Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: Help Updating GA-X58A-UD3R Rev2.0 Bios




  1. #1
    TrebleTA is offline Junior Member
    Join Date
    Feb 2014
    Location
    England
    Posts
    38

    Default Help Updating GA-X58A-UD3R Rev2.0 Bios

    Ok I got the tool CBrom198 and the lasted modified bios from the main page what has already.
    Intel AHCI Rom 1.20e
    Intel Raid Sata 11.6.0.1702 With TRIM in RAID0, credits to CPLO/Dufus
    Realtek Lan Rom 2.58
    JMicro Raid Rom 1.07.28
    Marvell Bios version 1.0.0.1033 / Firmware 2.2.0.1125.

    So I open a CMD prompt and type cbrom bios /d and i get
    Help Updating GA-X58A-UD3R Rev2.0 Bios-cbrom1-png

    So my questions is, in that picture what are the marvell files I need to replace with the files on the forum page that i would need from here.
    http://forums.tweaktown.com/gigabyte...ity-tools.html

    I want to update the Marvel Bios to version 1.0.1.0025 and the Marvell Firmware to 2.3.0.1063. think there a typo on the main link page as says 2.3.1063

    thanks

  2. #2
    Join Date
    Sep 2015
    Location
    Canada
    Posts
    4

    Default Re: Help Updating GA-X58A-UD3R Rev2.0 Bios

    Marvell controllers seem to be a little more complicated...

    You have a 9123 according to your CBROM report. It looks like there is a large (512K) module (M9123FW.BIN) that includes the bootloader, firmware, and OROM all in one package.

    Can you confirm the Device ID in Windows Device Manager?

    The v2.3.0.1063 firmware looks to be for 92XX controllers.

    The 1.0.1.0025 BIOS looks to be for a 9192.

    I'm certainly no expert but from a quick Google search it appears that you already have the most up to date module available.

  3. #3
    TrebleTA is offline Junior Member
    Join Date
    Feb 2014
    Location
    England
    Posts
    38

    Default Re: Help Updating GA-X58A-UD3R Rev2.0 Bios

    I have the Marvell 9128 via device manager.
    I did think that was the Marvell bin file just the updates seem different, as you says that the bootloader firmware and orom. I was hoping that they may of been slipt up.

    Here is a link to some of the Modules BIOS modules (PCI ROM, EFI and others) ยป AHCI & RAID ROM Modules. Thats for 1.0.0.1038 moded from the marvell 9123 via hex edit.
    But i need the full package with loader frimware and orom.

    I found a package on station drivers that updates via msdos. just that gives a error from here Marvell MV-91xx SATA 6G Controller Firmware Version 1.0.0.1038

    This is for BIOS Version :1.0.0.1038 Firmware Version: 2.3.0.1007. but gives error's on install.

    The one on this site for 1.0.1.0025 is for 9192 so hex edit says. and thats the same for the 92xx 1.0.0.0034version. so your right there.

    What i need to do is get the one from station drivers to install correct or find a loader, FW, Orom

  4. #4
    TrebleTA is offline Junior Member
    Join Date
    Feb 2014
    Location
    England
    Posts
    38

    Default Re: Help Updating GA-X58A-UD3R Rev2.0 Bios

    When i update the firmware using the station drivers 1.0.0.1038 in dos I get
    Flashing section 1
    Flashing section 2
    Flashing section 3
    Flashing section 4
    Warning bios header and device ID dont match
    Incoming bios header is 0x9123
    Current device ID is 0x9128
    Flashing section 5
    Flashing section 6
    Flushed Successful
    So in that image there is a problem with flash block 4.
    I check the image with hex editor for 4B 1B 28 91 dont find any, yet search for 4B 1B 23 91 there is 11.
    Last edited by TrebleTA; 10-11-2015 at 02:59 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •