Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: Motherboard GA-P67A-UD4-B3 front USB port connector.




  1. #1
    Join Date
    Apr 2012
    Location
    Illinois
    Posts
    2

    Default Motherboard GA-P67A-UD4-B3 front USB port connector.

    Hi, i have front a USB port connector that i haven't figured out where to put them in. It looks like this Motherboard GA-P67A-UD4-B3 front USB port connector.-front-jpg (like the one in the middle).

    I'm not sure if i need some kind of adapter. Here's a picture of the board i have for reference.

    http://www.cfd.co.jp/gigabyte/mother...67a-ud4-b3.jpg

  2. #2
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: Motherboard GA-P67A-UD4-B3 front USB port connector.






    See page 28 in your manual
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Motherboard GA-P67A-UD4-B3 front USB port connector.

    Stack the two on the right shown in the image, the connect to any front panel USB 2.0 header making sure you haev them stacked correctly so the wires match up with the below diagram

    It's just a split header is all, same as using a 10 pin one. One on top, one on bottom, with the Red or Vcc wire for each being on the outside-right, ground inside left (on the no pin side)



    9. No Pin
    10. NC = no connected/no cable (Or you can connect an additional ground there if you like, from either header or both spliced together, but it's not required)

  4. #4
    Join Date
    Apr 2012
    Location
    Illinois
    Posts
    2

    Default Re: Motherboard GA-P67A-UD4-B3 front USB port connector.

    Thanks guys, i didn't realize VCC meant power & when i first installed the board i looked at the diagram wrong on page 28. I thought i needed a special connector or replace the front USB ports for that.

    They work great now, thanks again!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •