Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 7 of 7

Thread: Tweak Launcher 1.0




  1. #1
    Ken429 is offline Senior Member
    Join Date
    Aug 2009
    Location
    Valapariso, Indiana
    Posts
    516

    Default Tweak Launcher 1.0

    Am I doing something wrong with Tweak Launcher V1.0? When I run it on my system it shows the DDR at 1333 MHz grayed out. I am using Mushkin 1600 memory and I have the MB set to Profile 1. It all looks good in the BIOS? Also, Tweak Launcher VCore shows 1.26V when the system is idle? It is running with all the stock settings except the multiplier is set to 42. ET6 says the VCore is ~1.18V under load and ~.960 when idle? Sure would be nice if one of these programs had the right information.

  2. #2
    Join Date
    Feb 2011
    Location
    TW
    Posts
    149

    Default Re: Tweak Launcher 1.0

    I suggest you can try upgrade the BIOS to newer ver F8 and the newer tweak luncher B12.0426 from gigabyte website: GIGABYTE - Motherboard - Socket 1155 - GA-Z77X-UD5H (rev. 1.0)

  3. #3
    Ken429 is offline Senior Member
    Join Date
    Aug 2009
    Location
    Valapariso, Indiana
    Posts
    516

    Default Re: Tweak Launcher 1.0

    I am using the latest version of Tweak Launcher (12.04.26.1). I was going to upgrade to F8 until I saw a couple of threads that said it did not fix the wireless Mouse and Keyboard issue so I have held off waiting for F9. I guess I can try flashing yet another BIOS update but I don't have much confidence that it will fix the Tweak Launcher issue.

  4. #4
    stasio's Avatar
    stasio is offline GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,688

    Default Re: Tweak Launcher 1.0

    Do you have installed latest Intel® INF Driver 9.3.xx and Intel® Management Engine Interface(MEI) Driver 8.1.xx ?
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  5. #5
    Ken429 is offline Senior Member
    Join Date
    Aug 2009
    Location
    Valapariso, Indiana
    Posts
    516

    Default Re: Tweak Launcher 1.0

    Best I can tell I have all the latest stuff from the Gigabyte site installed.
    GIGABYTE - Motherboard - Socket 1155 - GA-Z77X-UD5H (rev. 1.0)
    It looks like the latest MEI version on the site is 8.0.0.1351??
    I made a couple of screen dumps to show that TweakLauncher is getting the same information as ET6. Maybe I just don't understand what it's telling me.

    I guess I can on add one image per post(?) but the voltage shown by ET6 is 1.25v.
    Attached Images Attached Images Tweak Launcher 1.0-launch1-jpg 
    Last edited by Ken429; 06-25-2012 at 07:59 PM.

  6. #6
    stasio's Avatar
    stasio is offline GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,688

    Default Re: Tweak Launcher 1.0

    As per pic's above,all OK.
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  7. #7
    Ken429 is offline Senior Member
    Join Date
    Aug 2009
    Location
    Valapariso, Indiana
    Posts
    516

    Default Re: Tweak Launcher 1.0

    Is it safe to say Tweak Launcher only works with an Ivy Bridge CPU?
    Attached Images Attached Images Tweak Launcher 1.0-tweaklauncher2600k-jpg 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •