Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: EP35-DS3L wont work




  1. #1
    will_s is offline Junior Member
    Join Date
    Jan 2012
    Location
    Australia
    Posts
    71

    Default EP35-DS3L wont work

    Well had to get an adapter for the CPU power ...8 pin down to 4 pin but when I plug that in it just starts then reboots and goes into that cycle

    If I dont plug it in it fires up and lights come on the mobo but nothing appears on the monitor

    Maybe time to throw it into the bin but I will give it one last twirl

    btw: no beeps....i dont think the aduio gadget/switch is any good
    Asus Strix X99 Intel 6800K Corsair Dominator 4x8gm 2666 DDR4b Nvidia 1080Corsair HX1000iPSU Corsair 780T Corsair H115i CPU Cooler Samsung 950 M.2

  2. #2
    Join Date
    Dec 2010
    Location
    Near Toronto but not in it
    Posts
    624

    Default Re: EP35-DS3L wont work

    What power supply are you using, can you list out the HW and Bios revision if you can.

    Vin
    Main Rig
    OS = Win8.1
    CPU = i7-980X @ 4.17Ghz 144x29 cooled by custom Loop
    Mem = 12GB 2000Mhz corsair Dominator GT at 2010Mhz @ 9-10-9-27-2T
    MB = Gigabyte GA-X58A-UD5 v1.0 with F6 Bios - Dead Board
    MB = EVGA X58 Classified3 e770
    GPU = 2x Sapphire r9 290x in xfire
    HD = 2x Toshiba 120GB Raid 0 (580MB Read/140MB Write)
    Storage = 2TB WD Black
    PSU = EVGA SuperNOVA 1300w
    Case = Cooler Master HAF-X 945

    HTPC / Home Server
    OS = Win7 64Bit running XBMC HTPC Front end with Windows Server 2011 Virtual Machine with 8GB ram assigned for homer server with exchange
    CPU = AMD 1090T
    Mem = 16GB 1600Mhz Kingston RED Limited Edition running at 1600Mhz
    MB = Gigabyte 790FXTA-UD5
    GPU- EVGA GT210
    HD = too many to count, but about 5TB of storage all together including backup
    PSU = Corsair TX750
    Case = Too embarrassed to mention.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •