Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 6 FirstFirst 12345 ... LastLast
Results 21 to 30 of 60

Thread: Help me hit the elusive 4.0 EP45-UD3P + Q9550




  1. #21

    Default Re: Help me hit the elusive 4.0 EP45-UD3P + Q9550

    Quote Originally Posted by Conners View Post
    Lodingi FWIW here is my settings for 4.1GHz. Your milage may vary.

    Code:
    GIGABYTE GA-EP45-UD3P F11d modified
    
    MB Intelligent Tweaker(M.I.T.) 
    Robust Graphics Booster ..................: [Fast]
    CPU Clock Ratio ..........................: 8x
    Fine CPU Clock Ratio......................: +5.0
    CPU Frequency ............................: 4.1GHz (483x8.5)
    
    Clock Chip Control  
    Standard Clock Control 
    CPU Host Clock Control........................: [Enabled]
    CPU Host Frequency (Mhz) .....................: [483]
    PCI Express Frequency (Mhz) ..................: [100]
    C.I.A. 2......................................: [Disabled] 
    
    >>>Advanced Clock Control [Press Enter] 
    CPU Clock Drive...........................: 800[mv] 
    PCI Express Clock Drive...................: 900[mv] 
    CPU Clock Skew (ps).......................: [0ps] 
    MCH Clock Skew (ps).......................: [0ps] 
    
    >>>DRAM Performance Control 
    Performance Enhance....................: [Turbo] 
    Extreme Memory Profile (X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch.................: [Auto] 
    System Memory Multiplier ..............: [2.00D]  
    Memory Frequency (Mhz) ................: [966MHz] 
    DRAM Timing Selectable ................: [Manual] 
    
    >>>Standard Timing Control 
    CAS Latency Time..............................:  [5]
    tRCD .........................................:  [5]
    tRP...........................................:  [5]
    tRAS..........................................:  [15]
    Advanced Timing Control [Press Enter] 
    tRRD...........................................: [4]
    tWTR...........................................: [4]
    tWR............................................: [6]
    tRFC...........................................: [56]
    tRTP...........................................: [4]
    Command Rate (CMD) ............................: [2]
    
    >>>Channel A 
    >>>Channel A Timings Settings [Press Enter]  
    Static tRead Value............................: [8]
    tRD Phase0 Adjustmen..........................: [Auto]
    tRD Phase1 Adjustment.........................: [Auto]
    tRD Phase2 Adjustment ........................: [Auto]
    tRD Phase3 Adjustment.........................: [Auto]
    Trd2rd(Different Rank)........................: [Auto] 
    Twr2wr(Different Rank)........................: [Auto]  
    Twr2rd(Different Rank)........................: [Auto] 
    Trd2wr(Same/Diff Rank)........................: [Auto]
    Dimm1 Clock Skew Control......................: [Auto]
    Dimm2 Clock Skew Control......................: [Auto]
    DDR Write Training ...........................: [Auto]
    Channel A Driving Settings [Press Enter]  
    Driving Strength Profile......................: [1066]
    Data Driving Pull-Up Level....................: [Auto]
    Cmd Driving Pull-Up Level.....................: [Auto]
    Ctrl Driving Pull-Up Level....................: [Auto]
    Clk Driving Pull-Up Level.....................: [Auto]
    Data Driving Pull-Down Level..................: [Auto]
    Cmd Driving Pull-Down Level...................: [Auto]
    Ctrl Driving Pull-Down Level..................: [Auto]
    Clk Driving Pull-Down Level...................: [Auto]
    
    >>>Channel B 
    >>>Channel B Timings Settings [Press Enter]  
    Static tRead Value............................: [8]
    tRD Phase0 Adjustmen..........................: [Auto]
    tRD Phase1 Adjustment.........................: [Auto]
    tRD Phase2 Adjustment ........................: [Auto]
    tRD Phase3 Adjustment.........................: [Auto]
    Trd2rd(Different Rank)........................: [Auto]
    Twr2wr(Different Rank)........................: [Auto]
    Twr2rd(Different Rank)........................: [Auto]
    Trd2wr(Same/Diff Rank)........................: [Auto]
    Dimm1 Clock Skew Control......................: [Auto]
    Dimm2 Clock Skew Control......................: [Auto]
    DDR Write Training ...........................: [Auto]
    Channel B Driving Settings [Press Enter]  
    Driving Strength Profile......................: [1066]
    Data Driving Pull-Up Level....................: [Auto]
    Cmd Driving Pull-Up Level.....................: [Auto]
    Ctrl Driving Pull-Up Level....................: [Auto]
    Clk Driving Pull-Up Level.....................: [Auto]
    Data Driving Pull-Down Level..................: [Auto]
    Cmd Driving Pull-Down Level...................: [Auto]
    Ctrl Driving Pull-Down Level..................: [Auto]
    Clk Driving Pull-Down Level...................: [Auto]
    
    >>>Motherboard Voltage Control
    Voltage Type..........Normal................ CPU
    Load Line Calibration......................: [Enabled]
    CPU Vcore.............1.25000..............: [1.36250V] 
    CPU Termination…......1.200V*..............: [1.340V]
    CPU PLL...............1.500V*..............: [1.570V]
    CPU Reference.........0.760V*..............: [.873V] 
    MCH/ICH 
    MCH Core..............1.100V...............: [1.32V] 
    MCH Reference.........0.760V...............: [.888V] 
    MCH/DRAM Ref..........0.900V...............: [1.010V] 
    ICH I/O...............1.500V...............: [1.500V] 
    ICH Core..............1.100V...............: [1.100V] 
    DRAM 
    DRAM Voltage..........1.800V...............: [2.120V] 
    DRAM Termination......0.900V...............: [1.010V] 
    Channel A Reference...0.900V...............: [Auto]
    Channel B Reference...0.900V...............: [Auto]
    
    >>>Advanced Settings
    Limit CPUID Max. to 3......................: [Disabled]
    No-Execute Memory Protect..................: [Disabled]<---Enable this
    CPU Enhanced Halt (C1E)....................: [Disabled]
    C2/C2E State Support.......................: [Disabled]
    x C4/C4E State Support.....................: [Disabled]
    CPU Thermal Monitor 2(TM2) ................: [Enabled]
    CPU EIST Function..........................: [Disabled]
    Virtualization Technology..................: [Disabled]
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled] *Note* Must be enabled to flash from USB
    Very nice. I noticed you have a different bios. I didn't see it on Gigabyte's site.
    Antec Twelve Hundred Case**Gigabyte EP45-UD3P Rev 1.1 - F8 BIOS**BFG EX-1000 PSU**Intel Q9550 @ Stock**CM Hyper-212 Plus Cooler**G.Skill 4x2 GB DDR2 1000**2xWD 1TB Caviar Black 32MB Cache Raid0**Maxtor One Touch 4 Plus 1 TB **Vision-Tek Radeon 4870X2 (2 gig)**Asus VE276Q 27" Monitor**Win7 Ultimate 64

  2. #22

    Default Re: Help me hit the elusive 4.0 EP45-UD3P + Q9550

    Quote Originally Posted by Chike View Post
    In fact there is not much chnage from what you had before, except the tRD(Static tRead Value) which should acually be less stable (better performance).
    How did you figure the CPU Reference, the default is 0.76.
    Try with 10MHz FSB increments, but you may want to run blend defaults again before you do.
    Hmm. I don't recall changing that setting.
    Antec Twelve Hundred Case**Gigabyte EP45-UD3P Rev 1.1 - F8 BIOS**BFG EX-1000 PSU**Intel Q9550 @ Stock**CM Hyper-212 Plus Cooler**G.Skill 4x2 GB DDR2 1000**2xWD 1TB Caviar Black 32MB Cache Raid0**Maxtor One Touch 4 Plus 1 TB **Vision-Tek Radeon 4870X2 (2 gig)**Asus VE276Q 27" Monitor**Win7 Ultimate 64

  3. #23
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: Help me hit the elusive 4.0 EP45-UD3P + Q9550

    Quote Originally Posted by Lodingi View Post
    Very nice. I noticed you have a different bios. I didn't see it on Gigabyte's site.
    Most MFR's are always slow on updating their own website. Latest bios can be found here http://forums.tweaktown.com/gigabyte...beta-bios.html. The moddified one that conners is using can be found here GIGABYTE Modified Bios
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  4. #24
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Help me hit the elusive 4.0 EP45-UD3P + Q9550

    Yes I used the F11d bios when it came out way back when then switched to the F11d modified bios when it came out. I like to use the newest bioses. Only difference I can see is I now need one more click up on my vcore to like 1.27xxxV. But CPUZ reports it as 1.248V loaded so cool right. I thank acebmxer for providing the modified version. If someone else provided it accept my apology and give thanks to you.

  5. #25

    Default Re: Help me hit the elusive 4.0 EP45-UD3P + Q9550

    Quote Originally Posted by Acebmxer View Post
    Most MFR's are always slow on updating their own website. Latest bios can be found here http://forums.tweaktown.com/gigabyte...beta-bios.html. The moddified one that conners is using can be found here GIGABYTE Modified Bios
    I appreciate that. Thanks for sharing.

    Quote Originally Posted by Conners View Post
    Yes I used the F11d bios when it came out way back when then switched to the F11d modified bios when it came out. I like to use the newest bioses. Only difference I can see is I now need one more click up on my vcore to like 1.27xxxV. But CPUZ reports it as 1.248V loaded so cool right. I thank acebmxer for providing the modified version. If someone else provided it accept my apology and give thanks to you.
    For giggles, I tried your settings, kept my ram settings & couldn't even post. I seem to remember having a difficult time with my DS3R board as well. Perhaps my ram is not up to the task.
    Antec Twelve Hundred Case**Gigabyte EP45-UD3P Rev 1.1 - F8 BIOS**BFG EX-1000 PSU**Intel Q9550 @ Stock**CM Hyper-212 Plus Cooler**G.Skill 4x2 GB DDR2 1000**2xWD 1TB Caviar Black 32MB Cache Raid0**Maxtor One Touch 4 Plus 1 TB **Vision-Tek Radeon 4870X2 (2 gig)**Asus VE276Q 27" Monitor**Win7 Ultimate 64

  6. #26
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Help me hit the elusive 4.0 EP45-UD3P + Q9550

    Well lol you could try a Static tRead value of 9 or 10.

  7. #27

    Default Re: Help me hit the elusive 4.0 EP45-UD3P + Q9550

    Quote Originally Posted by Conners View Post
    Well lol you could try a Static tRead value of 9 or 10.
    I did. :)

  8. #28
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Help me hit the elusive 4.0 EP45-UD3P + Q9550

    AH ok, sorry. I was just looking at you last bios settings you show an 8.5 x 400 to be 3.706GHz. That can't be correct should be 3.4GHz at those numbers. Ne who please comfirm where your at. If indeed your at 3.7 GHz shall we try 3.91GHz?

  9. #29

    Default Re: Help me hit the elusive 4.0 EP45-UD3P + Q9550

    Quote Originally Posted by Conners View Post
    AH ok, sorry. I was just looking at you last bios settings you show an 8.5 x 400 to be 3.706GHz. That can't be correct should be 3.4GHz at those numbers. Ne who please comfirm where your at. If indeed your at 3.7 GHz shall we try 3.91GHz?
    Oops. Sorry. I'm at 400 fsb.

  10. #30
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Help me hit the elusive 4.0 EP45-UD3P + Q9550

    if you want to try a 425 fsb just change it to that and let us know what happens.

Page 3 of 6 FirstFirst 12345 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •