Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: Settings OC i7 965 and x58 Extreme?




  1. #21
    Join Date
    Jan 2009
    Posts
    26

    Default Re: Settings OC i7 965 and x58 Extreme?

    Thanks Chike I didnīt know it. The temps show me Real temp and Aida are the same.
    Settings OC i7 965 and x58 Extreme?-temps-jpg

    My settings:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [28x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. AUTO 6,4 Ghz
    Uncore Frequency .......................... 3200
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................133
    PCI Express Frequency (MHz) ........... 100

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ 12X
    DRAM Timing Selectable (SPD) .......... [Manual]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................7
    tRCD ....................................... 7
    tRP ......................................... 7
    tRAS ....................................... 24

    Advance Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... 1.31875
    QPI/VTT Voltage 1.150v ............ 1.255
    CPU PLL 1.800v ....................... Default

    MCH/ICH
    PCIE 1.500v ...........................Default
    QPI PLL 1.100v .......................Default
    IOH Core 1.100v .....................Default
    ICH I/O 1.500v .......................Default
    ICH Core 1.1v ........................Default

    DRAM
    DRAM Voltage 1.500v ..............1.640
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

    What is better, up the clock ratio or the bclk frecuency?
    Thanks
    Last edited by jatar; 06-06-2012 at 04:07 AM. Reason: add a picture
    <<< System Summary >>>
    > Power Supply:Corsair 1000W
    > Mainboard : Gigabyte GA-EX58 Extreme Bios F12
    > Chipset : X58
    > Processor : Intel Nehalen i7 965 oc 4.4Ghz
    > CPU HeatSink and Fan (HSF): R.L. Danger Den + 6 fan in case Cooler Master Cosmos
    > Physical Memory :3x2Gb OCZ 1600
    > Video Card : 2x EVGA Gtx 580
    > Monitor Type : 2x Samsung T240HD
    > Operating System : Windows8 Pro and OsX Mountain Lion 10.8.2

  2. #22
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Settings OC i7 965 and x58 Extreme?

    I just wanted to make sure it is not the "CPU" temp reading from AIDA.
    Could you laso attach a text report of CPU-Z, CPU-Z -> About tab -> Save Report (.TXT), then in the forum "Go Advanced" -> Manage Attachments below, and attach the file. This will give an almost complete details about your system.

  3. #23
    Join Date
    Jan 2009
    Posts
    26

    Default Re: Settings OC i7 965 and x58 Extreme?

    Hi again, I have modded the mainboard and changed the graphic card. I have tried other settings and I canīt up to 4,01 Ghz. If a have Hyperth. the max. o.c is 3,8. My new settings for FSX are:


    My settings:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [30x]
    Intel(R) Turbo Boost Tech .................. [Disabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Disabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. AUTO 6,4 Ghz
    Uncore Frequency .......................... 3200
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................133
    PCI Express Frequency (MHz) ........... 100

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ 12X
    DRAM Timing Selectable (SPD) .......... [Manual]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................7
    tRCD ....................................... 7
    tRP ......................................... 7
    tRAS ....................................... 24

    Advance Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... 1.35625
    QPI/VTT Voltage 1.150v ............ 1.355
    CPU PLL 1.800v ....................... Default

    MCH/ICH
    PCIE 1.500v ...........................Default
    QPI PLL 1.100v .......................Default
    IOH Core 1.100v .....................Default
    ICH I/O 1.500v .......................Default
    ICH Core 1.1v ........................Default

    DRAM
    DRAM Voltage 1.500v ..............1.640
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

    When I run Prime95 and it is in the 3 pass I have blue screen with error 0x00000101, if I up Vcore then the error change to 0x00000124 and the I up Qtt, and again error 0x0000101...
    I think itīs no possible with mi mainboard more than 4ghz.
    CPUz:JATAR-PC.txt
    Regards.
    <<< System Summary >>>
    > Power Supply:Corsair 1000W
    > Mainboard : Gigabyte GA-EX58 Extreme Bios F12
    > Chipset : X58
    > Processor : Intel Nehalen i7 965 oc 4.4Ghz
    > CPU HeatSink and Fan (HSF): R.L. Danger Den + 6 fan in case Cooler Master Cosmos
    > Physical Memory :3x2Gb OCZ 1600
    > Video Card : 2x EVGA Gtx 580
    > Monitor Type : 2x Samsung T240HD
    > Operating System : Windows8 Pro and OsX Mountain Lion 10.8.2

  4. #24
    Join Date
    May 2011
    Location
    norway
    Posts
    37

    Default Re: Settings OC i7 965 and x58 Extreme?

    Advanced CPU Features:
    CPU Clock Ratio ................................ [21x]
    Intel(R) Turbo Boost Tech .................. [Disabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Disabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... 3200
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... 200
    PCI Express Frequency (MHz) ........... [100]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Profile1]
    System Memory Multiplier (SPD) ........ [8.0]
    DRAM Timing Selectable (SPD) .......... [Quick]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ..................... 8 auto
    tRCD ....................................... 8 auto
    tRP ......................................... 8 auto
    tRAS ....................................... 24 auto


    ##Channel A Advanced Timing Control##
    tRC ........................................ 41 auto
    tRRD ....................................... 6 auto
    tWTR ...................................... 6 auto
    tWR ........................................ 12 auto
    tWTP ....................................... 24 auto
    tWL ........................................ 8 auto
    tRFC ....................................... 88 auto
    tRTP ....................................... 6 auto
    tFAW ...................................... 30 auto
    Command Rate (CMD) ................ 2 auto

    ##Channel A Misc Timing Control##
    Round Trip Latency ................... 56 auto

    B2B CAS Delay .......................... - auto



    Advanced Voltage Control:
    CPU

    Load Line Calibration ................. Level 1
    CPU Vcore ............................... 1.389
    QPI/VTT Voltage 1.150v ............ 1.315
    CPU PLL 1.800v ....................... Auto

    MCH/ICH
    PCIE 1.500v ........................... 1.5
    QPI PLL 1.100v ....................... 1.2
    IOH Core 1.100v ..................... 1.14
    ICH I/O 1.500v ....................... 1.5
    ICH Core 1.1v ........................ 1.14

    DRAM
    DRAM Voltage 1.500v .............. 1.66
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    Cooler Master HAF X Big Tower
    Gigabyte X58A-OC F5b
    i7 960 D0 with EK waterblock @4.2Ghz
    Corsair Dominator DHX+ DDR3 1600MHz 12GB
    OCZ Vertex 3 120gb MAX IOPS
    3x 2TB WD Caviar Green hdd
    2x EVGA 480 GTX SLi with EK waterblock OC@core 851Mhz/memory2202Mhz
    Chieftec Nitro Series BPS-1200 1200W
    Dual boot with linux

    big thanks to Acebmxer and Lsdmeasap

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •