Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 10 of 11 FirstFirst ... 891011 LastLast
Results 91 to 100 of 106

Thread: The GIGABYTE Z97X Overclocking Guide




  1. #91
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: The GIGABYTE Z97X Overclocking Guide

    Could be invalid reading of HWMonitor, but the Ring offset is probably read from BIOS and not a sensor because I see no CPU Ring in HWiNFO.
    Have you changed ring voltage settings?

  2. #92
    Adrenalen is offline Junior Member
    Join Date
    Mar 2015
    Location
    Belgium
    Posts
    12

    Default Re: The GIGABYTE Z97X Overclocking Guide

    Nope, all on auto. Should I set the default value there manually?

  3. #93
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: The GIGABYTE Z97X Overclocking Guide

    Quote Originally Posted by Adrenalen View Post
    Nope, all on auto. Should I set the default value there manually?
    Or a bit more, shouldn't be that much, might help lowering temps, we'll see.

  4. #94
    Adrenalen is offline Junior Member
    Join Date
    Mar 2015
    Location
    Belgium
    Posts
    12

    Default Re: The GIGABYTE Z97X Overclocking Guide

    mm this was odd.

    https://drive.google.com/open?id=0By...UUk&authuser=0

    i set CPU ring voltage to 1.053v and slide the slider next to it to on. Then i normally just press apply and the stuff get's applied :P
    Now on the otherhand i press apply and my screen just goes black and my pc reboots. i go back into bios and it just stays on auto. tried this 3 times allways same outcome.

  5. #95
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: The GIGABYTE Z97X Overclocking Guide

    What is this on/off thing on the side?
    Try 1.05 and some offset or just offset if possible

  6. #96
    Adrenalen is offline Junior Member
    Join Date
    Mar 2015
    Location
    Belgium
    Posts
    12

    Default Re: The GIGABYTE Z97X Overclocking Guide

    when i change something in the bios, i allways have to put the slider to on. if i press apply, then only things that change are the ones with the slider on *on*
    if i set some voltage manulally .. the offset still stays grayed out all the time :x i can't put an offset :/
    i'll make a video what happens ^^ he he he

    EDIT :

    now it worked... But after post i got a BSOD with the code machine check exeption, had to hard reset and went back to bios... did this several times, allways increased with 0.001v , allways BSOD. now i entered windows.
    the offset is still grayed out.
    Last edited by Adrenalen; 03-07-2015 at 05:06 AM.

  7. #97
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: The GIGABYTE Z97X Overclocking Guide

    Video encoder may make use of AVX...

  8. #98
    Adrenalen is offline Junior Member
    Join Date
    Mar 2015
    Location
    Belgium
    Posts
    12

    Default Re: The GIGABYTE Z97X Overclocking Guide

    Don't get that? what video encoder? :)))
    cpu ring voltage is now 1.060v ( to much? I can't put it to auto anymore so i have to find the right value) gigabyte plz fix bios for z97gx gaming5 plz ^^
    edit : Srry again for my nubischness :/ love this oc'ing but kinda much to get it all in right away ^^ love you Chike! ;) :P xxx
    Last edited by Adrenalen; 03-07-2015 at 05:46 AM.

  9. #99
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: The GIGABYTE Z97X Overclocking Guide

    Quote Originally Posted by Adrenalen View Post
    Don't get that? what video encoder? :)))
    cpu ring voltage is now 1.060v ( to much? I can't put it to auto anymore so i have to find the right value) gigabyte plz fix bios for z97gx gaming5 plz ^^
    1.06 surely is less than 1.05+0.30, you may need more but even 1.1 or 1.15 is still significantly lower.
    You said you are going to make a video, this will use video encoder(codec) which may implement AVX.
    Increasing 0.001v each time make take a very long time, make it 0.005v steps.
    You may want to forward that last part to GB support along with description of the issue, I don't think they ever read posts here.

  10. #100
    Adrenalen is offline Junior Member
    Join Date
    Mar 2015
    Location
    Belgium
    Posts
    12

    Default Re: The GIGABYTE Z97X Overclocking Guide

    Quote Originally Posted by Chike View Post
    1.06 surely is less than 1.05+0.30, you may need more but even 1.1 or 1.15 is still significantly lower.
    You said you are going to make a video, this will use video encoder(codec) which may implement AVX.
    Increasing 0.001v each time make take a very long time, make it 0.005v steps.
    You may want to forward that last part to GB support along with description of the issue, I don't think they ever read posts here.
    ah, nono ^^ wanted to record a video with my phone so i could show you what happened the first 3 times when i wanted to set cpu ring voltage ( i pressed apply in bios and the pc just reboots, no manual setting happened )
    but when i recorded it, the bios accepted it.

    is there a max voltage you know of to set on the ring voltage?

Page 10 of 11 FirstFirst ... 891011 LastLast

Thread Information

Users Browsing this Thread

There are currently 5 users browsing this thread. (0 members and 5 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •