Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 6 of 74 FirstFirst ... 456781656 ... LastLast
Results 51 to 60 of 737

Thread: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock




  1. #51
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Cool Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Hold the phone!

    Just changed the settings and everything worked!

    New BIOS Settings:

    Code:
    Motherboard: Gigabyte GA-P35-DS3L Rev 2.0: BIOS Version: F9C
    CPU: Intel Xeon X5460
    RAM: Crucial Model: Ballistix Sport DDR2 800 Part#: BLS2CP2G2D80EBS1S00CEU (http://uk.crucial.com/ProductDisplay?urlRequestType=Base&catalogId=10153&categoryId=17510&productId=10743&urlLangId=-1&langId=-1&top_category=&parent_category_rn=17510&storeId=10153)
    Power Supply Unit: Corsair HX520W
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio __________________ [9]
    Fine Clock Ratio __________________[0.5]
    CPU Host Clock Control____________[Enabled]
    CPU Host Frequency (MHz)_________[400]
    PCI Express Frequency (Mhz)________[101]
    C.I.A. 2__________________________[Disabled]
    Performance Enhance = ____________[Standard]
    System Memory Multiplier (SPD)_____[2.00]
    DRAM Timing Selectable_____ SPD ___[Manual]
     
    CAS Latency Time_______________5_[5]
    Dram RAS# to CAS# Delay________5_[5]
    Dram RAS# Precharge Delay_______5_[5]
    Precharge Delay (tRAS)__________18_[18]
     
    ACT to ACT Delay (tRRD)_________3_[Auto]
    Rank Write to READ Delay________3_[Auto]
    Write to Precharge Delay_________6_[Auto]
    Refresh to ACT Delay____________52_[Auto]
    Read to Precharge Delay__________3_[Auto]
    Static tRead Value_______________8_[8]
    Static tRead Phase Adjust_________0_[Auto]
     
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.200V]
    PCI-E OverVoltage Control_ [+0.1V]
    FSB OverVoltage Control___ [+0.1V]
    (G)MCH OverVoltage Control [+0.1V]
    CPU Voltage Control_______ [1.38750V]
    Normal CPU Vcore________1.23750V
    
    Hard Disk Boot Priority.....: [Press Enter]
    1.	Kingston SV300S37A240G
    2.	ST3500320AS
    3.	ST3500320AS
    First Boot Device...........: [Hard Disk]
    Second Boot Device......: [CDROM]
    Third Boot Device.........: [Disabled]
    Password Check...........: [Setup]
    HDD S.M.A.R.T. Capability......: [Enabled]
    Limit CPUID Max. to 3.........: [Disabled]
    No-Execute Memory Protect.........: [Disabled]
    CPU Enhanced Halt (C1E)...........: [Disabled]
    CPU Thermal Monitor 2(TM2) ......: [Enabled]
    CPU EIST Function...............: [Disabled]
    Virtualization Technology..........: [Disabled]
    Full Screen LOGO Show.........: [Disabled]
    Init Display First............: [PEG]
    
    SATA AHCI Mode.........: [AHCI]
    SATA Port0-1 Native Mode.........: [Enabled]
    USB Controller...........: [Enabled]
    USB 2.0 Controller............: [Enabled]
    USB Keyboard Support............: [Disabled]
    USB Mouse Support..........: [Disabled]
    Legacy USB Storage Detect…….[Disabled]
    Azalia Codec............: [Auto]
    Onboard H/W LAN............: [Enabled]
    SMART LAN.................: [Press Enter]
    Onboard LAN Boot ROM.......: [Disabled]
    Onboard IDE Controller........: [Enabled]
    Onboard Serial Port 1..........: [3F8/IRQ4]
    Onboard Parallel Serial Port...: [378/IRQ7]
    Parallel Port Mode................: [SPP]
    
    
    ACP1 Suspend Type........: [S1(POS)]
    Soft-Off by PWR-BTTN....: [Delay 4 Sec.]
    PME Event Wake Up.......: [Disabled]
    Power On by Ring.......: [Disabled]
    Resume by Alarm......: [Disabled]
    HPET Support..........: [Enabled]
    HPET Mode.............: [64-bit mode]
    Power On by Mouse.............: [Double Click]
    Power On by Keyboard.........: [Disabled]
    AC Back Function..................: [Soft-Off]
    
    
    PCI1 IRQ Assignment.............: [Auto]
    PCI2 IRQ Assignment.............: [Auto]
    PCI3  IRQ Assignment............: [Auto]
    
    Reset Case Open Status...........: [Disabled]
    CPU Warning Temperature.......: [80°C/176°F]
    CPU FAN Fail Warning...............: [Disabled]
    SYSTEM FAN2 Fail Warning.......: [Disabled]
    POWER FAN Fail Warning..........: [Disabled]
    SYSTEM FAN1 Fail Warning.......: [Disabled]
    CPU Smart FAN Control.............: [Disabled]
    New AS SSD Score:

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-ssd-png

    Thanks for the help and advice!

    Time to increase the overclock? Or should I clean the cooler first?
    Last edited by lukevega; 05-11-2014 at 05:53 AM. Reason: Settings view was wrong
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  2. #52
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Thumbs up Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    and the progress continues!

    Updated the firmware for my SSD and the performance has increased AND turns out I saved the clips from 7 years ago so I should be able to mount the fan and move the HDDs as you suggest :D

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-photo-1-jpg

    Life is good
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  3. #53
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Wink Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    So... While I was on a roll I decided to re-arrange my components as per your recommendations:

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-cable-management-jpg

    Am I right in thinking the next step is to try 3.905GHz again (9.5 x 411 FSB) with (G)MCH OverVoltage Control [+0.15V] whilst monitoring everything with HWiNFO64 with Sensor Logging enabled with a 2 second interval?

    Good afternoon, good evening and goodnight!

    All the best,

    Lukevega
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  4. #54
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Just a screenshot to check that I'm all ready to go?

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-ready-jpg

    By the way - should I check performance with the PCI SATA 3 card again? Might that be diffferent with AHCI now working?
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  5. #55
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Exclamation Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Good morning!

    I hope I got this right so that we can make some progress...

    I changed the (G)MCH OverVoltage Control to +0.2V as +0.15 was not an option.

    I kept everything else the same:

    Code:
    Motherboard: Gigabyte GA-P35-DS3L Rev 2.0: BIOS Version: F9C
    CPU: Intel Xeon X5460
    RAM: Crucial Model: Ballistix Sport DDR2 800 Part#: BLS2CP2G2D80EBS1S00CEU (http://uk.crucial.com/ProductDisplay?urlRequestType=Base&catalogId=10153&categoryId=17510&productId=10743&urlLangId=-1&langId=-1&top_category=&parent_category_rn=17510&storeId=10153)
    Power Supply Unit: Corsair HX520W
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio __________________ [9]
    Fine Clock Ratio __________________[0.5]
    CPU Host Clock Control____________[Enabled]
    CPU Host Frequency (MHz)_________[411]
    PCI Express Frequency (Mhz)________[101]
    C.I.A. 2__________________________[Disabled]
    Performance Enhance = ____________[Standard]
    System Memory Multiplier (SPD)_____[2.00]
    DRAM Timing Selectable_____ SPD ___[Manual]
     
    CAS Latency Time_______________5_[5]
    Dram RAS# to CAS# Delay________5_[5]
    Dram RAS# Precharge Delay_______5_[5]
    Precharge Delay (tRAS)__________18_[18]
     
    ACT to ACT Delay (tRRD)_________3_[Auto]
    Rank Write to READ Delay________3_[Auto]
    Write to Precharge Delay_________6_[Auto]
    Refresh to ACT Delay____________52_[Auto]
    Read to Precharge Delay__________3_[Auto]
    Static tRead Value_______________8_[8]
    Static tRead Phase Adjust_________0_[Auto]
     
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.200V]
    PCI-E OverVoltage Control_ [+0.1V]
    FSB OverVoltage Control___ [+0.1V]
    (G)MCH OverVoltage Control [+0.2V]
    CPU Voltage Control_______ [1.38750V]
    Normal CPU Vcore________1.23750V
    
    Hard Disk Boot Priority.....: [Press Enter]
    1.	Kingston SV300S37A240G
    2.	ST3500320AS
    3.	ST3500320AS
    First Boot Device...........: [Hard Disk]
    Second Boot Device......: [CDROM]
    Third Boot Device.........: [Disabled]
    Password Check...........: [Setup]
    HDD S.M.A.R.T. Capability......: [Enabled]
    Limit CPUID Max. to 3.........: [Disabled]
    No-Execute Memory Protect.........: [Disabled]
    CPU Enhanced Halt (C1E)...........: [Disabled]
    CPU Thermal Monitor 2(TM2) ......: [Enabled]
    CPU EIST Function...............: [Disabled]
    Virtualization Technology..........: [Disabled]
    Full Screen LOGO Show.........: [Disabled]
    Init Display First............: [PEG]
    
    SATA AHCI Mode.........: [AHCI]
    SATA Port0-1 Native Mode.........: [Enabled]
    USB Controller...........: [Enabled]
    USB 2.0 Controller............: [Enabled]
    USB Keyboard Support............: [Disabled]
    USB Mouse Support..........: [Disabled]
    Legacy USB Storage Detect…….[Disabled]
    Azalia Codec............: [Auto]
    Onboard H/W LAN............: [Enabled]
    SMART LAN.................: [Press Enter]
    Onboard LAN Boot ROM.......: [Disabled]
    Onboard IDE Controller........: [Enabled]
    Onboard Serial Port 1..........: [3F8/IRQ4]
    Onboard Parallel Serial Port...: [378/IRQ7]
    Parallel Port Mode................: [SPP]
    
    
    ACP1 Suspend Type........: [S1(POS)]
    Soft-Off by PWR-BTTN....: [Delay 4 Sec.]
    PME Event Wake Up.......: [Disabled]
    Power On by Ring.......: [Disabled]
    Resume by Alarm......: [Disabled]
    HPET Support..........: [Enabled]
    HPET Mode.............: [64-bit mode]
    Power On by Mouse.............: [Double Click]
    Power On by Keyboard.........: [Disabled]
    AC Back Function..................: [Soft-Off]
    
    
    PCI1 IRQ Assignment.............: [Auto]
    PCI2 IRQ Assignment.............: [Auto]
    PCI3  IRQ Assignment............: [Auto]
    
    Reset Case Open Status...........: [Disabled]
    CPU Warning Temperature.......: [80°C/176°F]
    CPU FAN Fail Warning...............: [Disabled]
    SYSTEM FAN2 Fail Warning.......: [Disabled]
    POWER FAN Fail Warning..........: [Disabled]
    SYSTEM FAN1 Fail Warning.......: [Disabled]
    CPU Smart FAN Control.............: [Disabled]
    Ran Prime95 with hopefully the right background apps running:

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-3-9test-jpg

    Core 2 failed 1 minute in "FATAL ERROR: Rounding was 0.5, expected less than 0.4".

    I hope I did that right and that it helps!
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  6. #56
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Exclamation Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Also, since I'm not allowed more than 1 attachment per post...

    Here is the file I logged using HWiNFO:

    (I had to save it as a ZIP file as it wouldn't accept .CSV.
    Attached Files Attached Files
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  7. #57
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Re-checked with the Startech PCI Express SATA Controller and got worse results from the AS SSD Benchmark test so you were right (not that I ever doubted you):

    Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock-startech-ahci-png

    Correct me if I'm wrong but is the next stage to increase the vcore whilst maintaining the MCH at +0.2V?
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  8. #58
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    It's good to see that you're making progress with your AS-SSD benchmark results.
    I'll reply to your most recent posts just after I've completed this post.

    Sata3 add-in card results with your new and improved firmware, drivers and settings?

    If won't hurt to see how it performs now, but I'll be surprized if there is much difference compared with your current msAHCI driver which will only be used by your motherboard's Intel sata2 ports. Your first AS_SSD screenshot has the name of the driver that is used by your sata3 add-in card.

    As I see it, your primary problem centers around your cpu core temperatures that are much higher than normal even when you aren't doing any stress testing. Another possible issue is that your Xeon cpu might not be able to overclock as high as "normal" when you're using the 771 mod and/or an inexpensive, lower end board. My board has a few additional features and is a step up, but mine is far from an enthusiast level motherboard. A board like the EP45-UD3P is an outstanding overclocking board but the price for one in the used or overseas markets is probably absurdly high.

    Right now my core temperatures are 55o - 61o with my 4.0GHz overclock running the Prime95 Large FFT stress test and my cpu core voltage setting is 1.39375 volts. This test has been running for just over 4 hours and HWiNFO reports that maximum cpu core temperatures during this test are from 60o - 66o(C). My typical cpu core temps when my system is idle are jn the mid to upper 20o(C). I've noticed on my system that the current core temps and maximum core temps reported by HWiNFO are 3o - 5o(C) lower than the same readings in CoreTemp.

    Your new case fan setup should help improve cpu and grafic's temperatures, I think that your system will need more help with lowering cpu temperatures. Try to route the cables and wires in your case so that they interfere as little as possible with the airflow inside your case.

    How much unused free space is on your ssd?
    How much space is in use on your ssd?

    I have completed my IBT and LinX testing at 4.0GHz with lowered cpu voltage and I've completed separate Prime95 Blend and Small FFT tests (8 hours for each Prime95 test) and my last Prime95 Large FFT test is progressing nicely. I found a minor problem with the water pump/cooling block and my cpu core voltages don't vary as much.

    If you get any errors, freezes or BSODs while testing, note the time of the failure and then check the HWiNFO temperature and voltage logs for the same time period.

    I'm including my current 4.0GHz voltage settings, but keep in mind that I'm running 8GB of higher performance memory compared with your 4GB ram setup. My settings might not work well in another system that is using identical hardware as my setup.

    Code:
    CPU = Q9650 Core2Quad -- http://ark.intel.com/products/35428/...333-MHz-FSB%29
    Motherboard = P35-DS4 rev: 2.0
    BIOS Version = F14 
    Ram = 4 x 2GB OCZ Reaper OCZ2RPR10664GK, DDR2-1066, cas5, 2.10V - 2.20V
    
    
    ____________________________________________________
    ____________________________________________________
    Robust Graphics Booster___________ [Auto]___________
    CPU Clock Ratio ___________________[9x] ____________
    Fine Clock Ratio __________________[0.0]
    CPU Frequency _____________________[4.005GHz (445x9)]
    CPU Host Clock Control_____________[Enabled]________
    CPU Host Frequency (MHz)__________ [445] ___________
    PCI Express Frequency (Mhz)_______ [101]____________
    Performance Enhance________________[Turbo]__________
    System Memory Multiplier (SPD)_____[2.00]___________
    Memory Frequency(MHz)____[800]_____[890]____________
    DRAM Timing Selectable___(SPD)_____[Manual]_________
    
    ********** Standard Timing Control ************_____
    CAS Latency Time________________5__[5]______________
    Dram RAS# to CAS# Delay_________5__[4]______________
    Dram RAS# Precharge Delay_______5__[4]______________
    Precharge Delay (tRAS)__________5__[12]_____________
    
    ********** Advanced Timing Control ************_____
    ACT to ACT Delay (tRRD)________ 3__[Auto]___________
    Rank Write to READ Delay_______ 3__[Auto]___________
    Write to Precharge Delay_______ 6__[Auto]___________
    Refresh to ACT Delay___________52__[ 50 ]___________
    Read to Precharge Delay________ 3__[Auto]___________
    Static tRead Value_____________ 7__[  8 ]___________
    Static tRead Phase Adjust_______0__[Auto]___________
    ____________________________________________________
    System Voltage Control_____________[Manual]_________
    DDR2 OverVoltage Control___________[+0.35V]__________ (1.80 + 0.35 = 2.15)
    PCI-E OverVoltage Control__________[+0.15V]__________
    FSB OverVoltage Control____________[+0.20V]__________
    (G)MCH OverVoltage Control_________[+0.20V]__________
    Loadline Calibration_______________[ Auto ]
    CPU Voltage Control________________[1.39375V]_______
    Normal CPU Vcore___________________ 1.26350



    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  9. #59
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Re-checked with the Startech PCI Express SATA Controller and got worse results from the AS SSD Benchmark test so you were right (not that I ever doubted you):
    OF COURSE YOU DOUBTED ME and you just had to learn the hard way.
    And I applaud your efforts to learn from first hand experience.
    I seen similar results with these types of controllers in older motherboards and nothing seems to be able to match the native Intel sata ports. My experience with add-in usb3.0 cards is decent but not outstanding and I'm glad that I have them in both of my older systems.

    Right now we don't know how rock solid stable your system is at 3.80GHz.
    When I started overclocking my Q9650 I was able to quickly confirm that my system was fully stable at 3.60GHz due to my past experience overclocking other LGA775 systems and helping lots of others. Going to 3.80GHz was easy too, for the same reason. 4.00GHz took a bit more effort and I didn't run it at this speed because the required voltages were beyond my comfort zone. The former TweakTown guru and administrator recommend o/c'ing Xeon processors, but none of us encouraged others to use inexpensive, lower end motherboards for any type of serious overclocking. One thing I haven't brought up is I'm now using my board's Load Line Calibration (LLC) bios feature to help use lower voltages. I prefer not to use LLC but in some cases it's necessary.

    I bought my P35-DS3L motherboard as an inexpensive backup machine with an E2140 cpu. It overclocks reasonably well with different processors and I was able to overclock the 1.60GHz E2140 cpu 100% to 3.20HGHz where it was stable and I fondly called it my gutless wonder.

    If you want to o/c further, the first thing that I would to is to make sure that your cpu cooler is operating at it's best and then to thoroughly test it at 3.60 - 3.80GHz and you'll have a solid fall back setup if you can't overclock it higher. My approach is to overclock starting with a solid foundation.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  10. #60
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    SSD has 115GB free of 223GB. Next move will be to deep clean the cooler and check the TIM application - which I will provide pictures of before I re-apply. Do you have a reference picture for the amount that should be applied?

    I'll stick at 3.8GHz and try to make sure that it's fully stable before moving on.
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

Page 6 of 74 FirstFirst ... 456781656 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 14 users browsing this thread. (0 members and 14 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •