Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: GA-MA74GMT-S2 (rev 1.4) 3.87gb usable




  1. #11

    Default Re: GA-MA74GMT-S2 (rev 1.4) 3.87gb usable

    Quote Originally Posted by srikanth09555 View Post
    The main is the data transfer rate which is not more than 35 - 40 mb/sec. How to improve that data transfer speeds.... and
    what device is only giving these slow speeds? Internal hard drive? USB hard drive? I can't imagine that being your RAM memory speeds. Also, what program is report these speeds?

    An SSD drive will greatly improve transfer speeds over hard drives, especially write speeds.

    [QUOTEI have a kingston DDR 3 1333 4Gb so what ram should i go for if want more 4gb?[/QUOTE]

    You can get any of the memory on the memory support list at gigabyte's website:
    GIGABYTE - Motherboard - Socket AM3 - GA-MA74GMT-S2 (rev. 1.4)

    I like getting generic low density type memory. without heat sinks on them like Dell, HP, Gateway, etc. use. I'd just buy an 8GB set instead of having two different 4GB sets.

    I have used these on several boards with success:
    Newegg.com - G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model F3-10600CL9D-8GBNT

    or these Kingston:
    Newegg.com - Kingston 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model KVR1333D3N9K2/8G

    But they won't help much, if any, on your transfer rate problem.

    -=Mark=-
    ASRock Z68 Extreme3 Gen3 i7 2600K 8GB (2 x 4GB) G.Skill 1333 CL9 MSI HD 7750 Corsair TX850 80Plus

    GigaByte A75-UD4H AMD A*-3870K 8GB (2X4GB) G.Skill 1866 CL8 On-Chip 6550D Antec EA-450 80Plus Platinum

  2. #12
    Join Date
    Feb 2011
    Location
    TW
    Posts
    149

    Default Re: GA-MA74GMT-S2 (rev 1.4) 3.87gb usable


Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •