Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 30 of 30

Thread: Can mobo cause constant BSOD and freezing while gaming?




  1. #21
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Can mobo cause constant BSOD and freezing while gaming?

    add vcore or dvid offset which ever using... Or if your could post your relevant bios settings this would help as we are not mind readers like my friend says.

  2. #22
    Junk87 is offline Junior Member
    Join Date
    Aug 2012
    Location
    usa
    Posts
    13

    Default Re: Can mobo cause constant BSOD and freezing while gaming?

    There aren't really any relevant settings, it is all set to auto since i cleared the CMOS. Do you want screenshots of the bios?

  3. #23
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Can mobo cause constant BSOD and freezing while gaming?

    LOL no relevant settings... Try this template out for size it for the sniper 3 but I bet it will work...
    Change all the <---Change this to your settings and maybe we can then get somewhere... These are relevent settings..
    Code:
    CPU = Model # Intel 3770K<---Change this to your setting
    Motherboard = G1.Sniper3, Revision 1.0<---Change this to your setting
    BIOS Version = F6a<---Change this to your setting
    Ram = Samsung Green 8GB 2x4GB MV-3V4G3D/US Dual Channel DDR3 <---Change this to your setting
    
    MIT Current Status..................................[ENTER]
    
    Advanced Freqency Settings..........................[ENTER]
    CPU/PCIe Base Clock................100.00MHz........[Auto] <---Auto is ok
    Processor Graphics Clock...........1150.............[Auto]
    CPU Clock Ratio....................35...............[45] <---Change this to your setting
    CPU Frequency......................3.5GHz...........4.50GHz
    
    Advanced CPU Core Features..........................[ENTER]
    Intel(R) Turbo Boost Technology.....................[AUTO]
      Turbo Ratio (1-Core Active.......39...............[AUTO]
      Turbo Ratio (2-Core Active.......39...............[AUTO]
      Turbo Ratio (3-Core Active.......38...............[AUTO]
      Turbo Ratio (4-Core Active.......37...............[AUTO]
    Turbo Power Limit (WATTS)..........77...............[300]<---Change this to your setting
    Core Current Limit (AMPS)..........112..............[200]<---Change this to your setting
    CPU Core Enable....................4................[AUTO]
    Hyper-Threading Technology..........................[AUTO]
    CPU Enhanced Halt(C1E)..............................[AUTO]
    C3/C6 State Support.................................[AUTO]
    CPU Thermal Monitor.................................[AUTO]
    CPU EIST Function...................................[Auto]
    
    System Memory Multiplier..........[16]..............[21.33]<---Change this to your setting
    Memory Frequency..................1600MHz...........2133MHZ
    
    Advanced Memory Settings............................[ENTER]
    Performance Enhanced................................[TURBO]<---Change this to your setting
    Dram Timing Slectable...............................[QUICK]<---Change this to your setting
    Profile DDR Voltage...............1.50V.............[1.50V]
    Profile VTT Voltage...............1.05V.............[1.05V]
    Channel Interleaving................................[AUTO]
    Rank Interleaving...................................[AUTO]
    
    [ENTER] Channel A Timing Settings
    Channel A Standard Timing Control
    CAS Latency.......................11................[10]<---Change this to your setting
    tRCD..............................11................[10]<---Change this to your setting
    tRP...............................11................[10]<---Change this to your setting
    tRAS..............................28................[28]<---Change this to your setting
    
    Standard A Advanced Timing Control
    tRC...............................39................[AUTO]
    tRRD..............................5.................[AUTO]
    tWTR..............................6.................[AUTO]
    tWR...............................12................[AUTO]
    tWTP..............................24................[AUTO]
    tWL...............................8.................[AUTO]
    tRFC..............................128...............[AUTO]
    tRTP..............................6.................[AUTO]
    tFAW..............................24................[AUTO]
    Command Rate(tCMD)................1.................[1]
    tRW Stability Level...............3.................[AUTO]
    TWR Stability Level...............3.................[AUTO] <<<-- Left all settings off after this
    
    [ENTER] Channel B Timing Settings
    Channel B Standard Timing Control
    CAS Latency.......................11................[10]
    tRCD..............................11................[10]
    tRP...............................11................[10]
    tRAS..............................28................[28]
    
    Standard B Advanced Timing Control
    tRC...............................39................[AUTO]
    tRRD..............................5.................[AUTO]
    tWTR..............................6.................[AUTO]
    tWR...............................12................[AUTO]
    tWTP..............................24................[AUTO]
    tLW...............................8.................[AUTO]
    tRFC..............................128...............[AUTO]
    tRTP..............................6.................[AUTO]
    tFAW..............................24................[AUTO]
    Command Rate(tCMD)................1.................[1]
    tRW Stability Level...............3.................[AUTO]
    TWR Stability Level...............3.................[AUTO] <<<-- Left all settings off after this
    
    Advanced Voltage Settings...........................[ENTER]
    3D Power Control....................................[ENTER]
    PM Phase ConTrol....................................[ext Pref]<---Change this to your setting
    Vcore Voltage Response..............................[FAST]<---Change this to your setting
    Vcore Loadline Calibration..........................[HIGH]<---Change this to your setting
    GFX Voltage Loadline Calibration....................[AUTO]
    DDR CH(A/B) Voltage Loadline Calibration............[AUTO]
    CPU Vtt Loadline Claibration........................[AUTO]
    
    Vcore Protection...................250.0mV..........[AUTO]
    DDR CH(A/B) Voltage Protection.....250.0mV..........[AUTO]
    
    Vcore Current Protection............................[AUTO]
    CPU Vtt Current Protection..........................[AUTO]
    GFX Current Protection..............................[AUTO]
    DDR CN(A/B) Current Protection......................[AUTO]
    
    Vcore Protection...................250.0mV..........[AUTO]
    DDR CH(A/B) Voltage Protection.....250.0mV..........[AUTO]
    
    Vcore Current Protection............................[AUTO]
    CPU Vtt Current Protection..........................[AUTO]
    GFX Current Protection..............................[AUTO]
    DDR CH(A/B) Current Protection......................[AUTO]
    
    Vcore PWM THermal Protection.......130.0C..........[AUTO]
    DDR CH(A/B) PWM Thermal Protection.130.0C..........[AUTO]
    
    CPU PWM Switch Rate................500.0KHz.........[AUTO]
    GFX PWM Switch Rate................250.0KHz.........[AUTO]
    CPU Vtt PWM Switch Rate............250.0KHz.........[AUTO]
    DDR CH(A/B) PWM Switch Rate........250.0KHz.........[AUTO]
    
    CPU Core Voltage Control
    CPU Vcore..........................1.195V............[Normal]<---Change this to your setting
    DYnamic V core(DVID)...............+0.00v............[+0.015V]<---Change this to your setting
    CPU Vtt............................1.050V............[AUTO]
    CPU PLL............................1.800V............[AUTO]
    IMC................................0.925V............[Auto]
    Dynamic GFX Core(VAXG DVID)........+0.000V...........[AUTO]
    
    DRAM Voltage Control
    DRAM Voltage......(CH A/B).........1.500V............[1.555V]<---Change this to your setting
    DRAM Termination..(CH A/B).........0.750V............[AUTO]
    Data Reference....(CH A)...........0.750V............[Auto]
    Address Reference.(CH A)...........0.750V............[AUTO]
    Data Reference....(CH B)...........0.750V............[AUTO]
    Address Reference.(CH B)...........0.750V............[AUTO]
    Last edited by Conners; 09-01-2012 at 05:20 AM.

  4. #24
    Junk87 is offline Junior Member
    Join Date
    Aug 2012
    Location
    usa
    Posts
    13

    Default Re: Can mobo cause constant BSOD and freezing while gaming?

    I have already tried changing all of those in the past, it made no difference.

    The only thing i can see on there that i haven't tried would be:

    PM Phase control
    Performance Enhanced has always been default at Turbo





    What does the performance enhance in the memory settings do exactly?

  5. #25
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Can mobo cause constant BSOD and freezing while gaming?

    Well good luck my friend in your endevors. I can't help you if you don't help me help you.

  6. #26
    Junk87 is offline Junior Member
    Join Date
    Aug 2012
    Location
    usa
    Posts
    13

    Default Re: Can mobo cause constant BSOD and freezing while gaming?

    Its not helping to tell me to do things i have already tried, but thanks for trying anyway.

    I think im going to look into replacing this board, apparently gigabyte is still beta testing the Z77.

    I couldn't even use my mouse or keyboard to install windows, i had to borrow a PS/2 keyboard from a friend.

  7. #27
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Can mobo cause constant BSOD and freezing while gaming?

    Most likely its an EBKAC and not the motherboard, but I could be wrong.

  8. #28
    Junk87 is offline Junior Member
    Join Date
    Aug 2012
    Location
    usa
    Posts
    13

    Default Re: Can mobo cause constant BSOD and freezing while gaming?

    Quote Originally Posted by Conners View Post
    Most likely its an EBKAC and not the motherboard, but I could be wrong.
    You are, but thanks for the smart ass and next to worthless posts attempting and failing to help.

  9. #29
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Can mobo cause constant BSOD and freezing while gaming?

    the performane enhance just tightens up the secondary(advanced) memory timings,i always left that on standard on my old x58,have you played around with each llc setting yet?theres also a cpu power phase percentage setting i think,idk what gigabyte labels it as but on my board i have it at 120%

    you might wanna try popping out the mb battery and fully clearing the cmos,leave it out for 30mins,then load optimized defaults and start over with your bios settings just so you know where you are ect,ive seen corruped cmos's give instability
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  10. #30
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Can mobo cause constant BSOD and freezing while gaming?

    Yelp def a noob looking for answers but not willing to apply oneself. A typical NOOB. I bet you they always wanted to rma the board cause they fuped in their selection. Now Your and my price for the same board will go up for their incompetence. Shame on you for screwing the rest of us...

    Heck I wouldn't be surprised that you have your OS so corrupted it would never work. But in this case it prob a noob case of PEBSBAC.
    Last edited by Conners; 09-01-2012 at 09:02 AM.

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •