Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 57 of 74 FirstFirst ... 747555657585967 ... LastLast
Results 561 to 570 of 737

Thread: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock




  1. #561
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Another fail this time 408MHz, vcore = 1.35, VTT = 1.30 (only changes from last post):



    I'm starting to think 3.8 is as good as it's gonna get...

    Edit:
    Last edited by lukevega; 09-18-2014 at 04:55 AM.
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  2. #562
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Angry Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    This time I changed the memory strap from Auto to 2.00D in addition to the above changes.

    Still failed after 17 minutes :(

    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  3. #563
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    I'm having numerous issues when overclocking higher than 3.60GHz.

    This is a list of things that I'm going to try:
    1. custom Large FFT test using FFT sizes 128K to 4096K with Run FFT's in-place disabled and Memory to use (in MB) = 1600
      note: this test is similar to running the standard Blend test without testing FFT sizes less than 128K
    2. boot using IDE mode
    3. test with 8GB of OCZ Reaper PC2-8500 memory
    4. test with 8GB of Mushkin PC2-8500 Blackline memory
    5. test after flashing with the last standard F10 bios instead of the current F11d mod bios
    6. test with my Q9650 using my P35-DS4 rev:2.0 motherboard

    I expect that this is going to take a while.

    I don't have any other suggestions.
    Last edited by profJim; 09-19-2014 at 06:23 PM. Reason: correction for custom test FFT sizes
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  4. #564
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Two 3.825GHz test failures to report:
    1. custom Large FFT test
    2. booting with IDE mode instead of RAID mode

    The next test will replace the HyperX T1 memory with OCZ Reaper memory.

    I've added a sixth test to the list; Q9650 + P35-DS4 with 8GB or memory.

    Editorial comment: my current 3.50GHz is good, but I want an even gooder 3.8GHz setup.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  5. #565
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    I don't recall if I posted this link earlier in this thread:

    This is a must read if you want or need to tweak reference volt settings.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  6. #566
    SmOgER is offline Junior Member
    Join Date
    Jun 2014
    Location
    Lithuania
    Posts
    55

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Dunno if it's just my current system (temporarily using Q6600), but I just can't get EP45T-UD3R stable above 450FSB no matter what I do. It doesn't POST above 465FSB and randomly freezes in windows at 452-465Mhz range. it's much better than my old P5QC, but I'am just sick and tired being hunted of those issues when not a single logical solution works :D
    Increasing-decreasing voltages/tweaking GTLs/adjusting clock skews/loosening timings and tRD/underclocking RAM. None of it helps.
    Last edited by SmOgER; 09-20-2014 at 03:06 AM.

  7. #567
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    SmOgER,

    As I recall, you posted only one screen-shot a while back with some details about your EP45T setup.
    With over 560 posts in this thread so far, I can't (and won't) go looking for detailed information about your system.

    My main question involves your memory kit, is it on Corsair's compatibility list for your motherboard or in the EP45T-UD3P QVL list?

    Which bios version are you using?

    Have you checked for a modded or beta bios in the GIGABYTE Modified Bios or http://forums.tweaktown.com/gigabyte...beta-bios.html threads in the TT Gigabyte forum?

    In the Upgrading RAM in EP45T-UD3P to 2x4GB DDR3-1600 thread, the OP had difficulty getting a compatible memory kit from G.Skill.

    If you use the forum's Advanced Search feature, you can search using EP45T Keyword and the Search Titles Only option to get a list of 163 threads, where the most useful threads will have at least 10 - 30 or more replies.
    ~~~~~~~~


    In the recent http://forums.tweaktown.com/overcloc...-settings.html thread I posted the following:


    From a web search, here is a screen-shot using EP45T-Extreme, Q9650 @ 4.617GHz and 4GB of memory at 1640MHz.



    Check out the EXTREME screen-shots by dinos22: [Team.AU]XFire HD4870X2, E8600, Gigabyte EP45T-EXTREME, Corsair DDR3 + Skulltrail fun
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  8. #568
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Could it be that our motherboards are too old and tired?

  9. #569
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Question Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Ok, I'm not sure if I've been doing this properly but I tried to follow the guide so hopefully I am...

    I've been adjusting the MCH Reference to see what differences it makes.

    I loaded up my previously stable (without EIST and C1E enabled) 3.8GHz LLC enabled settings and firstly enabled EIST and C1E. Then I set MCH Reference to Auto, set VTT from 1.26V to 1.20V, set MCH Reference at 0.64 and then increased VTT back to 1.26V which then changes MCH Reference to 0.678 in BIOS. This configuration did not POST.

    I repeated this for MCH Reference values of:
    0.650 (0.688 at VTT 1.26) - Failed to POST
    0.660 (0.698 at VTT 1.26) - BSOD after POST
    0.680 (0.718 at VTT 1.26) - Froze when running HWiNFO and loading CPU-Z
    0.700 (0.738 at VTT 1.26) - Loaded into Windows, currently running HWiNFO, CPU-Z, MemSet and RealTemp (ET6 screenshot taken) and about to run Large FTTs to see if it copes at all

    Here are the full current settings I am about to test:

    Code:
    ***************************************
    ***************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F11d
    ***************************************
    ***************************************
    ******************************
    MB Intelligent Tweaker(M.I.T.)
    ******************************
    Robust Graphics Booster ..............: [Auto]
    CPU Clock Ratio ......................: [9X]
    x Fine CPU Clock Ratio................: [+0.5]
    CPU Frequency ........................: 3.80GHz( 400x9.5)
    ********** Clock Chip Control ********
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    [B]x CPU Host Frequency(Mhz).............: [400]/B]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    >>>>> Advanced Clock Control..........: [Press Enter]
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    ******** DRAM Performance Control ********
    Performance Enhance...................: [Turbo]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [Auto]
    Memory Frequency(Mhz).....800.........: 960
    DRAM Timing Selectable (SPD)..........: [Manual]
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [Auto]
    x tRCD ...........................5...: [Auto]
    x tRP.............................5...: [Auto]
    x tRAS...........................18...: [Auto]
    >>>>> Advanced Timing Control.........: [Press Enter]
    x tRRD............................3...: [Auto]
    x tWTR............................3...: [Auto]
    x tWR.............................6...: [Auto]
    x tRFC...........................52...: [Auto]
    x tRTP............................3...: [Auto]
    x Command Rate (CMD) .............0...: [Auto]
    >>>>> Channel A Timing Settings.......: [Press Enter]
    x Static tRead Value.............8...: [Auto]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    x Trd2rd(Different Rank)..........8...: Auto
    x Twr2wr(Different Rank)..........8...: Auto
    x Twr2rd(Different Rank)..........7...: Auto
    x Trd2wr(Same/Diff Rank)..........9...: Auto
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    >>>>> Channel A Driving Settings......: [Press Enter]
    x Driving Strength Profile............: [Auto]
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    >>>>> Channel B Timing Settings.......: [Press Enter]
    x Static tRead Value.............8...: [Auto]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    x Trd2rd(Different Rank)..........8...: Auto
    x Twr2wr(Different Rank)..........8...: Auto
    x Twr2rd(Different Rank)..........7...: Auto
    x Trd2wr(Same/Diff Rank)..........9...: Auto
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    >>>>> Channel B Driving Settings......: [Press Enter]
    x Driving Strength Profile............: [Auto]
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    ****** Motherboard Voltage Control ******
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Enabled]
    CPU Vcore..............1.23750V.......: [1.35000V]
    CPU Termination........1.200V.........: [1.260V]
    CPU PLL................1.500V.........: [1.570V]
    CPU Reference..........0.760V.........: [Auto]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.200V]
    MCH Reference..........0.760V.........: [0.738V] When set to 0.700V
    MCH/DRAM Reference.....0.900V.........: [Auto]
    ICH I/O................1.500V.........: [Auto]
    ICH Core...............1.100V.........: [Auto]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.100V]
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    Quick Boot............................: [Disabled]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [Disabled]
    Boot Up Floppy Seek...................: [Disabled]
    Boot Up Num-Lock......................: [Off]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Disabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Enabled]
    C2/C2E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Enabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Bachup BIOS Image to HDD..............: [Disabled]
    Init Display First....................: [PEG]
    ******** Integrated Peripherals ********
    ICH SATA Control Mode.................: [AHCI]
    SATA Port0-3 Native Mode..............: [Enabled]
    Azalia Codec..........................: [Auto]
    Onboard H/W 1394......................: [Enabled]
    Onboard H/W Lan1......................: [Enabled]
    Onboard H/W Lan2......................: [Enabled]
    Green LAN.............................: [Disabled]
    Smart LAN1............................: [Press Enter]
    Smart LAN2............................: [Press Enter]
    Onboard LAN1 BOOT ROM.................: [Disabled]
    Onboard LAN2 BOOT ROM.................: [Disabled]
    Onboard SATA/IDE Device...............: [Enabled]
    Onboard SATA/IDE Ctrl Mode............: [AHCI]
    Onboard Serial Port 1.................: [3F8/IRQ4]
    Onboard Parallel Port.................: [378/IRQ7]
    Parallel Port Mode....................: [SPP]
    xECP Mode Use DMA.....................:  3
    USB Controllers.......................: [Enabled]
    USB Keyboard Function.................: [Disabled]
    USB Mouse Function....................: [Disabled]
    USB Storage Function..................: [Enabled]
    ******** Power Management Setup ********
    ACPI Suspend Type.....................: [S3(STR)]
    USB Device Wake-Up From S3............: [Enabled]
    Soft-Off by PWR-BTTN..................: [Instant-Off]
    PME Event Wake Up.....................: [Enabled]
    Power On by Ring......................: [Disabled]
    Resume by Alarm.......................: [Disabled]
    HPET Support..........................: [Enabled]
    HPET Mode.............................: [64-bit mode]
    Power On By Mouse.....................: [Double Click]
    Power On By Keyboard..................: [Disabled]
    AC Back Function......................: [Soft-Off]
    ******** PnP/PCI Configurations ********
    Resources Controlled By...............: [Auto]
    PCI Latency Timer (CLK)...............: [32]
    PC1 IRQ Assignment....................: [Auto]
    PC2 IRQ Assignment....................: [Auto]
    *********** PC Health status ***********
    Reset Case Open Status................: [Disabled]
    CPU Warning Temperature...............: [80C/176F]
    CPU FAN Fail Warning..................: [Disabled]
    SYSTEM FAN2 Fail Warning..............: [Disabled]
    POWER FAN Fail Warning................: [Disabled]
    SYSTEM FAN1 Fail Warning..............: [Disabled]
    CPU Smart FAN Control.................: [Disabled]
    Results to follow
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  10. #570
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    With dual core processors, MCH Ref usually needs to be set lower than the default 0.760 setting (with VTT = 1.20).
    With quad core processors, MCH Ref usually needs to be set higher than the default 0.760 setting (with VTT = 1.20).

    note: usually in this case means most of the time, i.e. about 95% of the time.

    At the time Lsdme's post was written, quad core use was a much smaller segment compared to dual core processors.

    Otherwise you did it right.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


Page 57 of 74 FirstFirst ... 747555657585967 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 18 users browsing this thread. (0 members and 18 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •