Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 381 of 472 FirstFirst ... 281331371379380381382383391431 ... LastLast
Results 3,801 to 3,810 of 4714

Thread: GIGABYTE Modified Bios




  1. #3801
    Join Date
    Jun 2013
    Location
    Italy
    Posts
    116

    Default Re: GIGABYTE Modified Bios

    Quote Originally Posted by destructionj View Post
    installed and testing now. thank you

    Update : Bios Update seems very stable thank you to all involved. test results attached
    View Picture (1280 x 720 pixels) @PicResize.com

    3770k@4.5 GHz load for 30 min, 16Gb Gskill Trident x 2400.
    pic shows 1.6 because I use EIST in the bios.
    Just a quick clock so I see its a bit hot but I can tweek with that as I see its very stable.
    Hello destructionj, BIOS is the latest F12J beta with modded OROMs and updated CPU micro-code (in this case Rev. 1B for Ivy Bridge) that could possibly change something about the stability for an overclocked CPU...
    Have you noticed some benefit with Rev. 1B of Ivy Bridge CPU micro-code?
    I ask you because after some extensive tests i've rolled back to the Rev. 19 as 1B needed a little bump in VCore to maintain the stability level obtained with the same HW, same F12J modded BIOS and of course Rev. 19 of CPU micro-code.

    Thanks and have a nice day.

    Cheers,

    KK

  2. #3802
    destructionj is offline Junior Member
    Join Date
    Aug 2014
    Location
    USA
    Posts
    3

    Default Re: GIGABYTE Modified Bios

    Quote Originally Posted by killkernel View Post
    Hello destructionj, BIOS is the latest F12J beta with modded OROMs and updated CPU micro-code (in this case Rev. 1B for Ivy Bridge) that could possibly change something about the stability for an overclocked CPU...
    Have you noticed some benefit with Rev. 1B of Ivy Bridge CPU micro-code?
    I ask you because after some extensive tests i've rolled back to the Rev. 19 as 1B needed a little bump in VCore to maintain the stability level obtained with the same HW, same F12J modded BIOS and of course Rev. 19 of CPU micro-code.

    Thanks and have a nice day.

    Cheers,

    KK
    Rev. 1B of Ivy Bridge CPU micro-code seems ok so far. Iím not using Dynamic Vcore and set CPU Vcore to 1.35,(I will start backing down in the next few days but rock solid for now) I enable pll overvolt, PWM Phase Control to eXm Perf, Vcore Response Fast, Vcore LLC Extreme, and I disable thermal monitor. I was running 1.345v on the 19 micro code but im only on an old style corsair H70 push pull, so im willing to accept low 90ís on a 30 mim load test. I can say that the F12 bios listed on the gigabyte site was complete garbage and found setting to be very unstable even in a non-overclocked and stock configuration(but I didnít spend much time as to why). The way I see it, even if I do need 1.35 to run 4.5 solid, Iíll just get a h110 and call it a day. I do seem to have problems getting trimcheck to give WORKING results but havenít tested enough yet. Trimcheck .06 was working on occasion with 2030 raid but I have to run ATTO to get it to respond with positive results. Such is not the case and i haven't seen a WORKING trim result yet on the mod10 bios. I might try to recreate the raid array on my 2 ForceGt Sandforce drives in hopes that ill get better trim results but im not holding my breath.

    UPDATE: I redid the raid array and trim seems to be working.
    View Picture (1920 x 1080 pixels) @PicResize.com
    Last edited by destructionj; 08-05-2014 at 08:24 AM. Reason: Update

  3. #3803
    Join Date
    Jun 2013
    Location
    Italy
    Posts
    116

    Default Re: GIGABYTE Modified Bios

    Quote Originally Posted by destructionj View Post
    Rev. 1B of Ivy Bridge CPU micro-code seems ok so far. Iím not using Dynamic Vcore and set CPU Vcore to 1.35,(I will start backing down in the next few days but rock solid for now) I enable pll overvolt, PWM Phase Control to eXm Perf, Vcore Response Fast, Vcore LLC Extreme, and I disable thermal monitor. I was running 1.345v on the 19 micro code but im only on an old style corsair H70 push pull, so im willing to accept low 90ís on a 30 mim load test. I can say that the F12 bios listed on the gigabyte site was complete garbage and found setting to be very unstable even in a non-overclocked and stock configuration(but I didnít spend much time as to why). The way I see it, even if I do need 1.35 to run 4.5 solid, Iíll just get a h110 and call it a day. I do seem to have problems getting trimcheck to give WORKING results but havenít tested enough yet. Trimcheck .06 was working on occasion with 2030 raid but I have to run ATTO to get it to respond with positive results. Such is not the case and i haven't seen a WORKING trim result yet on the mod10 bios. I might try to recreate the raid array on my 2 ForceGt Sandforce drives in hopes that ill get better trim results but im not holding my breath.
    Thanks a lot destructionj for these useful informations.

    Cheers,

    KK

  4. #3804
    Ghostearth is offline Member
    Join Date
    Jun 2013
    Location
    France
    Posts
    102

    Default Re: GIGABYTE Modified Bios

    Modified F20 BIOS for X79-UD3 :

    X79-UD3 Sandy Brigde-E : X79-UD3 SANDY
    X79-UD3 Ivy Bridge-E : X79-UD3 IVY MOD

    Updated with : (thanks stasio for the base bios's)

    Intel RAID for SATA 13.1.0.2030 to 13.1.0.2126 (better benchmark than 13.2.0.2134 and designed for X99 chipset)
    Intel UEFI SataDriver 13.1.02030 to 13.1.0.2126 (better benchmark than 13.2.0.2134 and designed for X99 chipset)
    Intel RSTe RAID for SATA 3.8.0.1029 to 4.0.0.1016
    Intel RSTe EFI SataDriver 3.8.0.1029 to 4.0.0.1016
    Orom Marvell 88SE9192 1.0.1.0025 to 1.0.0.0034
    EFI Marvell SATA RAID to 1.1.0.1007
    Intel Boot Agent GE 1.5.50 to 1.5.56
    Intel UNDI EFI 6.1.16 to 6.3.27
    Latest Intel Microcodes
    ME Firmware 8.1.40.1416
    *Upgrade ME firmware yourself to 8.1.52.1496
    Modified splash logo 2

    Info :Tested the Sandy Bridge-E with sucess on my mobo without issue
    Note :AT YOUR OWN RISK!!!

    PS: If you're already upgraded the Gbe lan firmware from 1.3 to 1.5, please use @bios or q-flash for upgrade, otherwise if you use intel fpt command the Gbe will remain to 1.3.

    Ghostearth.
    Last edited by Ghostearth; 08-08-2014 at 10:44 AM.

  5. #3805
    Join Date
    Jul 2013
    Location
    Switzerland
    Posts
    127

    Default Re: GIGABYTE Modified Bios

    Quote Originally Posted by Ghostearth View Post
    Modified F20 BIOS for X79-UD3 :

    X79-UD3 Sandy Brigde-E : X79-UD3 SANDY
    X79-UD3 Ivy Bridge-E : X79-UD3 IVY MOD

    Updated with : (thanks stasio for the base bios's)

    Intel RAID for SATA 13.1.0.2030 to 13.1.0.2126 (better benchmark than 13.2.0.2134 and designed for X99 chipset)
    Intel UEFI SataDriver 13.1.02030 to 13.1.0.2126 (better benchmark than 13.2.0.2134 and designed for X99 chipset)
    Intel RSTe RAID for SATA 3.8.0.1029 to 4.0.0.1016
    Intel RSTe EFI SataDriver 3.8.0.1029 to 4.0.0.1016
    Orom Marvell 88SE9192 1.0.1.0025 to 1.0.0.0034
    EFI Marvell SATA RAID to 1.1.0.1007
    Intel Boot Agent GE 1.5.50 to 1.5.56
    Intel UNDI EFI 6.1.16 to 6.3.27
    Latest Intel Microcodes
    ME Firmware 8.1.40.1416
    *Upgrade ME firmware yourself to 8.1..52.1496
    Modified splash logo 2

    Info :Tested the Sandy Bridge-E with sucess on my mobo without issue
    Note :AT YOUR OWN RISK!!!

    PS: If you're already upgraded the Gbe lan firmware from 1.3 to 1.5, please use @bios or q-flash for upgrade, otherwise if you use intel fpt command the Gbe will remain to 1.3.

    Ghostearth.

    Thank you ghost, tu es un artiste!

  6. #3806
    Ghostearth is offline Member
    Join Date
    Jun 2013
    Location
    France
    Posts
    102

    Default Re: GIGABYTE Modified Bios

    @Mseirco

    Your are very welcome man

    Ghostearth.

  7. #3807
    Join Date
    Jun 2014
    Location
    italy
    Posts
    8

    Default Re: GIGABYTE Modified Bios

    Quote Originally Posted by Ghostearth View Post
    Modified F20 BIOS for X79-UD3 :

    X79-UD3 Sandy Brigde-E : X79-UD3 SANDY
    Thank you!!

  8. #3808
    Ghostearth is offline Member
    Join Date
    Jun 2013
    Location
    France
    Posts
    102

    Default Re: GIGABYTE Modified Bios

    @puket

    You're welcome

    Ghostearth.

  9. #3809
    Gbmaryland is offline Junior Member
    Join Date
    Apr 2013
    Location
    MD
    Posts
    38

    Default Re: GIGABYTE Modified Bios

    Hey all,

    Was there any reason to update the G1.Assassin2 from F12y mod 5 to F13c (modified)?

    I don't see a whole lot about the F13 bioses for the Assiassin2 x79 MB... and I'm curious if there was anything fixed, or if F12y Mod 5 was about as good as it got.

  10. #3810
    Join Date
    Jul 2013
    Location
    Switzerland
    Posts
    127

    Default Re: GIGABYTE Modified Bios

    Flashed whit q-flash like every time and the famous GBE still in 1.5. Thank to you Ghost.

Thread Information

Users Browsing this Thread

There are currently 60 users browsing this thread. (0 members and 60 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •