Re: Fresh Install X79-UD3 Mobo, EASYTUNE executes(ET6SC.EXE) then application closes
For me on my GA-X58A-UD5 and my other AMD builds I had found that ET6 was slow and sometimes buggy when trying to execute changes in FSB. All it seemed good for was monitoring fan speeds and temps.
what I eneded up doing was removing ET6 and used other utilities that accomplished the same things.
for Temps I used HW Monitor, for Overclocking I used SetFSB (don't know if the x79 is supported though). Unfortunately then are using 2 applications instead of one, but neither of these applications require to start when windows start.
so if all you need is On-Demand monitoring or OC'ing on the fly then these may be of better use.
OS = Win8.1
CPU = i7-980X @ 4.17Ghz 144x29 cooled by custom Loop
Mem = 12GB 2000Mhz corsair Dominator GT at 2010Mhz @ 9-10-9-27-2T
MB = Gigabyte GA-X58A-UD5 v1.0 with F6 Bios - Dead Board
MB = EVGA X58 Classified3 e770
GPU = 2x Sapphire r9 290x in xfire
HD = 2x Toshiba 120GB Raid 0 (580MB Read/140MB Write)
Storage = 2TB WD Black
PSU = EVGA SuperNOVA 1300w
Case = Cooler Master HAF-X 945
HTPC / Home Server
OS = Win7 64Bit running XBMC HTPC Front end with Windows Server 2011 Virtual Machine with 8GB ram assigned for homer server with exchange
CPU = AMD 1090T
Mem = 16GB 1600Mhz Kingston RED Limited Edition running at 1600Mhz
MB = Gigabyte 790FXTA-UD5
GPU- EVGA GT210
HD = too many to count, but about 5TB of storage all together including backup
PSU = Corsair TX750
Case = Too embarrassed to mention.