Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 6 of 6 FirstFirst ... 456
Results 51 to 53 of 53

Thread: Gigabyte GA-X58-UD5 random reboots




  1. #51
    keung is offline Junior Member
    Join Date
    Nov 2012
    Location
    Norway
    Posts
    32

    Default Re: Gigabyte GA-X58-UD5 random reboots

    Fail-Safe

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. 4.8 GHz
    Uncore Clock Ratio ......................... [Auto]
    Uncore Frequency .......................... 2133MHz (Always 2x memory Multi or 2x +1)
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) .................... 133
    PCI Express Frequency (MHz) ........... [Auto]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO]
    DRAM Timing Selectable (SPD) .......... [Auto]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ..................... 7 Auto
    tRCD ....................................... 7 Auto
    tRP ......................................... 7 Auto
    tRAS ....................................... 16 Auto
    
    Below values may be left in Auto if you like, generally this is fine.  For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread
    
    ##Channel A Advanced Timing Control##
    tRC ........................................ 27  Auto (Should be = tRAS + tRP or above for stability)
    tRRD ....................................... 4 Auto
    tWTR ...................................... 4 Auto (Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR ........................................ 8 Auto
    tWTP ...................................... 19 Auto   (tWTP Must = tWR + tWL + 4)
    tWL ........................................ 7 Auto   (tWL Must be CAS Latency -1)
    tRFC ....................................... 60 Auto
    tRTP ....................................... 4 Auto
    tFAW ...................................... 16 Auto
    Command Rate (CMD) ................ 1 Auto
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ................... 47 Auto
    
    B2B CAS Delay .......................... - Auto
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... 1.28750V Auto
    QPI/VTT Voltage 1.150v ............ 1.150V Auto
    CPU PLL 1.800v ....................... 1.800V Auto
    
    MCH/ICH
    PCIE 1.500v ........................... 1.500V Auto
    QPI PLL 1.100v ....................... 1.100V Auto
    IOH Core 1.100v ..................... 1.100V Auto
    ICH I/O 1.500v ....................... 1.500V Auto
    ICH Core 1.1v ........................ 1.100V Auto
    
    DRAM
    DRAM Voltage 1.500v .............. 1.500V Auto
    DRAM Termination 0.750v [AUTO] 
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    Optimized

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. 4.8GHz
    Uncore Clock Ratio ......................... [Auto]
    Uncore Frequency .......................... 2133MHz (Always 2x memory Multi or 2x +1)
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) .................... 133
    PCI Express Frequency (MHz) ........... [Auto]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO]
    DRAM Timing Selectable (SPD) .......... [Auto]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ..................... 7 Auto
    tRCD ....................................... 7 Auto
    tRP ......................................... 7 Auto
    tRAS ....................................... 16 Auto
    
    Below values may be left in Auto if you like, generally this is fine.  For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread
    
    ##Channel A Advanced Timing Control##
    tRC ........................................ 27  Auto (Should be = tRAS + tRP or above for stability)
    tRRD ....................................... 4 Auto
    tWTR ...................................... 4 Auto (Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR ........................................ 8 Auto
    tWTP ...................................... 19 Auto   (tWTP Must = tWR + tWL + 4)
    tWL ........................................ 7 Auto   (tWL Must be CAS Latency -1)
    tRFC ....................................... 60 Auto
    tRTP ....................................... 4 Auto
    tFAW ...................................... 16 Auto
    Command Rate (CMD) ................ 1 Auto
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ................... 47 Auto
    
    B2B CAS Delay .......................... - Auto
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... 1.28750V Auto
    QPI/VTT Voltage 1.150v ............ 1.150V Auto
    CPU PLL 1.800v ....................... 1.800V Auto
    
    MCH/ICH
    PCIE 1.500v ........................... 1.500V Auto
    QPI PLL 1.100v ....................... 1.100V Auto
    IOH Core 1.100v ..................... 1.100V Auto
    ICH I/O 1.500v ....................... 1.500V Auto
    ICH Core 1.1v ........................ 1.100V Auto
    
    DRAM
    DRAM Voltage 1.500v .............. 1.500V Auto
    DRAM Termination 0.750v [AUTO] 
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    Doesn't seem like there are any differences between the two. I did fail to mention one thing, Prime95 doesn't run for long in fail safe either, it actually freezes instead of reboots. Someone mentioned this could be a CPU problem. Getting a second hand X58 motherboard was harder than expected, but I'm going to try to see if I can get a second hand i7 920 (or similar)
    Last edited by keung; 01-30-2013 at 10:46 AM.

  2. #52
    keung is offline Junior Member
    Join Date
    Nov 2012
    Location
    Norway
    Posts
    32

    Default Re: Gigabyte GA-X58-UD5 random reboots

    My computer must be possessed. I booted the computer with Optimized settings, it complained about being unable to load windows and rolled back to an older backup. When in Windows, I redownloaded Prime95 and started it. So far it's been running for 2 hours without rebooting or freezing. I'm going to let it run for a while longer and see if anything happens. It looks promising, though!

  3. #53
    keung is offline Junior Member
    Join Date
    Nov 2012
    Location
    Norway
    Posts
    32

    Default Re: Gigabyte GA-X58-UD5 random reboots

    I'd just like to make one final post to this thread in case someone surfs into this (as I did with another similar thread). I solved this problem by replacing a faulty S-ATA cable. My system is now very stable and runs just fine.

    Thanks to profJim and wazza300 for tremendous support!

Page 6 of 6 FirstFirst ... 456

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •