Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: Need help with pre-built/used GA-X58A-UD3R Rev 2.0 System




  1. #1
    Join Date
    Jun 2016
    Location
    Santa Cruz
    Posts
    2

    Cool Need help with pre-built/used GA-X58A-UD3R Rev 2.0 System

    Weird it saved my post with no spaces 1) What software is compat with my mobo from gigabyte on Win10? 2) What power saving options are ok with overclock? 3) Is northbridge temp going above 58C a cause for hardlock? 4) What bios version past Fh1 contains working VT-d? I got ESXi 6.0 going with Win10 gpu passthrough going fine :D
    Last edited by xscmanns; 06-29-2016 at 02:24 AM.

  2. #2
    Join Date
    Jun 2016
    Location
    Santa Cruz
    Posts
    2

    Default Re: Need help with pre-built/used GA-X58A-UD3R Rev 2.0 System

    Since adding R9 270X I get random hard locksThe tri-channel memory kit it came with no longer worked after I dropped system 1inch on one side of the case.... I had to replace stock i7 cooler the pins broke (plastic)The tri channel at first worked until I put watercooler (high temps on i7, but not past 80C~ +/- 5c However it was "disappearing ram" until I swapped two sticks positions, or put out of tri-channel not sure I think two in dual, one in other colored slots (3-white/blu slots) Now with 3x 8GB PNY 1600 I get same post loop first few times, then boots and no video same as the tri channel kit it came with. Bad mobo/dimm slot, dimm slot needing cleaning?, damaged cpu/cpu socket pins?:[

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •