Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 35

Thread: More problems with my EP45-UD3P




  1. #11
    Join Date
    Jan 2009
    Location
    Scotland, UK
    Posts
    34

    Default Re: More problems with my EP45-UD3P

    Quote Originally Posted by profJim View Post
    In theory, your are correct.
    Your quickie approach often works, but.....
    There are many instances in the forum when even the extended cmos clear did not work until it was repeated with the battery removed, psu unplugged, etc.
    I didn't create the detailed approach, but I've seen many cases where the detailed cmos clear finally cleared things up and let the system boot.

    What is so frightening about the detailed approach that I suggested?
    Is it a PITA? Yep, kind of.
    Does it often work when other approaches fail? Yes.
    Does it always work? No.
    I don't doubt that an extended OVERKILL approach may have been found necessary with some of the many mobo types out there.

    However, my point was more about what was necessary for the EP45-UD3P; which is the subject of this thread. And it's a mobo which I've had a number of years experience with experimental hardware/software trials where clearing the CMOS had on occasion become a necessary part !
    Last edited by jimmor; 05-19-2012 at 04:51 PM.
    The more I know, the more I know I don't know...

  2. #12
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: More problems with my EP45-UD3P

    The more I know, the more I know I don't know...
    I find that hard to believe.
    Readers of this thread are free to adopt either procedure.
    We are here to share information and experience.
    I originally said:
    In some cases, you will need to:
    Debating the cmos clearing options further will not help solve the issue at hand.
    Any further posts in this thread debating quick versus extended cmos clearing techniques will be deleted.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  3. #13
    Koksik22 is offline Junior Member
    Join Date
    Dec 2015
    Location
    Poland
    Posts
    13

    Default Re: More problems with my EP45-UD3P

    Quote Originally Posted by profJim View Post
    In some cases, you will need to:
    • unplug the power supply from the wall outlet
    • remove the motherboard battery
    • press and hold the front panel on/off switch for 15 - 30 seconds
    • place a jumper block on the CLR_CMOS pins for 15 minutes, several hours or overnight

    Don't forget to remove the jumper block and replace the battery before re-starting your system.
    You should immediately:
    • enter the bios
    • load optimized settings
    • save settings and exit
    • re-enter the bios
    • make any required bios settings
    • save settings and exit

    Read the user manual that describes saving and loading up to 8 different bios profiles.
    This will make it easier for you to save different bios profiles while testing and/or overclocking.
    Man you save my EP45-UD3P, i tried everything and yesterday i was going to throw out my mainboard, somehow i found your post tried block cmos for 20hours and its working like new one. thank you soo much.

  4. #14
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: More problems with my EP45-UD3P

    You're welcome, glad to help out.

    I have never needed to use the "overkill" procedure, but over the years I've seen this procedure fix many motherboards when other procedures failed.

    Welcome to the forum and thanks for posting about your success.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  5. #15
    Koksik22 is offline Junior Member
    Join Date
    Dec 2015
    Location
    Poland
    Posts
    13

    Default Re: More problems with my EP45-UD3P

    Quote Originally Posted by profJim View Post
    You're welcome, glad to help out.

    I have never needed to use the "overkill" procedure, but over the years I've seen this procedure fix many motherboards when other procedures failed.

    Welcome to the forum and thanks for posting about your success.
    problem backs, in month pc turn off 2 times and i couldnt make him work till i used your overkill procedure again
    Last edited by Koksik22; 12-31-2015 at 09:43 AM.

  6. #16
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: More problems with my EP45-UD3P

    Random boot problems can be caused by a power supply that is failing.
    Can you borrow a newer, good quality power supply to test with?
    How old is your power supply?
    What is the brand name and model number of your power supply?

    With an older system there might be corrosion with electrical contacts.
    Is there any corrosion on the cmos battery or in the cmos battery socket?

    The cmos battery might have voltage that is too low and this might be part of the problem.

    Hopefully the problem is not caused by a failing motherboard.
    Are any of the screws that secure your motherboard to the computer case loose?
    Have you checked to see if all of the hardware, cables and wires are fully seated and that none of the attached hardware is loose?

    Were there any recent changes to your system before the first time that your system recently could not boot?


    If your system is overclocked, try using standard settings for one morth or longer instead of the overclocked settings.

    We need detailed information about ALL OF THE HARDWARE in your system.

    We can best help you after you create a detailed hardware list in the System Specs
    portion of your forum profile at the bottom of the profile page or in your forum signature.
    Be sure to include brand names and model numbers.
    When you are done editing or creating your hardware list, save the settings.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  7. #17
    Koksik22 is offline Junior Member
    Join Date
    Dec 2015
    Location
    Poland
    Posts
    13

    Default Re: More problems with my EP45-UD3P

    @profJim

    Tested on other power supply and was same, its ibox 550w.
    tested voltage battery have 3 volts, how you know then its not problem of mainboard?
    i cant save settings in bios when i change something its just not going to boot.
    im not overlocking antything for now since my mainboard would not wake up.
    from 3 days its okay he didnt turn off but when gonna turn off not gonna wake up for sometime till he gonna rest.
    i saw some corrosion on metal part of battery box but its soo small..
    Last edited by Koksik22; 01-10-2016 at 06:41 PM.

  8. #18
    Koksik22 is offline Junior Member
    Join Date
    Dec 2015
    Location
    Poland
    Posts
    13

    Default Re: More problems with my EP45-UD3P





    that marked thing is controller for fans, taked it from car its connected to fans and psu 12v
    Last edited by Koksik22; 01-10-2016 at 07:01 PM.
    Xeon X5460
    Gigabyte GA-EP45-UD3P
    3x 1GB DDR2 KVR800D2N6/1G Kingston
    Radeon HD 5830
    PSU IBOX 550W
    SSD Samsung 840 Evo
    Case Lian Li PC-V750
    CPU Cooler Thermaltake Silver Arrow SB-E EXTREME

  9. #19
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: More problems with my EP45-UD3P

    I need you to post your full hardware specifications in the System Specs section in your forum profile and click on the Save Changes option at the bottom of the page after you have entered all of the data. You can find the bios version number by pressing F9 at the main screen of the bios.

    Install the free HWiNFO software, run this program using the display sensors option and post a screen-shot of the HWiNFO window.

    Install a new motherboard battery and see if it helps. The normal battery voltage is usually higher than 3.0 volts.

    Here are my HWiNFO sensor results:

    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  10. #20
    Koksik22 is offline Junior Member
    Join Date
    Dec 2015
    Location
    Poland
    Posts
    13

    Default Re: More problems with my EP45-UD3P

    Checked 3 batteries currect what i use have 3.14V

    i have that bios [MOD] LGA775 Support For LGA771 Xeon CPUs - Page 207

    all setup in bios is default. i puted my setup pc in singature aswell, on up you have photo of my pc

    i already order GA-EP45-UD3LR for 30 euro :

    P?yta GA-EP45-UD3LR + Core2Duo 2x2933 MHz + Cooler (5893977345) - Allegro.pl - Wi?cej ni? aukcje.

    but im interesed what is wrong in that EP45-UD3P



    Last edited by Koksik22; 01-10-2016 at 07:56 PM.
    Xeon X5460
    Gigabyte GA-EP45-UD3P
    3x 1GB DDR2 KVR800D2N6/1G Kingston
    Radeon HD 5830
    PSU IBOX 550W
    SSD Samsung 840 Evo
    Case Lian Li PC-V750
    CPU Cooler Thermaltake Silver Arrow SB-E EXTREME

Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •