Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: GA-7PESH3 Memory problem




  1. #1
    Join Date
    Feb 2009
    Posts
    5

    Default GA-7PESH3 Memory problem

    Hi,

    I hope someone can help me.

    I just finished building a high end PC workstation using the GA 7Pesh3 motherboard. The problem is that the board will only boot using 64Gb of memory and not the full 128Gb.

    The memory I have is 8 x Samsung DDR3 1600 16Gb ECC/Registered (M393B2G70QH0 - YK0)


    • Mfr Part Number: M393B2G70QH0-YK0
    • Type: DDR3
    • Capacity: 16GB
    • Speed: PC12800 1600MHz
    • Size & Bit: 1G x 4
    • Pins: 240pin
    • ECC: Yes
    • Registered: Yes
    • Chip: Samsung
    • CL 11, 1.35V


    Moderator Note (- wardog -): Edited Title to insert MB model
    Last edited by - wardog -; 03-10-2014 at 07:06 AM.

  2. #2
    Spyone1 is offline Member
    Join Date
    Jan 2014
    Location
    Australia
    Posts
    102

    Default re: GA-7PESH3 Memory problem

    Full details of your computer would be helpful.

    What CPU are you using? If you are using an E5-1600 Processor, I believe you won't see half of your RAM (see the 2nd link below, the bottom table on that page).

    I found a couple of tables on the GA website that explain what type of RAM will be recognized when depending on processor, although I don't know if that will help.
    For more powerful Xeon processors
    For less powerful Xeon processors

    MAIN PC
    CPU
    - i7-3820 @ 3.60Ghz
    MB - AsRock X79 Extreme6 (Bios P2.80)
    RAM - 2 x 8Gb Patriot Viper 1866 CL10 Series @933Mhz
    GPU - ASUS Radeon HD 7870 Direct CU II (2Gb) x 2 (XFire)
    CASE - Fractal Design Desire R4 Black Case (windowless)
    FANS - Standard Fan CPU, 5 x FD Silent 2 140mm Fans in case
    PSU - Thermaltake R2 800W
    SSD - Sandisk SDSSDHP2 240Gb (boot)
    HDD - 2 x Seagate ST2000DM001 2Tb HDD (Storage)
    SYS - Win7 x64 Ultimate
    KB - Logitech K350 Wireless
    MOU -
    Razor Naga Molten mouse
    MON - ASUS VS247H (1920 x 1080)
    UPS - Belkin Line Interactive 1400VA 840W
    System is not overclocked at all.
    2ND PC
    AMD FM2 A10-7850K @ 3.70Ghz
    AsRock FM2A88X Extreme6+ (Bios P2.90)
    2 x 4Gb G.Skill Ripjaws F3-12800CL9D-8GBXL

    Kaveri Spectre Desktop (onboard) @ 760Mhz
    Thermaltake V9 case (1 x 120mm, 1 x 240mm fan)
    Corsair H80i Water Cooler w/2 x 120mm fans
    Seasonic G-Series (SSR-650RM Active PFC F3) 650W

    OCZ Vertex 4 120Gb SSD (Boot)
    2 x ST2000DM001 2Tb HDD (Storage)
    Win7 X64 Ultimate
    Logitech G15 (6 G Keys) USB
    Logitech MX-518 mouse
    Phillips 22HFL3350D/10 (1920 x 1080)
    NAS - Netgear RN104-100AJS 4 Bay (not hooked in)
    Not overclocking


  3. #3
    Join Date
    Feb 2009
    Posts
    5

    Default Re: GA-7PESH3 Memory problem

    Spyone1 thank you for the prompt reply and the links. Also here is my full PC spec.

    GA - 7Pesh3 MB
    2 x E5-2680 CPU
    8 x 16Gb ECC/Registered DDR3 1600 DIMM
    3 x Samsung 840 EVO 1Tb SSS's
    Gainward GTX 760 Phantom
    2 x Noctua NH-D14 CPU Cooler
    Fractal D. Define XL R2 Titanium ATX
    Be quiet! Dark P. Pro P10 1000W ATX23

  4. #4
    jjnstn is offline Junior Member
    Join Date
    Dec 2014
    Location
    minnesota, usa
    Posts
    1

    Default Re: GA-7PESH3 Memory problem

    It seems I am having memory problems with my new gigabyte 7pesh3 motherboard. I am building a new system. Kingston 16GB 1600 ecc rdimm (KVR16R11S8K4/16), onboard video until I get system installed, ssd 256GB HD, a single E5 2620 v2 2.1Ghz (second in the mail).

    Initial start up brought me to the bios. All looked good so I saved and exit. Since then it starts to no bios, and two red led are lit on the motherboard. The motherboard chirps a consistent chirp (not beep). Having a hard time finding info on the red leds and the chirping sound. One forum suggested bad ram :(

    Any help would be greatly appreciated,
    thank you
    Jeff

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •