
    Gigabyte P45 UD3P rev 1.0
    2X2gb Gskill 9600 DDR 2 1200 CL5
    Core 2 Duo E8400
    2 WD 160gb Raptor HD Raid 0
    ATI Radeon HD 6850 1gb

Page 4 of 12 FirstFirst ... 23456 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •