Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 27 of 31 FirstFirst ... 172526272829 ... LastLast
Results 261 to 270 of 304

Thread: GZ-Z77X-UD5H Random freezing and shutdowns.




  1. #261
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: GZ-Z77X-UD5H Random freezing and shutdowns.

    was it any better on previous bios?
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  2. #262
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: GZ-Z77X-UD5H Random freezing and shutdowns.

    Reset CMOS, load optimized defaults and add vcore or dvid voltage

  3. #263
    deadelement is offline Junior Member
    Join Date
    Jun 2012
    Location
    UK
    Posts
    5

    Default Re: GZ-Z77X-UD5H Random freezing and shutdowns.

    Quote Originally Posted by Conners View Post
    Reset CMOS, load optimized defaults and add vcore or dvid voltage
    A single cmos reset did not help. How much should I add to the vcore and dvid voltage settings?

    Update: Something wrong with the Nvidia beta graphics driver, removed them and then was able to boot. However when I reinstall the driver, or even revert to the only official driver, refuses to boot again................. :s

    Here is my current situation:

    http://www.evga.com/forums/tm.aspx?h...page=1#1664715

    UPDATE: my old 8800GTS works fine in my new PC so I think my new card has died.
    Last edited by deadelement; 07-10-2012 at 04:23 AM.

  4. #264
    jcooper138 is offline Junior Member
    Join Date
    Jul 2012
    Location
    United States
    Posts
    3

    Default Re: GZ-Z77X-UD5H Random freezing and shutdowns.

    Quote Originally Posted by Lsdmeasap View Post
    BIOS fix for all Z77 with these modules will be coming, just have to hold on a little longer bud. Sorry you are having issues, I've sent in a report and will update here once I hear back with compatible BIOSes.

    *For anyone that missed my earlier post, please be sure to see my post here, and if my findings apply to you then the issue you are having may only be memory BIOS incompatibility issues (They'll get it sorted, just hang tight)
    GZ-Z77X-UD5H Random freezing and shutdowns.
    Was there ever a further update on this? I'm trying to get 4x4gb Samsung ram to go above 1600 stable and I get no joy with multiple settings. I've used Sin's Ivy Bridge OC guide and have a stable 4.5ghz CPU OC and the ram is fine at 1600 9-9-9-24-1T but any higher and I get the overclock failed message. I'm going to take another stab at it and wanted to know if any of the recent beta bios' have memory compatibility tweaks.

  5. #265
    Neoprimal is offline Junior Member
    Join Date
    Jul 2012
    Location
    Alexandria, Virginia, United States
    Posts
    3

    Default Re: GZ-Z77X-UD5H Random freezing and shutdowns.

    Hey all. Just throwing in my 2c vs. the people with freezing/crashing. I recently got this board myself and the main issue with any freezing/crashing for me has been the USB ports. It may not be the same for you guys, as I have a different stop code. Here's an example:

    This was probably caused by the following module: ntoskrnl.exe (nt+0x7F1C0)
    Bugcheck code: 0xF4 (0x3, 0xFFFFFA800F128300, 0xFFFFFA800F1285E0, 0xFFFFF800031CC510)
    Error: CRITICAL_OBJECT_TERMINATION
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that a process or thread crucial to system operation has unexpectedly exited or been terminated.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


    On Tue 7/24/2012 1:59:50 AM GMT your computer crashed
    crash dump file: C:\Windows\memory.dmp
    This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
    Bugcheck code: 0xF4 (0x3, 0xFFFFFA800F128300, 0xFFFFFA800F1285E0, 0xFFFFF800031CC510)
    Error: CRITICAL_OBJECT_TERMINATION
    Bug check description: This indicates that a process or thread crucial to system operation has unexpectedly exited or been terminated.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.

    I have not read through all 26 pages so I don't know if your issues have been solved or not.

    I managed to solve mine by removing certain devices from my VIA USB 3 ports. I know it sounds kind of nuts but whether by coincidence or not, I'm not crashing anymore. I think there's something up with the VIA ports, at least for some of us.
    I've been scouring the web seeing if this is a phenomenon and it seems to be in the z77-d3h, ud3h and ud5h boards but not everyone seems to be having problems (or not the same ones). Some people are saying their VIA USB 3 works with everything (on another forum I use) which throws my theory off a bit but I've confirmed that many are having the same problem on all these boards so it may just be a bad batch or something.
    So, for those experiencing weird freezing or reboots in Windows 7 (it does happen in Windows 8 too except that there's no event code in 8, you just freeze and have to reboot manually), try removing all devices from the VIA USB 3 port and putting them on the Intel USB 3 port (below the LAN) or USB 2 ports (from internal USB 2 brackets). Reboot and load up Windows. It may crash once more, just let it reboot and load up again. If it still crashes then perhaps this isn't the same issue I'm having. If it works then we're on to something.
    You can also try changing Smart AUTO/AUTO to ENABLED under the Peripherals/USB section of the BIOS. This MAY allow you to use the VIA ports, but you might still get a crash. Currently I have had to put my 2 USB 3 hard drives on the Intel ports and my keyboard either on the USB 2 port or the VIA USB 3 port with the BIOS option set to Enabled. If I move ANYTHING around on the back afterwards, like say plug the hard drive from Intel to VIA or move my hub or keyboard, Windows will BSOD. I have gone through BIOS F7-F12h which what I am now.

    Good Luck.

    I'll check back to see if this has helped anyone.



  6. #266
    gkatsanos is offline Junior Member
    Join Date
    Nov 2012
    Location
    Brussels
    Posts
    21

    Exclamation Re: GZ-Z77X-UD5H Random freezing and shutdowns.

    Hello to everyone.

    disclaimer: I'm not an overlocker or a gamer, I like a stock, cool and above all stable system. (Workstation?)

    Here are my problems on a non overclocked vanilla stock system because of the motherboard (if indeed that's the cause) (I guess so)

    - System didn't shut down. Basically the display went off, but power led and fans kept working.

    I found a suggestion to place the SATA cable / disk on the intel chipset and disable the Marvell controller. This solved the problem.

    - My wireless mouse and keyboard (logitech unifying) seem to have small freezes/pauses on random times. I took off the usb receiver and put it back on again and temporarily it was OK but after some minutes same again.

    I'm worried about having used @BIOS utility to upgrade (hadn't done my research at the time). Could it be that I have "mis-upgraded" my BIOS? It reports F14 version...


    A general question/remark/question for advice from more experienced: I wanted a stable, hassle-free system. (that's why I didn't buy a "K" version of the CPU, no intention to overclock, that's why I invested on good cooler and cpu.) So basically as after 14 version of the BIOS the problems seem to persist, should I be looking in sending this M/B back to Amazon? (I just bought/build the system 3 days ago)

    Subquestion related to the general one: Which M/B brand would you suggest as being very pro/stable on the same budget?
    Last edited by gkatsanos; 11-25-2012 at 08:34 PM. Reason: added disclaimer

  7. #267
    gkatsanos is offline Junior Member
    Join Date
    Nov 2012
    Location
    Brussels
    Posts
    21

    Default Re: GZ-Z77X-UD5H Random freezing and shutdowns.

    Any clue if there's a new Bios version coming to solve the problems mentioned?

  8. #268
    boondocks's Avatar
    boondocks is offline Senior Member
    Join Date
    Apr 2011
    Location
    Live Oak, Florida
    Posts
    1,652

    Default Re: GZ-Z77X-UD5H Random freezing and shutdowns.

    The @bios utility generally works fine. The preferred method is to use Qflash, but this is only because updating the bios from within Windows is always subject to the vagaries of the OS and whatever else you have running at the time. You can access Qflash when booting by spamming the End key, or just go into the bios and access Qflash from there.

    As for your mouse problems, you might try contacting Gigabyte and see if they will offer a bios to help with your particular problem.
    I've been using a Logitech RF mouse/KB through all iterations of the bios since the board launched with no problems, but there are some mice that have been problematic here and there.

    Sometimes it is helpful to update the backup bios to the same version as the main bios.

    Is that the only problem you are having?

    Edit: Using the Intel controller for your primary or OS drive is considered "normal". Does your Marvel ports not work at all after populating the the white Intel ports?
    Last edited by boondocks; 11-26-2012 at 06:57 PM.
    Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
    Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
    PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
    Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
    Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

    Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
    HTPC: Z68 Pro3 M / 2105

    SOLD:Z97X-UD5H /4790K/F11b mod BIOS/4.8@1.38 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
    SOLD:Z87X-UD5H /4770K


  9. #269
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: GZ-Z77X-UD5H Random freezing and shutdowns.

    i would manually type in the bclk/pci clock to 100mhz and set the pwm phase control to extreme performance,set vcore voltage response to fast and then repeatedly press alt and f10 together at the splash screen to update the back up bios chip with the main bios chip bios version,all those things will greatly help with stability @ stock or overclocked settings,auto doesnt always set things right
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  10. #270
    boondocks's Avatar
    boondocks is offline Senior Member
    Join Date
    Apr 2011
    Location
    Live Oak, Florida
    Posts
    1,652

    Default Re: GZ-Z77X-UD5H Random freezing and shutdowns.

    wazza, is there any reason TRIM would not work on the Marvell ports?
    (I know the Intel SATA III ports are preferred but what if those are already populated with SSD's, and one has more than two SSD's)
    Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
    Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
    PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
    Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
    Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

    Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
    HTPC: Z68 Pro3 M / 2105

    SOLD:Z97X-UD5H /4790K/F11b mod BIOS/4.8@1.38 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
    SOLD:Z87X-UD5H /4770K


Page 27 of 31 FirstFirst ... 172526272829 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •