Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 27 of 74 FirstFirst ... 17252627282937 ... LastLast
Results 261 to 270 of 737

Thread: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock




  1. #261
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    6 hour test passed :) (albeit with the system going to sleep for an hour)

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-post254-memtest-pass-6-hour-jpg

    Should I turn off the sleep setting in the balanced power plan?
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  2. #262
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Thumbs up Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    3.6GHz (9x401), 1.31250 vcore, all other settings unchanged.

    Booted into Windows fine, about to run a LinX test.

    I remembered to adjust TjMax = 85o in HWiNFO this time too!

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-post-262-jpg

    Code:
    Motherboard: Gigabyte GA-P35-DS3L Rev 2.0: BIOS Version: F9C
    CPU: Intel Xeon X5460
    RAM: Kingston Model: 4x2GB HyperX T1 DDR2-1066 CL5 Part#: KHX8500D2T1K2/4G (http://www.kingston.com/datasheets/KHX8500D2T1K2_4G.pdf)
    Power Supply Unit: Corsair HX520W
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio __________________ [9]
    Fine Clock Ratio __________________[0]
    CPU Host Clock Control____________[Enabled]
    CPU Host Frequency (MHz)_________[401]
    PCI Express Frequency (Mhz)________[101]
    C.I.A. 2__________________________[Disabled]
    Performance Enhance = ____________[Standard]
    System Memory Multiplier (SPD)_____[2.00]
    DRAM Timing Selectable_____ SPD ___[Manual]
     
    CAS Latency Time_______________5_[5]
    Dram RAS# to CAS# Delay________5_[5]
    Dram RAS# Precharge Delay_______5_[5]
    Precharge Delay (tRAS)__________18_[18]
     
    ACT to ACT Delay (tRRD)_________3_[Auto]
    Rank Write to READ Delay________3_[Auto]
    Write to Precharge Delay_________6_[Auto]
    Refresh to ACT Delay____________52_[Auto]
    Read to Precharge Delay__________3_[Auto]
    Static tRead Value_______________8_[8]
    Static tRead Phase Adjust_________0_[Auto]
     
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.1V]
    PCI-E OverVoltage Control_ [+0.1V]
    FSB OverVoltage Control___ [+0.1V]
    (G)MCH OverVoltage Control [+0.1V]
    CPU Voltage Control_______ [1.31250V]
    Normal CPU Vcore________1.23750V
    
    Hard Disk Boot Priority.....: [Press Enter]
    1.	Kingston SV300S37A240G
    2.	ST3500320AS
    3.	ST3500320AS
    First Boot Device...........: [Hard Disk]
    Second Boot Device......: [CDROM]
    Third Boot Device.........: [Disabled]
    Boot Up Floppy Seek.....: [Disabled]
    Password Check...........: [Setup]
    HDD S.M.A.R.T. Capability......: [Disabled]
    Limit CPUID Max. to 3.........: [Disabled]
    No-Execute Memory Protect.........: [Enabled]
    CPU Enhanced Halt (C1E)...........: [Disabled]
    CPU Thermal Monitor 2(TM2) ......: [Enabled]
    CPU EIST Function...............: [Disabled]
    Virtualization Technology..........: [Disabled]
    Full Screen LOGO Show.........: [Disabled]
    Init Display First............: [PEG]
    
    SATA AHCI Mode.........: [AHCI]
    SATA Port0-1 Native Mode.........: [Enabled]
    USB Controller...........: [Enabled]
    USB 2.0 Controller............: [Enabled]
    USB Keyboard Support............: [Disabled]
    USB Mouse Support..........: [Disabled]
    Legacy USB Storage Detect…….[Disabled]
    Azalia Codec............: [Auto]
    Onboard H/W LAN............: [Enabled]
    SMART LAN.................: [Press Enter]
    Onboard LAN Boot ROM.......: [Disabled]
    Onboard IDE Controller........: [Enabled]
    Onboard Serial Port 1..........: [3F8/IRQ4]
    Onboard Parallel Serial Port...: [378/IRQ7]
    Parallel Port Mode................: [SPP]
    
    ACP1 Suspend Type........: [S3(STR)]
    USB Device Wake-Up From S3..: [Disabled]
    Soft-Off by PWR-BTTN....: [Delay 4 Sec.]
    PME Event Wake Up.......: [Disabled]
    Power On by Ring.......: [Disabled]
    Resume by Alarm......: [Disabled]
    HPET Support..........: [Enabled]
    HPET Mode.............: [64-bit mode]
    Power On by Mouse.............: [Double Click]
    Power On by Keyboard.........: [Disabled]
    AC Back Function..................: [Soft-Off]
    
    Resources Controlled By.......[Auto]
    x IRQ Resources           Press Enter
    PCI Latency Timer (CLK)......: [32]
    PCI1 IRQ Assignment.............: [Auto]
    PCI2 IRQ Assignment.............: [Auto]
    PCI3 IRQ Assignment............: [Auto]
    
    Reset Case Open Status...........: [Disabled]
    CPU Warning Temperature.......: [80°C/176°F]
    CPU FAN Fail Warning...............: [Disabled]
    SYSTEM FAN2 Fail Warning.......: [Disabled]
    POWER FAN Fail Warning..........: [Disabled]
    SYSTEM FAN1 Fail Warning.......: [Disabled]
    CPU Smart FAN Control.............: [Disabled]
    Outcome to follow shortly...

    Edit: I went ahead and changed the balanced power plan to never put the system to sleep.
    Last edited by lukevega; 06-10-2014 at 07:46 AM. Reason: Power plan
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  3. #263
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    LinX passed :)

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-post-262-linx-passed-jpg

    10-12 hour HCi MemTest marathon here we come!
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  4. #264
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    It's good to see that you're making progress.

    At the end of each successful HCI Memtest session, are you spending at least one hour on your computer running various programs, games, watching videos, listening to music and doing detailed virus scans, etc to ensure that everything is running smoothly?

    Another excellent test is to create a very large zip file. You should then check the integrity of the zip file and then unzip the large zip file to new temporary folder. If you get any zip errors during this test this indicates that your system has problems.

    On my system the My Documents folder has 23,041 files, and takes up 19.8GB of space. This folder is located in one of my hard drive partitions, and not on my boot drive. Defragmenting one of your hard drive partitions is NOT a good idea unless you are really sure that your system is stable.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  5. #265
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    13 hour test passed:

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-post-264-hci-memtest-13-hour-pass-jpg

    :D

    Going to try making a big zip file now.
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  6. #266
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Zip test was a partial success?

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-zip-file-test-jpg

    I know there was one error but I think that file was a torrent which has been scanned by various antivirus programs over the years so this could be a reason it's corrupt?
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  7. #267
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Ok, well I saved the BIOS settings and decided to try 3.7GHz (9 x 412) at 3 clicks higher vcore = 1.33125V - I hope I'm not moving too fast here!

    Code:
    Motherboard: Gigabyte GA-P35-DS3L Rev 2.0: BIOS Version: F9C
    CPU: Intel Xeon X5460
    RAM: Kingston Model: 4x2GB HyperX T1 DDR2-1066 CL5 Part#: KHX8500D2T1K2/4G (http://www.kingston.com/datasheets/KHX8500D2T1K2_4G.pdf)
    Power Supply Unit: Corsair HX520W
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio __________________ [9]
    Fine Clock Ratio __________________[0]
    CPU Host Clock Control____________[Enabled]
    CPU Host Frequency (MHz)_________[412]
    PCI Express Frequency (Mhz)________[101]
    C.I.A. 2__________________________[Disabled]
    Performance Enhance = ____________[Standard]
    System Memory Multiplier (SPD)_____[2.00]
    DRAM Timing Selectable_____ SPD ___[Manual]
     
    CAS Latency Time_______________5_[5]
    Dram RAS# to CAS# Delay________5_[5]
    Dram RAS# Precharge Delay_______5_[5]
    Precharge Delay (tRAS)__________18_[18]
     
    ACT to ACT Delay (tRRD)_________3_[Auto]
    Rank Write to READ Delay________3_[Auto]
    Write to Precharge Delay_________6_[Auto]
    Refresh to ACT Delay____________52_[Auto]
    Read to Precharge Delay__________3_[Auto]
    Static tRead Value_______________8_[8]
    Static tRead Phase Adjust_________0_[Auto]
     
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.1V]
    PCI-E OverVoltage Control_ [+0.1V]
    FSB OverVoltage Control___ [+0.1V]
    (G)MCH OverVoltage Control [+0.1V]
    CPU Voltage Control_______ [1.33125V]
    Normal CPU Vcore________1.23750V
    
    Hard Disk Boot Priority.....: [Press Enter]
    1.	Kingston SV300S37A240G
    2.	ST3500320AS
    3.	ST3500320AS
    First Boot Device...........: [Hard Disk]
    Second Boot Device......: [CDROM]
    Third Boot Device.........: [Disabled]
    Boot Up Floppy Seek.....: [Disabled]
    Password Check...........: [Setup]
    HDD S.M.A.R.T. Capability......: [Disabled]
    Limit CPUID Max. to 3.........: [Disabled]
    No-Execute Memory Protect.........: [Enabled]
    CPU Enhanced Halt (C1E)...........: [Disabled]
    CPU Thermal Monitor 2(TM2) ......: [Enabled]
    CPU EIST Function...............: [Disabled]
    Virtualization Technology..........: [Disabled]
    Full Screen LOGO Show.........: [Disabled]
    Init Display First............: [PEG]
    
    SATA AHCI Mode.........: [AHCI]
    SATA Port0-1 Native Mode.........: [Enabled]
    USB Controller...........: [Enabled]
    USB 2.0 Controller............: [Enabled]
    USB Keyboard Support............: [Disabled]
    USB Mouse Support..........: [Disabled]
    Legacy USB Storage Detect…….[Disabled]
    Azalia Codec............: [Auto]
    Onboard H/W LAN............: [Enabled]
    SMART LAN.................: [Press Enter]
    Onboard LAN Boot ROM.......: [Disabled]
    Onboard IDE Controller........: [Enabled]
    Onboard Serial Port 1..........: [3F8/IRQ4]
    Onboard Parallel Serial Port...: [378/IRQ7]
    Parallel Port Mode................: [SPP]
    
    ACP1 Suspend Type........: [S3(STR)]
    USB Device Wake-Up From S3..: [Disabled]
    Soft-Off by PWR-BTTN....: [Delay 4 Sec.]
    PME Event Wake Up.......: [Disabled]
    Power On by Ring.......: [Disabled]
    Resume by Alarm......: [Disabled]
    HPET Support..........: [Enabled]
    HPET Mode.............: [64-bit mode]
    Power On by Mouse.............: [Double Click]
    Power On by Keyboard.........: [Disabled]
    AC Back Function..................: [Soft-Off]
    
    Resources Controlled By.......[Auto]
    x IRQ Resources           Press Enter
    PCI Latency Timer (CLK)......: [32]
    PCI1 IRQ Assignment.............: [Auto]
    PCI2 IRQ Assignment.............: [Auto]
    PCI3 IRQ Assignment............: [Auto]
    
    Reset Case Open Status...........: [Disabled]
    CPU Warning Temperature.......: [80°C/176°F]
    CPU FAN Fail Warning...............: [Disabled]
    SYSTEM FAN2 Fail Warning.......: [Disabled]
    POWER FAN Fail Warning..........: [Disabled]
    SYSTEM FAN1 Fail Warning.......: [Disabled]
    CPU Smart FAN Control.............: [Disabled]
    So far it has booted into Windows fine and I'm about to try a LinX test (here's hoping those temperatures stay down!)

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-post-267-jpg

    As always, I'll report back with results after.
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  8. #268
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Exclamation Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Well that serves me right for trying to go it alone!

    System froze during first pass of LinX - I took a photo with my phone:

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-fail-jpg

    Here is the HWiNFO log:

    Zippyshare.com - post267.CSV

    There was no minidump file.

    I know you said above 3.6GHz would require higher vcore increments so I'm hoping that is what's needed!

    I've reverted back to 3.6GHz BIOS settings for now.
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  9. #269
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    I no longer consider HCI Memtest to be a reliable stress testing program!!

    See the end of this post for more information.

    I am now using Prime95 for stress testing my recent 4.005GHz and 4.050GHz configurations.

    You did well with going it alone.
    It's possible that increasing (G)MCH OverVoltage Control and/or FSB OverVoltage Control to +0.2 might help.

    Your screen-shot shows that your maximum core temperatures are about 25o(C) below your 85o TjMax setting, so overheating shouldn't be a problem. If you were using TjMax = 100o, your maximum core temperatures would be about 75o(C), which isn't great but it is acceptable.

    If you are determined to o/c to 4.0GHz, your best bet is to switch to a Q9550 cpu with 8.5 x 333 = 2.83GHz or a Q9650 with 9.0 x 333 = 3.0GHz.
    A higher end motherboard such as a P35-DS4 or P35-DQ6 (rev: 1.1) will offer better bios tweaking voltage options and offer Load Line Calibration. There are also EP35 Gigabyte models that are virtually the same as the earlier P35 models. If you can find an EP45-UD3P or UD3R model at a reasonable price, that would be even better.

    Are any of these higher end boards guaranteed to overclock higher? No, but they probably will.
    Will the Q9550 or Q9650 overclock better than your Xeon 771 cpu with your P35-DS3L? Probably.

    You can use the forum's Advanced Search feature to search for Q9550 using the Search Titles Only option and you'll see how well others did with their EP45 motherboards.

    Check out AnanTech's AnandTech | Gigabyte GA-EP45-UD3P - P45 at its Finest review for a great read.
    AnandTech | Gigabyte GA-EP45-UD3P - P45 at its Finest, page 6 details their overclocking results with the E8600 and Q9550 processors.
    I wouldn't be happy running at their speeds where some of their voltage settings are higher than I'm comfortable with for everyday usage.

    Are any of the above upgrades worthwhile? I don't think so, but it's your decision. How fast are you willing to spend?

    Q9550 + EP45-UD3P: 4.25GHz overclock with 8GB memory

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-q9550-ep45-ud3p-4-25ghz-oc-8gb-ram-anandtech-review-jpg

    HCI Memtest is inferior to Prime95 for stress testing.

    I posted about several random "program not responding" issues when running IrfanView, a lightweight but excellent image editing program. I suspected that the 1.36875 cpu voltage might be too low and decided to go back to Prime95 to see if it too would pass an extended stress test. On three separate occasions, Prime 95 locked up my system at 45 minutes, 1.5 hours, and finally at 3hours, 54 minutes. There were no worker thread errors in any of these tests.

    I increased the cpu vcore voltage to 1.3750 volts and the current Prime95 Blend test has been running for over 6 hours, 20 minutes and is still running strong.

    In the not so "good old days" many of us would not consider our overclocked systems stable unless we successfully ran each of the Prime95 tests (Blend, Small FFT and Large FFT) without errors for 24 hours. I've mellowed somewhat and now consider my system to be stable after it runs each of the tests for 8 - 12 hours without errors.

    I will continue to post updates about my Q9650 system's overclocking results while Luke goes traveling for a while.
    Last edited by profJim; 06-12-2014 at 09:02 PM. Reason: added rev 1.1 for P35-DQ6
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  10. #270
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Q9650 @ 4.05GHz (9 x 450MHz) Prime95 Blend Stress Test #1

    The Prime95 Blend stress test ran for 12 hours and 18 minutes with no errors.

    A 12 hour Prime95 Small FFT test has been started and will conclude with a 12 hour Prime95 Large FFT test.

    As of now, the cpu core voltage increase from 1.36875 to 1.37500 volts has eliminated the Prime95 Blend test locking up my system.

    If I decide to try 4.099GHz (9 x 455MHz) I will have the dubious honor of repeating this series of three 12 hour Prime95 tests.




    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


Page 27 of 74 FirstFirst ... 17252627282937 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 12 users browsing this thread. (0 members and 12 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •