Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 60 of 74 FirstFirst ... 1050585960616270 ... LastLast
Results 591 to 600 of 737

Thread: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock




  1. #591
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Thumbs up Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Some long-awaited success!

    8 hours of small FTTs passed :D



    Should I change anything before running some 2 hour 3.85 pre-tests?

    Edit:
    Code:
    ***************************************
    ***************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F11d
    ***************************************
    ***************************************
    ******************************
    MB Intelligent Tweaker(M.I.T.)
    ******************************
    Robust Graphics Booster ..............: [Auto]
    CPU Clock Ratio ......................: [9X]
    x Fine CPU Clock Ratio................: [+0.5]
    CPU Frequency ........................: 3.80GHz( 400x9.5)
    ********** Clock Chip Control ********
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [400]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    >>>>> Advanced Clock Control..........: [Press Enter]
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    ******** DRAM Performance Control ********
    Performance Enhance...................: [Turbo]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [Auto]
    Memory Frequency(Mhz).....800.........: 960
    DRAM Timing Selectable (SPD)..........: [Manual]
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [Auto]
    x tRCD ...........................5...: [Auto]
    x tRP.............................5...: [Auto]
    x tRAS...........................18...: [Auto]
    >>>>> Advanced Timing Control.........: [Press Enter]
    x tRRD............................3...: [Auto]
    x tWTR............................3...: [Auto]
    x tWR.............................6...: [Auto]
    x tRFC...........................52...: [Auto]
    x tRTP............................3...: [Auto]
    x Command Rate (CMD) .............0...: [Auto]
    >>>>> Channel A Timing Settings.......: [Press Enter]
    x Static tRead Value.............8...: [Auto]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    x Trd2rd(Different Rank)..........8...: Auto
    x Twr2wr(Different Rank)..........8...: Auto
    x Twr2rd(Different Rank)..........7...: Auto
    x Trd2wr(Same/Diff Rank)..........9...: Auto
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    >>>>> Channel A Driving Settings......: [Press Enter]
    x Driving Strength Profile............: [Auto]
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    >>>>> Channel B Timing Settings.......: [Press Enter]
    x Static tRead Value.............8...: [Auto]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    x Trd2rd(Different Rank)..........8...: Auto
    x Twr2wr(Different Rank)..........8...: Auto
    x Twr2rd(Different Rank)..........7...: Auto
    x Trd2wr(Same/Diff Rank)..........9...: Auto
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    >>>>> Channel B Driving Settings......: [Press Enter]
    x Driving Strength Profile............: [Auto]
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    ****** Motherboard Voltage Control ******
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Enabled]
    CPU Vcore..............1.23750V.......: [1.32500V]
    CPU Termination........1.200V.........: [1.260V]
    CPU PLL................1.500V.........: [1.570V]
    CPU Reference..........0.760V.........: [Auto]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.200V]
    MCH Reference..........0.760V.........: [0.758V] When set to 0.720V
    MCH/DRAM Reference.....0.900V.........: [Auto]
    ICH I/O................1.500V.........: [Auto]
    ICH Core...............1.100V.........: [Auto]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.100V]
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    Quick Boot............................: [Disabled]
    First Boot Device.....................: [USB-HDD]
    Second Boot Device....................: [Hard Disk]
    Third Boot Device.....................: [Disabled]
    Boot Up Floppy Seek...................: [Disabled]
    Boot Up Num-Lock......................: [Off]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Disabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Enabled]
    C2/C2E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Enabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Bachup BIOS Image to HDD..............: [Disabled]
    Init Display First....................: [PEG]
    ******** Integrated Peripherals ********
    ICH SATA Control Mode.................: [AHCI]
    SATA Port0-3 Native Mode..............: [Enabled]
    Azalia Codec..........................: [Auto]
    Onboard H/W 1394......................: [Enabled]
    Onboard H/W Lan1......................: [Enabled]
    Onboard H/W Lan2......................: [Enabled]
    Green LAN.............................: [Disabled]
    Smart LAN1............................: [Press Enter]
    Smart LAN2............................: [Press Enter]
    Onboard LAN1 BOOT ROM.................: [Disabled]
    Onboard LAN2 BOOT ROM.................: [Disabled]
    Onboard SATA/IDE Device...............: [Enabled]
    Onboard SATA/IDE Ctrl Mode............: [AHCI]
    Onboard Serial Port 1.................: [3F8/IRQ4]
    Onboard Parallel Port.................: [378/IRQ7]
    Parallel Port Mode....................: [SPP]
    xECP Mode Use DMA.....................:  3
    USB Controllers.......................: [Enabled]
    USB Keyboard Function.................: [Disabled]
    USB Mouse Function....................: [Disabled]
    USB Storage Function..................: [Enabled]
    ******** Power Management Setup ********
    ACPI Suspend Type.....................: [S3(STR)]
    USB Device Wake-Up From S3............: [Enabled]
    Soft-Off by PWR-BTTN..................: [Instant-Off]
    PME Event Wake Up.....................: [Enabled]
    Power On by Ring......................: [Disabled]
    Resume by Alarm.......................: [Disabled]
    HPET Support..........................: [Enabled]
    HPET Mode.............................: [64-bit mode]
    Power On By Mouse.....................: [Double Click]
    Power On By Keyboard..................: [Disabled]
    AC Back Function......................: [Soft-Off]
    ******** PnP/PCI Configurations ********
    Resources Controlled By...............: [Auto]
    PCI Latency Timer (CLK)...............: [32]
    PC1 IRQ Assignment....................: [Auto]
    PC2 IRQ Assignment....................: [Auto]
    *********** PC Health status ***********
    Reset Case Open Status................: [Disabled]
    CPU Warning Temperature...............: [80C/176F]
    CPU FAN Fail Warning..................: [Disabled]
    SYSTEM FAN2 Fail Warning..............: [Disabled]
    POWER FAN Fail Warning................: [Disabled]
    SYSTEM FAN1 Fail Warning..............: [Disabled]
    CPU Smart FAN Control.................: [Disabled]
    Last edited by lukevega; 09-22-2014 at 06:01 AM. Reason: Added full stable BIOS template
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  2. #592
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Arrow Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Tried running the same settings at 3.85 but no luck:



    I'm going to try raising MCH Core a notch to see if it makes much difference. I hope that's not a step in the wrong direction!
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  3. #593
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Exclamation Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    I think that may have been a poor choice since it failed almost instantaneously:



    Oh well, no harm done!
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  4. #594
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Try raising Cpu PLL from 1.57 to 1.59 volts.
    The highest Cpu PLL setting that I would use is 1.61 volts.

    I'm surprised that tRFC = 52 is still stable in your successful tests with your memory speed running at 980MHz.
    Set tRFC = 62.

    Your memory might be stable with 5-5-4-12 primary memory timings.
    I would NOT try the 5-5-4-12 timings with tRFC = 52.

    HWiNFO reports Vcore = 1.296 with LLC enabled during your tests.
    You might be able to lower Cpu Vcore from 1.3250 one click to 1.31875 or possibly two clicks to 1.3125 volts.
    I would NOT try even lower Vcore settings until you reach your final overclock.

    MCH Core that is too high or too low will nuke you every time.

  5. #595
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    I did have half of this 'extra special' memory tested by a pro you know! ;)

    I will change tRFC and CPU PLL to your suggestions. Almost time for bed here though but if the test fails I'll post the results before I go.
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  6. #596
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Arrow Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    CPU PLL 1.590V and tRFC = 62 failed after 42 minutes. (but hey it was more than 30 minutes!)

    Code:
    ***************************************
    ***************************************
    Gigabyte GA-EP45-UD3P (Rev. 1.0) - F11d
    ***************************************
    ***************************************
    ******************************
    MB Intelligent Tweaker(M.I.T.)
    ******************************
    Robust Graphics Booster ..............: [Auto]
    CPU Clock Ratio ......................: [9X]
    x Fine CPU Clock Ratio................: [+0.5]
    CPU Frequency ........................: 3.87GHz( 408x9.5)
    ********** Clock Chip Control ********
    >>>>>  Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [408]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    >>>>> Advanced Clock Control..........: [Press Enter]
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [  0ps]
    MCH Clock Skew........................: [  0ps]
    ******** DRAM Performance Control ********
    Performance Enhance...................: [Turbo]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [Auto]
    Memory Frequency(Mhz).....800.........: 960
    DRAM Timing Selectable (SPD)..........: [Manual]
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [Auto]
    x tRCD ...........................5...: [Auto]
    x tRP.............................5...: [Auto]
    x tRAS...........................18...: [Auto]
    >>>>> Advanced Timing Control.........: [Press Enter]
    x tRRD............................3...: [Auto]
    x tWTR............................3...: [Auto]
    x tWR.............................6...: [Auto]
    x tRFC...........................62...: [Auto]
    x tRTP............................3...: [Auto]
    x Command Rate (CMD) .............0...: [Auto]
    >>>>> Channel A Timing Settings.......: [Press Enter]
    x Static tRead Value.............8...: [Auto]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    x Trd2rd(Different Rank)..........8...: Auto
    x Twr2wr(Different Rank)..........8...: Auto
    x Twr2rd(Different Rank)..........7...: Auto
    x Trd2wr(Same/Diff Rank)..........9...: Auto
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    >>>>> Channel A Driving Settings......: [Press Enter]
    x Driving Strength Profile............: [Auto]
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    >>>>> Channel B Timing Settings.......: [Press Enter]
    x Static tRead Value.............8...: [Auto]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    x Trd2rd(Different Rank)..........8...: Auto
    x Twr2wr(Different Rank)..........8...: Auto
    x Twr2rd(Different Rank)..........7...: Auto
    x Trd2wr(Same/Diff Rank)..........9...: Auto
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    >>>>> Channel B Driving Settings......: [Press Enter]
    x Driving Strength Profile............: [Auto]
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    ****** Motherboard Voltage Control ******
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Enabled]
    CPU Vcore..............1.23750V.......: [1.32500V]
    CPU Termination........1.200V.........: [1.260V]
    CPU PLL................1.500V.........: [1.590V]
    CPU Reference..........0.760V.........: [Auto]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.200V]
    MCH Reference..........0.760V.........: [0.758V] When set to 0.720V
    MCH/DRAM Reference.....0.900V.........: [Auto]
    ICH I/O................1.500V.........: [Auto]
    ICH Core...............1.100V.........: [Auto]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.100V]
    DRAM Termination.......0.900V.........: [Auto]
    Channel A Reference....0.900V.........: [Auto]
    Channel B Reference....0.900V.........: [Auto]


    I'm gonna' head to bed but might get a chance to load up a test before I go to work in the morning if you can advise on a next step? If I was guessing I'd would try increasing Static tRead Value from 8 to 9?
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  7. #597
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Memset = 980MHz (490 x 2) and your bios template says 960MHz.
    ET6 MCH Core = 1.22 and in your bios template it is 1.20.

    Some strange HWiNFO information:
    • minimum Vcore = 0.624
    • minimum DIMM = 1.296
    • elaped time = 1:27:40

    In post #592 you said: "I'm going to try raising MCH Core a notch to see if it makes much difference."
    In post #593 you said: "I think that may have been a poor choice since it failed almost instantaneously:"
    In post #596, MCH Core = 1.22, the same setting as you used in post #593.

    Maybe you should set MCH Core back to 1.20 and re-test with the current tRFC (62) and CPU PLL (1.59) settings.

    Yes, tRD = 9 might work.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  8. #598
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    Jim you have the eyes of a hawk! The test ran for so long as I forgot to check on it for a while but I had forgotten to change MCH Core back to 1.2. I therefore re-tested at MCH Core = 1.20, tRFC (62) and CPU PLL (1.59). The system lasted 11 minutes:



    I will try tRD = 9 before I go to work and see if that fails before I go.
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  9. #599
    lukevega is offline Member
    Join Date
    Apr 2014
    Location
    Newcastle upon Tyne, England
    Posts
    307

    Exclamation Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    No luck with the tRD = 9 settings either:



    I hope I haven't missed something again with it being early in the morning here! What do we try next Jim?
    GA-EP45-UD3P 1.0, Intel Xeon X5470, 4x2GB Kingston HyperX DDR2 1066, NVidia Geforce 8800GTS 512, Kingston V300 240GB, Noctua NH-U12P with 2x Noctua NF-P12 Push-Pull, Corsair HX520W, Antec P182, Windows 7 64-bit

  10. #600
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock

    I hate to say it but I think that you need to change DRAM Performance Enhance from Turbo to Standard and manually enter some of the memory settings.

    Another option is further tweaking of MCH Reference and/or Cpu Reference voltages.

    Years ago a few claimed to have positive results with CPU Clock Skew and/or MCH Clock Skew tweaks but there was very little information for these settings.

    A last ditch option is to buy a Haswell system with a K-model cpu for overclocking. $$$ $$$
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


Page 60 of 74 FirstFirst ... 1050585960616270 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 27 users browsing this thread. (0 members and 27 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •