Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: Z68XP-UD3 questions & OC remarks




  1. #21
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Z68XP-UD3 questions & OC remarks

    I would think just the oposite since SB clock overclocking is very limited.

  2. #22
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: Z68XP-UD3 questions & OC remarks

    Quote Originally Posted by Darkje View Post
    yeah old school oc demands it's disabled... but I'm not sure nowdays... seems like the few khz it varies the base frequency to prevent emi does not matter as much as it did then...

    but like I said, I've not tested it, so maybe it will gain me a multi ;) maybe it won't...
    From my testing with x58 it has not made any difference that I could tell.

    Also @bookdocks the only other option you might find after pressing Ctrl+F1 is enable wake from usb under power management which should be on by default.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  3. #23
    Join Date
    Jun 2010
    Location
    NL
    Posts
    229

    Default Re: Z68XP-UD3 questions & OC remarks

    Yes gaining a whole multi was ofcourse just kidding.
    It used to be that you disabled it to get frequency as steady as possible, because every mhz counted so much and everything was tight, you could be pushed over the edge by the changes.

    Nowdays with the sandy's it's all a bit different, not as sensitive to freq. changes as I remember the old p4's to be and clocking is also different.
    But maybe if you attempt bclk oc it could be of help? then 1-2 more mhz can add up quite nice...
    - Z68X-UD3H-B3(rev 1.3), bios F12
    - I5-2500k [3148C059], cooled by scythe mugen2 rev.b with 1500rpm pwm-fan on cpufan header.
    - 8G(2x4G) Corsair Vengeance LP CML8GX3M2A1600C9W,Low profile/Low voltage, DDR1600/C9-1.35v. Slots 1&2.
    - 16G(4x4G) Samsung M378B5273DH0-CH9 1333 @ 2133-c11. w1.55v

    - Seasonic M12D SS850-EM , 850W Semi-Modular PSU with 80A at 12V.
    - 2x EVGA GeForce GTX285-1GB in SLi, 4x 6pin power and bridge connected.[PCIEX_16 and PCIEX_8]
    - Hauppauge HVR2200 PCIE 1x tv-tuner card.[PCIEX1_3]
    - Intel controller in raid mode.
    - 2x WD 500G blacks in raid0 on intel port 0-1.
    - 1x WD 1000G black on intel port 2.
    - 1x OCZ Vertex2 (32nm) on intel port 3.
    - 1x Optiarc DVDRW on intel port 4.
    - 1x Samsung 500G on marvell port 0.
    - 24" LCD monitor @ Geforce 0, lower HDMI port.
    - 17" LCD monitor @ Geforce 0, upper HDMI port.
    - 19" LCD tv @ intel/onboard HDMI.
    - 4ch analoge speakers, cambridge dtt set.
    - internal spdif header connected to Geforce 0.
    - front usb connected.
    - front ac97 connected.
    - front cardreader (usb) connected.
    - rear 4x usb bracket.
    - ms media keyboard, ms comfort mouse. usb, wired.
    - w7x64-sp1.



  4. #24
    boondocks's Avatar
    boondocks is offline Senior Member
    Join Date
    Apr 2011
    Location
    Live Oak, Florida
    Posts
    1,652

    Default Re: Z68XP-UD3 questions & OC remarks

    Quote Originally Posted by Acebmxer View Post
    From my testing with x58 it has not made any difference that I could tell.

    Also @bookdocks the only other option you might find after pressing Ctrl+F1 is enable wake from usb under power management which should be on by default.
    Yeah,dunno. Got the cpu in the Z77 right now, Windows is installing. I don't know if I need to change anything else right now, maybe try to get the vcore down some if possible but I'll revisit that when I get the new cpu and get the SB back in the Z68.
    Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
    Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
    PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
    Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
    Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

    Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
    HTPC: Z68 Pro3 M / 2105

    SOLD:Z97X-UD5H /4790K/F11b mod BIOS/4.8@1.38 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
    SOLD:Z87X-UD5H /4770K


Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •