Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: z77x-Ud3H back panel usb




  1. #11
    Join Date
    Dec 2010
    Location
    Near Toronto but not in it
    Posts
    624

    Default Re: z77x-Ud3H back panel usb

    Quote Originally Posted by bruxup View Post
    Thanks for the quick response! I tried downloading and upgrading the chipset firmware (VIA VL800 if I'm not mistaken) but did not see any results. I'm at work right now, but I'll try uninstalling the drivers again and check off that box to delete the files as I don't think I did that.

    I'll give it another go tonight and hope for the best. I'll keep you posted if anything comes up.

    Thanks again!
    But for your board there are Intel USB 3.0 drivers as well... Why would they have Via and Intel drivers available?

    Vin
    Main Rig
    OS = Win8.1
    CPU = i7-980X @ 4.17Ghz 144x29 cooled by custom Loop
    Mem = 12GB 2000Mhz corsair Dominator GT at 2010Mhz @ 9-10-9-27-2T
    MB = Gigabyte GA-X58A-UD5 v1.0 with F6 Bios - Dead Board
    MB = EVGA X58 Classified3 e770
    GPU = 2x Sapphire r9 290x in xfire
    HD = 2x Toshiba 120GB Raid 0 (580MB Read/140MB Write)
    Storage = 2TB WD Black
    PSU = EVGA SuperNOVA 1300w
    Case = Cooler Master HAF-X 945

    HTPC / Home Server
    OS = Win7 64Bit running XBMC HTPC Front end with Windows Server 2011 Virtual Machine with 8GB ram assigned for homer server with exchange
    CPU = AMD 1090T
    Mem = 16GB 1600Mhz Kingston RED Limited Edition running at 1600Mhz
    MB = Gigabyte 790FXTA-UD5
    GPU- EVGA GT210
    HD = too many to count, but about 5TB of storage all together including backup
    PSU = Corsair TX750
    Case = Too embarrassed to mention.

  2. #12
    bruxup is offline Junior Member
    Join Date
    Oct 2012
    Location
    Toronto, ON
    Posts
    7

    Default Re: z77x-Ud3H back panel usb

    Quote Originally Posted by Vinster View Post
    But for your board there are Intel USB 3.0 drivers as well... Why would they have Via and Intel drivers available?

    Vin
    I believe there are 2 separate USB controllers. The Intel ones (beside the Ethernet) are native USB 2.0 so you can still use a USB keyboard and mouse to install the OS. The Intel drivers are to make the USB 2.0 ports USB 3.0, which successfully work...it's the 4 other VIA ones I've had nothing but problems with.

    Tried uninstalling all drivers (and selected to delete files), rebooted and reinstalled latest drivers and still experiencing the same issues...I have relentlessly searched Gigabyte & VIA's websites and got the latest controller packs, drivers and everything. I find it hard to believe that there isn't a fix out there for this but I cannot figure it out for the life of me...
    Last edited by bruxup; 10-17-2012 at 01:58 PM.

  3. #13
    bruxup is offline Junior Member
    Join Date
    Oct 2012
    Location
    Toronto, ON
    Posts
    7

    Default Re: z77x-Ud3H back panel usb

    Hey all...I actually got through to Gigabyte's Tech Support (GGTS) and they suggested something that (somewhat) works and I wanted to share it with everyone else having these problems.

    I did this and instantly the USB 3.0 ports began working...oddly though, on a fresh boot-up it worked...but if I remove the device and try plugging it in again, then the same issues occur. Very weird.

    At least I'm able to use USB 3.0 when I first turn on or restart my computer...hahaha.
    While not a complete fix, it's at least a step in the right direction. Hope this helps and you all have better luck than me.

    Let me know. Cheers!


    Please try the following:

    1. Uninstall all existing USB 3.0 driver.
    2. Remove CMOS battery for 10-15Mins.
    3. Download and reinstall both USB 3.0 driver again:

    http://download.gigabyte.us/FileList/Driver/mb_driver_via_usb3.exe

    http://download.gigabyte.us/FileList/Driver/mb_driver_intel_usb3.exe

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •