Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 43 of 74 FirstFirst ... 33414243444553 ... LastLast
Results 421 to 430 of 737

Thread: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock




  1. #421
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Exclamation Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Well it booted into Windows fine but it didn't like LinX:

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-xeon-4-0ghz-linx-error-jpg

    (TjMax = 85C)

    Code:
    ***************************************
    ***************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F11d
    ***************************************
    ***************************************
    ******************************
    MB Intelligent Tweaker(M.I.T.)
    ******************************
    Robust Graphics Booster ..............: [Auto]
    CPU Clock Ratio ......................: [9X]
    x Fine CPU Clock Ratio................: [+0.5]
    CPU Frequency ........................: 4.00GHz( 422x9.5)
    ********** Clock Chip Control ********
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [422]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    >>>>> Advanced Clock Control..........: [Press Enter]
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    ******** DRAM Performance Control ********
    Performance Enhance...................: [Turbo]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [Auto]
    Memory Frequency(Mhz).....800.........: 912
    DRAM Timing Selectable (SPD)..........: [Manual]
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [Auto]
    x tRCD ...........................5...: [Auto]
    x tRP.............................5...: [Auto]
    x tRAS...........................18...: [Auto]
    >>>>> Advanced Timing Control.........: [Press Enter]
    x tRRD............................3...: [Auto]
    x tWTR............................3...: [Auto]
    x tWR.............................6...: [Auto]
    x tRFC...........................52...: [Auto]
    x tRTP............................3...: [Auto]
    x Command Rate (CMD) .............0...: [Auto]
    >>>>> Channel A Timing Settings.......: [Press Enter]
    x Static tRead Value.............8...: [Auto]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    >>>>> Channel A Driving Settings......: [Press Enter]
    x Driving Strength Profile............: [Auto]
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    >>>>> Channel B Timing Settings.......: [Press Enter]
    x Static tRead Value.............8...: [Auto]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    >>>>> Channel B Driving Settings......: [Press Enter]
    x Driving Strength Profile............: [Auto]
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    ****** Motherboard Voltage Control ******
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Enabled]
    CPU Vcore..............1.23750V.......: [1.35000V]
    CPU Termination........1.200V.........: [1.260V]
    CPU PLL................1.500V.........: [1.570V]
    CPU Reference..........0.760V.........: [Auto]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.200V]
    MCH Reference..........0.760V.........: [Auto]
    MCH/DRAM Reference.....0.900V.........: [Auto]
    ICH I/O................1.500V.........: [Auto]
    ICH Core...............1.100V.........: [Auto]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.100V]
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    Quick Boot............................: [Disabled]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [Disabled]
    Boot Up Floppy Seek...................: [Disabled]
    Boot Up Num-Lock......................: [Off]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Disabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Bachup BIOS Image to HDD..............: [Disabled]
    Init Display First....................: [PEG]
    ******** Integrated Peripherals ********
    ICH SATA Control Mode.................: [AHCI]
    SATA Port0-3 Native Mode..............: [Enabled]
    Azalia Codec..........................: [Auto]
    Onboard H/W 1394......................: [Enabled]
    Onboard H/W Lan1......................: [Enabled]
    Onboard H/W Lan2......................: [Enabled]
    Green LAN.............................: [Disabled]
    Smart LAN1............................: [Press Enter]
    Smart LAN2............................: [Press Enter]
    Onboard LAN1 BOOT ROM.................: [Disabled]
    Onboard LAN2 BOOT ROM.................: [Disabled]
    Onboard SATA/IDE Device...............: [Enabled]
    Onboard SATA/IDE Ctrl Mode............: [AHCI]
    Onboard Serial Port 1.................: [3F8/IRQ4]
    Onboard Parallel Port.................: [378/IRQ7]
    Parallel Port Mode....................: [SPP]
    xECP Mode Use DMA.....................:  3
    USB Controllers.......................: [Enabled]
    USB Keyboard Function.................: [Disabled]
    USB Mouse Function....................: [Disabled]
    USB Storage Function..................: [Enabled]
    ******** Power Management Setup ********
    ACPI Suspend Type.....................: [S3(STR)]
    USB Device Wake-Up From S3............: [Enabled]
    Soft-Off by PWR-BTTN..................: [Instant-Off]
    PME Event Wake Up.....................: [Enabled]
    Power On by Ring......................: [Disabled]
    Resume by Alarm.......................: [Disabled]
    HPET Support..........................: [Enabled]
    HPET Mode.............................: [64-bit mode]
    Power On By Mouse.....................: [Double Click]
    Power On By Keyboard..................: [Disabled]
    AC Back Function......................: [Soft-Off]
    ******** PnP/PCI Configurations ********
    Resources Controlled By...............: [Auto]
    PCI Latency Timer (CLK)...............: [32]
    PC1 IRQ Assignment....................: [Auto]
    PC2 IRQ Assignment....................: [Auto]
    *********** PC Health status ***********
    Reset Case Open Status................: [Disabled]
    CPU Warning Temperature...............: [80C/176F]
    CPU FAN Fail Warning..................: [Disabled]
    SYSTEM FAN2 Fail Warning..............: [Disabled]
    POWER FAN Fail Warning................: [Disabled]
    SYSTEM FAN1 Fail Warning..............: [Disabled]
    CPU Smart FAN Control.................: [Disabled]
    Looks like it's gonna' need some more juice! How much? Jim I'm gonna' wait for your call on that (and any other adjustments)... :)
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  2. #422
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    First thing is to change Performance Enhance = Turbo to Standard.

    This means that you will need to manually set tRD and possibly tRFC.

    Set System Memory Multiplier = 2.00D for 2 x 422 = 844MHz.

    Set the primary memory timings to 5-5-5-18 for now and dram voltage = 2.16 - 2.22

    Set tRD = 11 for both memory channels; you might be able to lower this one or two clicks later on.

    You can safely set Cpu PLL = 1.59 or 1.61

    With 1.35000 cpu vcore and LLC enabled, you can safely set VTT (Cpu Termination) to 1.28; up to 1.32 shouldn't hurt your cpu for short term testing.

    You most certainly will need to increase MCH Core, probably to the 1.24 to 1.28 range; up to 1.36 is safe but probably not needed.

    All of these possible settings don't even begin to deal with clock skews or GTL reference settings.

    Changing and testing one thing at a time will take forever.
    This would be my best SWAG for a starting point:
    • System Memory Multiplier = 2.00D
    • Performance Enhance = Standard
    • primary memory timings to 5-5-5-18
    • tRD = 11 for both memory channels
    • tRFC = 64
    • Cpu PLL = 1.61
    • VTT = 1.30
    • MCH Core = 1.26

    Absolutely do not set Cpu PLL or VTT to AUTO!!!

    Before you try any of these changes, save a copy of your current bios to a FAT formatted floppy or usb drive.
    If you "lose" your bios, it's possible that your backup bios chip might not save you.
    Keep your FAT formatted disk installed in your system; I've seen the dreaded "searching for a copy of your bios" message and this is the last thing that you want to see.

    Have I scared you? GOOD!!!
    It's remotely possible to "lose" your bios and buying a pre-flashed bios chip requires soldering the new chip to your motherboard.

    Did you ever test with higher cpu core voltage and LLC disabled to see how this affects core temperatures?
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  3. #423
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Your advice is always greatly appreciated Jim!

    I haven't tested with higher cpu core voltage and LLC disabled yet, would you recommend I do that first?

    Also, do you think I should re-run at stock settings and do a RealTemp sensor test to see if I have any 'stuck' sensors?
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  4. #424
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Did you notice your recent HWiNFO display for each of the Core #X Thermal Throttling entries where it shows YES in the Maximum and Average columns?

    Reread the RealTemp Sensor Test documentation so that you understand value of the test.
    All of our cores are stuck, at least at the low end of the scale. With my C2D E6300 (R0) cpu, the lowest core 0 reading was 40o(C) and core 1's lowest reading was 35o(C) at stock and with all o/c settings. The RealTemp sensor test is useful, but it looks like your cpu is throttling near the 85o mark with your TjMax modified display.

    I would go back to your 3.80GHz stable setup and and find a stable setup with LLC disabled with the lowest stable cpu core voltage which will naturally be higher than the LLC enabled cpu settings. Then you can compare the difference in maximum core temperatures for LinX and/or a 30 minute or longer Prime95 Small FFT test. On my system I've found that while running the Prime95 Blend test, the small FFT tests (less than ~128K) average about 4o(C) higher than the larger FFT tests. The most meaningful results will be with the hotter running tests.

    I've read about some users that are sometimes able to lower some of their cpu related voltage settings with the "optimal" modified MCH and/or Cpu Reference settings. I can't give you specific advice as to what reference values might help you with better stability and/or lower voltages and temperatures.

    I did post earlier that it appears that quad core MCH (and maybe Cpu) reference volt settings that are around 70% of stock 1.20 VTT setting can sometimes improve stability and might help lower cpu temperatures with lower settings. There is always the higher end AIO water cooling setups that cost ~$120 or more and you would probably lower core temperatures by 5o - 7o(C).
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  5. #425
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    As you were typing that I loaded the stock Xeon settings and ran the sensor test and the system froze at the end of the test (I hope this isn't a sign of CPU degradation, but only time will tell). I have since read over the documentation and see that the test isn't really helpful at this moment.

    I have now re-loaded my 3.8GHz settings with LLC disabled but kept vcore the same (as a kind of null hypothesis that it should therefore fail).

    I'm about to run LinX to see how it copes, results to follow...
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  6. #426
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Thumbs up Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Well it certainly liked that LinX test much better!

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-linx-llc-success-3-8-jpg

    (TjMax = 85C)

    The GFlops scores are much better than those from the test I ran with LLC enabled (Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock)

    Edit: Oh and the temps are way better too! :)

    Do you think that it's ok to go ahead and run prime95 blend overnight later on?
    Last edited by lukevega; 08-08-2014 at 09:41 PM. Reason: Temps
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  7. #427
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Exclamation Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    I gave prime95 blend a go but worker 2 failed after only 2 mins!:

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-8-hour-prime95-blend-fail-3-80-jpg

    (TjMax = 85C)

    Temps look good so I'm guessing the vcore was too low...?

    Do I need to increase VTT as well as vcore? Or am I better testing with the settings you posted earlier?
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  8. #428
    SmOgER is offline Junior Member
    Join Date
    Jun 2014
    Location
    Lithuania
    Posts
    55

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Look at your last CPU-Z screen. You lowered your vcore from 1.328v to 1.264v, so don't expect it to be stable :P

    If you disabled LLC then you need to increase vcore to compensate for the vdrop.

  9. #429
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Smoger, although worker 2 failed, the others continued so that vcore was under load, I kept vcore in BIOS the same...
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  10. #430
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Smile Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Ok, going it alone until Jim returns!

    Increased CPU vcore to 1.37500V
    Increased CPU Termination to 1.320V

    All other settings kept the same:

    Code:
    ***************************************
    ***************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F11d
    ***************************************
    ***************************************
    ******************************
    MB Intelligent Tweaker(M.I.T.)
    ******************************
    Robust Graphics Booster ..............: [Auto]
    CPU Clock Ratio ......................: [9X]
    x Fine CPU Clock Ratio................: [+0.5]
    CPU Frequency ........................: 3.80GHz( 400x9.5)
    ********** Clock Chip Control ********
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [400]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    >>>>> Advanced Clock Control..........: [Press Enter]
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    ******** DRAM Performance Control ********
    Performance Enhance...................: [Turbo]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [Auto]
    Memory Frequency(Mhz).....800.........: 912
    DRAM Timing Selectable (SPD)..........: [Manual]
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [Auto]
    x tRCD ...........................5...: [Auto]
    x tRP.............................5...: [Auto]
    x tRAS...........................18...: [Auto]
    >>>>> Advanced Timing Control.........: [Press Enter]
    x tRRD............................3...: [Auto]
    x tWTR............................3...: [Auto]
    x tWR.............................6...: [Auto]
    x tRFC...........................52...: [Auto]
    x tRTP............................3...: [Auto]
    x Command Rate (CMD) .............0...: [Auto]
    >>>>> Channel A Timing Settings.......: [Press Enter]
    x Static tRead Value.............8...: [Auto]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    >>>>> Channel A Driving Settings......: [Press Enter]
    x Driving Strength Profile............: [Auto]
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    >>>>> Channel B Timing Settings.......: [Press Enter]
    x Static tRead Value.............8...: [Auto]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    >>>>> Channel B Driving Settings......: [Press Enter]
    x Driving Strength Profile............: [Auto]
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    ****** Motherboard Voltage Control ******
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Disabled]
    CPU Vcore..............1.23750V.......: [1.37500V]
    CPU Termination........1.200V.........: [1.320V]
    CPU PLL................1.500V.........: [1.570V]
    CPU Reference..........0.760V.........: [Auto]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.200V]
    MCH Reference..........0.760V.........: [Auto]
    MCH/DRAM Reference.....0.900V.........: [Auto]
    ICH I/O................1.500V.........: [Auto]
    ICH Core...............1.100V.........: [Auto]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.100V]
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    Quick Boot............................: [Disabled]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [Disabled]
    Boot Up Floppy Seek...................: [Disabled]
    Boot Up Num-Lock......................: [Off]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Disabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Bachup BIOS Image to HDD..............: [Disabled]
    Init Display First....................: [PEG]
    ******** Integrated Peripherals ********
    ICH SATA Control Mode.................: [AHCI]
    SATA Port0-3 Native Mode..............: [Enabled]
    Azalia Codec..........................: [Auto]
    Onboard H/W 1394......................: [Enabled]
    Onboard H/W Lan1......................: [Enabled]
    Onboard H/W Lan2......................: [Enabled]
    Green LAN.............................: [Disabled]
    Smart LAN1............................: [Press Enter]
    Smart LAN2............................: [Press Enter]
    Onboard LAN1 BOOT ROM.................: [Disabled]
    Onboard LAN2 BOOT ROM.................: [Disabled]
    Onboard SATA/IDE Device...............: [Enabled]
    Onboard SATA/IDE Ctrl Mode............: [AHCI]
    Onboard Serial Port 1.................: [3F8/IRQ4]
    Onboard Parallel Port.................: [378/IRQ7]
    Parallel Port Mode....................: [SPP]
    xECP Mode Use DMA.....................:  3
    USB Controllers.......................: [Enabled]
    USB Keyboard Function.................: [Disabled]
    USB Mouse Function....................: [Disabled]
    USB Storage Function..................: [Enabled]
    ******** Power Management Setup ********
    ACPI Suspend Type.....................: [S3(STR)]
    USB Device Wake-Up From S3............: [Enabled]
    Soft-Off by PWR-BTTN..................: [Instant-Off]
    PME Event Wake Up.....................: [Enabled]
    Power On by Ring......................: [Disabled]
    Resume by Alarm.......................: [Disabled]
    HPET Support..........................: [Enabled]
    HPET Mode.............................: [64-bit mode]
    Power On By Mouse.....................: [Double Click]
    Power On By Keyboard..................: [Disabled]
    AC Back Function......................: [Soft-Off]
    ******** PnP/PCI Configurations ********
    Resources Controlled By...............: [Auto]
    PCI Latency Timer (CLK)...............: [32]
    PC1 IRQ Assignment....................: [Auto]
    PC2 IRQ Assignment....................: [Auto]
    *********** PC Health status ***********
    Reset Case Open Status................: [Disabled]
    CPU Warning Temperature...............: [80C/176F]
    CPU FAN Fail Warning..................: [Disabled]
    SYSTEM FAN2 Fail Warning..............: [Disabled]
    POWER FAN Fail Warning................: [Disabled]
    SYSTEM FAN1 Fail Warning..............: [Disabled]
    CPU Smart FAN Control.................: [Disabled]
    Booted into Windows fine and passed 5 loops of LinX with decent temperatures:

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-linx-llc-success-2-3-8-jpg

    (TjMax = 85C)

    About to run prime95 blend to see if it passes the 2 minute mark!
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

Page 43 of 74 FirstFirst ... 33414243444553 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 20 users browsing this thread. (0 members and 20 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •