Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Get the most out of RAM




  1. #11
    Join Date
    Dec 2010
    Location
    Near Toronto but not in it
    Posts
    625

    Default Re: Get the most out of RAM

    If you are OK, then that great... with the mild setting changes you wouldn't had noticed any real increases...

    what Blue Screens did you get? did you note them?

    Vin
    Main Rig
    OS = Win8.1
    CPU = i7-980X @ 4.17Ghz 144x29 cooled by custom Loop
    Mem = 12GB 2000Mhz corsair Dominator GT at 2010Mhz @ 9-10-9-27-2T
    MB = Gigabyte GA-X58A-UD5 v1.0 with F6 Bios - Dead Board
    MB = EVGA X58 Classified3 e770
    GPU = 2x Sapphire r9 290x in xfire
    HD = 4x PNY 120GB Raid 0
    Storage = 2TB WD Black
    PSU = EVGA SuperNOVA 1300w
    Case = Cooler Master HAF-X 945

    HTPC / Home Server
    OS = Win7 64Bit running XBMC HTPC Front end with Windows Server 2011 Virtual Machine with 8GB ram assigned for homer server with exchange
    CPU = AMD 1090T
    Mem = 16GB 1600Mhz Kingston RED Limited Edition running at 1600Mhz
    MB = Gigabyte 790FXTA-UD5
    GPU- EVGA GT210
    HD = too many to count, but about 5TB of storage all together including backup
    PSU = Corsair TX750
    Case = Too embarrassed to mention.

  2. #12
    Join Date
    Dec 2012
    Location
    nj
    Posts
    18

    Default Re: Get the most out of RAM

    yep, it was 0x0000007b stop error.

    When I put the settings back, it was fine. It could possibly be though that the X58 doesn't support 1600.
    So I don't know may be I'll try it with the other speeds like 1333 but may be not, we'll see.

  3. #13
    Join Date
    Dec 2010
    Location
    Near Toronto but not in it
    Posts
    625

    Default Re: Get the most out of RAM

    1600 shouldn't be an issue in an x58, I ran memory at 1600 for a few years and recently setup 2000Mhz and that's what in my rig now...

    for help if you want to get that up there and sorted out you need to provide all your bios settings. otherwise if you're happy. then we're good.

    Vin
    Main Rig
    OS = Win8.1
    CPU = i7-980X @ 4.17Ghz 144x29 cooled by custom Loop
    Mem = 12GB 2000Mhz corsair Dominator GT at 2010Mhz @ 9-10-9-27-2T
    MB = Gigabyte GA-X58A-UD5 v1.0 with F6 Bios - Dead Board
    MB = EVGA X58 Classified3 e770
    GPU = 2x Sapphire r9 290x in xfire
    HD = 4x PNY 120GB Raid 0
    Storage = 2TB WD Black
    PSU = EVGA SuperNOVA 1300w
    Case = Cooler Master HAF-X 945

    HTPC / Home Server
    OS = Win7 64Bit running XBMC HTPC Front end with Windows Server 2011 Virtual Machine with 8GB ram assigned for homer server with exchange
    CPU = AMD 1090T
    Mem = 16GB 1600Mhz Kingston RED Limited Edition running at 1600Mhz
    MB = Gigabyte 790FXTA-UD5
    GPU- EVGA GT210
    HD = too many to count, but about 5TB of storage all together including backup
    PSU = Corsair TX750
    Case = Too embarrassed to mention.

  4. #14
    Join Date
    Dec 2012
    Location
    nj
    Posts
    18

    Default Re: Get the most out of RAM

    Thank you Vin I will keep that in mind. Which info would you need exactly? If I change my mind about it I will post that info up.

  5. #15
    Join Date
    Dec 2010
    Location
    Near Toronto but not in it
    Posts
    625

    Default Re: Get the most out of RAM

    Quote Originally Posted by essotereh View Post
    Thank you Vin I will keep that in mind. Which info would you need exactly? If I change my mind about it I will post that info up.
    Advanced CPU Features:
    CPU Clock Ratio ................................. [xx] (x.xx GHz)
    Intel(R) Turbo Boost Tech ................... [xx]
    CPU Cores Enabled ............................. [All]
    CPU Multi Threading ........................... [xx]
    CPU Enhanced Halt (C1E) .................... [xx]
    C3/C6/C7 State Support ..................... [xx]
    CPU Thermal Monitor .......................... [xx]
    CPU EIST Function ............................. [xx]
    Virtualization Technology .................... [xx]
    Bi-Directional PROCHOT ...................... [xx]

    QPI Clock Ratio ................................. [xx] (xxGHz)
    Uncore Clock Ratio ............................ [xx] (xxMHz)
    Isonchronous Support ........................ [xx]
    Virtualization Technology .................... [xx]

    Standard Clock Control:
    Base Clock (BCLK) Control ................... [xxMHz]
    PCI Express Frequency (MHz) .............. [xxMHz]

    Advanced Clock Control:
    CPU Clock Drive ................................ [xx]
    PCI Express Clock Drive ...................... [xx]
    CPU Clock Skew ................................ [xx]
    IOH Clock Skew ................................ [xx]

    Advanced DRAM Features:
    Extreme Memory Profile (X.M.P) ........... [xx]
    Performance Enhance ........................ [xx]
    System Memory Multiplier (SPD) .......... [xx] (xx MHz)
    DRAM Timing Selectable (SPD) ............ [xx]

    Channel A / B /C Timing Settings:
    CAS Latency Time ............................ [xx]
    tRCD .............................................. [xx]
    tRP ................................................ [xx]
    tRAS .............................................. [xx]
    CR................................................ . [xx]

    Advanced Voltage Control:
    Load Line Calibration ......................... [xx]
    CPU Vcore ...................................... [xxv]
    QPI/VTT Voltage 1.150v .................... [xxxx]
    CPU PLL 1.800v ............................... [xxxx]
    PCIE 1.500v .................................... [xxxx]
    QPI PLL 1.100v ................................ [xx]
    IOH Core 1.100v .............................. [xx]
    ICH I/O 1.500v ................................ [xx]
    ICH Core 1.1v ................................. [xx]

    DRAM Voltage 1.500v ....................... [xxv]
    DRAM Termination 0.750v.................. [xxv]
    Ch-A Data VRef. 0.750v ................... [xx]
    Ch-B Data VRef. 0.750v ................... [xx]
    Ch-C Data VRef. 0.750v ................... [xxv]
    Ch-A Address VRef. 0.750v ............... [xx]
    Ch-B Address VRef. 0.750v ............... [xx]
    Ch-C Address VRef. 0.750v ............... [xx]

    Vin
    Main Rig
    OS = Win8.1
    CPU = i7-980X @ 4.17Ghz 144x29 cooled by custom Loop
    Mem = 12GB 2000Mhz corsair Dominator GT at 2010Mhz @ 9-10-9-27-2T
    MB = Gigabyte GA-X58A-UD5 v1.0 with F6 Bios - Dead Board
    MB = EVGA X58 Classified3 e770
    GPU = 2x Sapphire r9 290x in xfire
    HD = 4x PNY 120GB Raid 0
    Storage = 2TB WD Black
    PSU = EVGA SuperNOVA 1300w
    Case = Cooler Master HAF-X 945

    HTPC / Home Server
    OS = Win7 64Bit running XBMC HTPC Front end with Windows Server 2011 Virtual Machine with 8GB ram assigned for homer server with exchange
    CPU = AMD 1090T
    Mem = 16GB 1600Mhz Kingston RED Limited Edition running at 1600Mhz
    MB = Gigabyte 790FXTA-UD5
    GPU- EVGA GT210
    HD = too many to count, but about 5TB of storage all together including backup
    PSU = Corsair TX750
    Case = Too embarrassed to mention.

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •