Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Ga-p35-ds3l , x5450




  1. #11
    profJim's Avatar
    profJim is offline Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,842

    Default Re: Ga-p35-ds3l , x5450

    The Prime95 Large FFT is best for stressing the memory sub system.

    I would run the Large FFT test for at least 6 hours if there are no worker errors.
    Next would be the Small FFT test for at least 4 hours followed by the Blend test for at least 4 hours.

    It's best to run longer stress tests to ensure that your system is really stable.

    I would not run your current overclocked tests until I knew that my system was stable with the 8GB of mixed memory modules.


    A summary of my Prime95 Stress Test Recommendations
    With no worker errors:

    • 3 - 4 hour stress test shows that your system might be stable.
    • 6 - 8 hour stress test indicates that your system is mostly stable.
    • 12 hour (or longer) test implies that your system is stable.
    • 50 hour stress test shows that you are paranoid.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  2. #12
    Join Date
    May 2017
    Location
    Serbia
    Posts
    10

    Default Re: Ga-p35-ds3l , x5450

    I already did the large FTT's test for 11 hours, so I will do the small FTTS and the blend test later tonight.
    I also do not have the settings for the memory timings in my BIOS :(

  3. #13
    Join Date
    May 2017
    Location
    Serbia
    Posts
    10

    Default Re: Ga-p35-ds3l , x5450

    Code:
    Robust Graphics Booster___________ [Auto]
    Fine Clock Ratio ____________[9]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [380] 
    PCI Express Frequency (Mhz)_______ [Auto]
    C.I.A. 2__________________________ [Disabled]
    Performance Enhance = [Standard]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    
    CAS Latency Time_______________5_[6] Manual
    Dram RAS# to CAS# Delay________5_[6] Manual
    Dram RAS# Precharge Delay_______5_[6] Manual
    Precharge Delay (tRAS)__________15_[18] Manual
    
    ACT to ACT Delay (tRRD)_________3_Auto 
    Rank Write to READ Delay________5_Auto
    Write to Precharge Delay_________13_Manual
    Refresh to ACT Delay____________55_Manual
    Read to Precharge Delay__________3_Auto
    Static tRead Value_______________8_Auto
    Static tRead Phase Adjust_________0_Auto
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.200V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [Normal] 
    
    Limit CPUID Max. to 3....................: [Disabled]
    No-Execute Memory Protect............: [Disabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ..........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]  Integrated Peripherals Legacy USB Storage Detect___________________[Disabled] 
    Found the settings finally and I ended up with 6-5-5-18 timings and a blue screen after a bit.
    Last edited by Milansu; 12-20-2017 at 09:03 AM.

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •