Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 5 of 6 FirstFirst ... 3456 LastLast
Results 41 to 50 of 51

Thread: Bent Pins on X58A-UD5... How did they get bent? Never removed the CPU since install over 2yrs ago.




  1. #41
    Join Date
    Dec 2010
    Location
    Near Toronto but not in it
    Posts
    624

    Default Re: Bent Pins on X58A-UD5... How did they get bent? Never removed the CPU since install over 2yrs ago.

    all I got is an old crappy point and shot that doesn't have a micro mode and I have shaky hands so that is the best I'm going to get. lol

    Vin
    Main Rig
    OS = Win8.1
    CPU = i7-980X @ 4.17Ghz 144x29 cooled by custom Loop
    Mem = 12GB 2000Mhz corsair Dominator GT at 2010Mhz @ 9-10-9-27-2T
    MB = Gigabyte GA-X58A-UD5 v1.0 with F6 Bios - Dead Board
    MB = EVGA X58 Classified3 e770
    GPU = 2x Sapphire r9 290x in xfire
    HD = 2x Toshiba 120GB Raid 0 (580MB Read/140MB Write)
    Storage = 2TB WD Black
    PSU = EVGA SuperNOVA 1300w
    Case = Cooler Master HAF-X 945

    HTPC / Home Server
    OS = Win7 64Bit running XBMC HTPC Front end with Windows Server 2011 Virtual Machine with 8GB ram assigned for homer server with exchange
    CPU = AMD 1090T
    Mem = 16GB 1600Mhz Kingston RED Limited Edition running at 1600Mhz
    MB = Gigabyte 790FXTA-UD5
    GPU- EVGA GT210
    HD = too many to count, but about 5TB of storage all together including backup
    PSU = Corsair TX750
    Case = Too embarrassed to mention.

  2. #42
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Bent Pins on X58A-UD5... How did they get bent? Never removed the CPU since install over 2yrs ago.

    Do you have a friend who has a mid-level point and shoot camera with macro mode?
    A 5 megapixel camera is sufficient.
    Does your friend have steady hands or a tripod? ;)

  3. #43
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Bent Pins on X58A-UD5... How did they get bent? Never removed the CPU since install over 2yrs ago.

    if they are burnt chances are they arnt touching the cpu pad enough and arcing,you could be very carefull and lift them up slightly so they touch better but burnt pins like those shouldnt be an issue,the z68 board im using has alot of burnt pins and one pin missing completely yet it runs without issue
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  4. #44
    Join Date
    Dec 2010
    Location
    Near Toronto but not in it
    Posts
    624

    Default Re: Bent Pins on X58A-UD5... How did they get bent? Never removed the CPU since install over 2yrs ago.

    I couldn't run it... HD access was shotty, drives were dropping out for no reason.... read access was 50k/sec at times while copying files... Temps were 20+ degree more than the board I am using now 12-15 degrees more at just idle... I'm not risking my CPU to make this POS work. it's either RMA or the dumpster.

    Vin
    Main Rig
    OS = Win8.1
    CPU = i7-980X @ 4.17Ghz 144x29 cooled by custom Loop
    Mem = 12GB 2000Mhz corsair Dominator GT at 2010Mhz @ 9-10-9-27-2T
    MB = Gigabyte GA-X58A-UD5 v1.0 with F6 Bios - Dead Board
    MB = EVGA X58 Classified3 e770
    GPU = 2x Sapphire r9 290x in xfire
    HD = 2x Toshiba 120GB Raid 0 (580MB Read/140MB Write)
    Storage = 2TB WD Black
    PSU = EVGA SuperNOVA 1300w
    Case = Cooler Master HAF-X 945

    HTPC / Home Server
    OS = Win7 64Bit running XBMC HTPC Front end with Windows Server 2011 Virtual Machine with 8GB ram assigned for homer server with exchange
    CPU = AMD 1090T
    Mem = 16GB 1600Mhz Kingston RED Limited Edition running at 1600Mhz
    MB = Gigabyte 790FXTA-UD5
    GPU- EVGA GT210
    HD = too many to count, but about 5TB of storage all together including backup
    PSU = Corsair TX750
    Case = Too embarrassed to mention.

  5. #45
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Bent Pins on X58A-UD5... How did they get bent? Never removed the CPU since install over 2yrs ago.

    You can RMA the board and sell it when it comes back, keep it as a spare or use it as a high tech paper weight.
    Your cost will be limited to shipping the mobo one way.

  6. #46
    Join Date
    Dec 2010
    Location
    Near Toronto but not in it
    Posts
    624

    Default Re: Bent Pins on X58A-UD5... How did they get bent? Never removed the CPU since install over 2yrs ago.

    That's what I'll be doing, RMA and sell it off... I don't need 2 x58 boards right now...

    thanks for all the help in this issue guys. I really appreciated it.

    Vin
    Main Rig
    OS = Win8.1
    CPU = i7-980X @ 4.17Ghz 144x29 cooled by custom Loop
    Mem = 12GB 2000Mhz corsair Dominator GT at 2010Mhz @ 9-10-9-27-2T
    MB = Gigabyte GA-X58A-UD5 v1.0 with F6 Bios - Dead Board
    MB = EVGA X58 Classified3 e770
    GPU = 2x Sapphire r9 290x in xfire
    HD = 2x Toshiba 120GB Raid 0 (580MB Read/140MB Write)
    Storage = 2TB WD Black
    PSU = EVGA SuperNOVA 1300w
    Case = Cooler Master HAF-X 945

    HTPC / Home Server
    OS = Win7 64Bit running XBMC HTPC Front end with Windows Server 2011 Virtual Machine with 8GB ram assigned for homer server with exchange
    CPU = AMD 1090T
    Mem = 16GB 1600Mhz Kingston RED Limited Edition running at 1600Mhz
    MB = Gigabyte 790FXTA-UD5
    GPU- EVGA GT210
    HD = too many to count, but about 5TB of storage all together including backup
    PSU = Corsair TX750
    Case = Too embarrassed to mention.

  7. #47
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Bent Pins on X58A-UD5... How did they get bent? Never removed the CPU since install over 2yrs ago.

    You're welcome, glad to help out.
    May your new EVGA mobo live longer and prosper more than your Gigabyte board.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  8. #48
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Bent Pins on X58A-UD5... How did they get bent? Never removed the CPU since install over 2yrs ago.

    Quote Originally Posted by profJim View Post
    You're welcome, glad to help out.
    May your new EVGA mobo live longer and prosper more than your Gigabyte board.
    Yeah congrats and remind me to not to purchase a used x58a board from newegg.... or I might just wind up with your problem....LOL
    Last edited by Conners; 11-12-2012 at 09:39 AM.

  9. #49
    Join Date
    Dec 2010
    Location
    Near Toronto but not in it
    Posts
    624

    Default Re: Bent Pins on X58A-UD5... How did they get bent? Never removed the CPU since install over 2yrs ago.

    Got my Board back from Gigabyte RMA department. They were unable to reproduce the issues I was having. :(

    They ran their in-house testing and was also able to run PassMark Stability Test without issues for 10 Hours. They also had no issues installing Windows 7-64Bit and experienced no BSOD.

    If they couldn't reproduce it, I can't blame them for not doing anything with the board.

    But knowing what this board was doing I can't sell it, even with Gigabytes OK. I wouldn't feel right...

    So what should I do? I see W3520's and W3530's on ebay for $100? But I don't need another PC... I already have 5 PC's... and this board can't bench, I could barely run it at stock?

    No clue what to do with it....

    Vin
    Main Rig
    OS = Win8.1
    CPU = i7-980X @ 4.17Ghz 144x29 cooled by custom Loop
    Mem = 12GB 2000Mhz corsair Dominator GT at 2010Mhz @ 9-10-9-27-2T
    MB = Gigabyte GA-X58A-UD5 v1.0 with F6 Bios - Dead Board
    MB = EVGA X58 Classified3 e770
    GPU = 2x Sapphire r9 290x in xfire
    HD = 2x Toshiba 120GB Raid 0 (580MB Read/140MB Write)
    Storage = 2TB WD Black
    PSU = EVGA SuperNOVA 1300w
    Case = Cooler Master HAF-X 945

    HTPC / Home Server
    OS = Win7 64Bit running XBMC HTPC Front end with Windows Server 2011 Virtual Machine with 8GB ram assigned for homer server with exchange
    CPU = AMD 1090T
    Mem = 16GB 1600Mhz Kingston RED Limited Edition running at 1600Mhz
    MB = Gigabyte 790FXTA-UD5
    GPU- EVGA GT210
    HD = too many to count, but about 5TB of storage all together including backup
    PSU = Corsair TX750
    Case = Too embarrassed to mention.

  10. #50
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Bent Pins on X58A-UD5... How did they get bent? Never removed the CPU since install over 2yrs ago.

    what was up with it again? were there any bent pins? did you ask them what psu/memory they tested with as it could be that? i would sell it if you dont want it
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

Page 5 of 6 FirstFirst ... 3456 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •