Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 6 FirstFirst 12345 ... LastLast
Results 21 to 30 of 60

Thread: Ex58-ud5 wont post




  1. #21
    BruceY30 is offline Junior Member
    Join Date
    Feb 2019
    Location
    Md
    Posts
    34

    Default Re: Ex58-ud5 wont post

    first.... Intell i7-920 cpu should arrive Tuesday 5/28 and hope to have that installed within day or two. And Ill be able to finially get into the bios. My plan is to update bios then replace the 920 with my 970. Just not sure when to do update, before windows or after?

    Second.....I have a new SSD I want as C or drive that will have operating system on. When I was working on the motherboard I don't recall whitch SATA on motherboard to attach to? This EX58-UD5 has 4 controlled be Gigibyte SATA2/JMB322 AND 6 controlled by ICH10R.

    The solid state drive C will only have windows 10 on it. Nothing else.

    There are two other "regular" old style sata hard drives I will install programs on those and they too go to one of the above controllers. Question is which MOBO SATA do I connect theses to? Not sure if going to RAID the older drives at this point. Don't have experience setting up a RAID so Im following the KISS approach

  2. #22
    Chike is online now Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,625

    Default Re: Ex58-ud5 wont post

    When in doubt the manual is your best friend.
    GA-EX58-UD5 (rev. 1.0) | Motherboard - GIGABYTE Global
    Is the SSD too small to have the programs on it?
    Last edited by Chike; 05-27-2019 at 11:30 AM.

  3. #23
    BruceY30 is offline Junior Member
    Join Date
    Feb 2019
    Location
    Md
    Posts
    34

    Default Re: Ex58-ud5 wont post

    I have the manual for the MOBO And from what I read can hook up to either Iíll review the manual tomarrow. Was just wondering which one better or faster if one is. With 120gb the SSD is more than enough for win10p. I was told by a friend long ago when SSD first became available he only had win on the SSD and boot times were super fast. He used to joke ď press the on button and before Iím off the buttonĒ..... thatís my reason unless told otherwise.

  4. #24
    BruceY30 is offline Junior Member
    Join Date
    Feb 2019
    Location
    Md
    Posts
    34

    Default Re: Ex58-ud5 wont post

    Reading thru manual on SATA options. So far I read one controller supports raid 0,1,5,10. And other controller supports raid 0,1and JOBD( what ever that is). Data speed same on both. So it seems if just one drive, then can hook up to either one as long as SATA_0. Still reading

  5. #25
    Chike is online now Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,625

    Default Re: Ex58-ud5 wont post

    Although there may be minor differences between the chips both are SATA 2 ports are slower than the SSD.

  6. #26
    BruceY30 is offline Junior Member
    Join Date
    Feb 2019
    Location
    Md
    Posts
    34

    Default Re: Ex58-ud5 wont post

    IGOR, IT'S ALIVEEx58-ud5 wont post-img_0010-jpg

    The 920 arrived few days ago I installed cpu and took few days to get rest hooked up. have issue I think but needs another picture Ill try to put up

  7. #27
    BruceY30 is offline Junior Member
    Join Date
    Feb 2019
    Location
    Md
    Posts
    34

    Default Re: Ex58-ud5 wont post

    when first turn on and monitor gets signal, I do NOT get the Gigabyte Logo screen as shown in manual. I get this screwed up screen thenI have been pressing "DELETE" button to get into the CMOS




    Ex58-ud5 wont post-img_8510-jpg

  8. #28
    BruceY30 is offline Junior Member
    Join Date
    Feb 2019
    Location
    Md
    Posts
    34

    Default Re: Ex58-ud5 wont post

    AND the only drive attached is the SSD drive and 2 cd dvd drives The ONLY place I can see the SSD drive in HARD DISK BOOT PRIORITY It shows no where else, normal? as to no OS or mobo drivers installed yet and no drivers for video card yet either Ex58-ud5 wont post-img_8509-jpg

  9. #29
    Chike is online now Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,625

    Default Re: Ex58-ud5 wont post

    Quote Originally Posted by BruceY30 View Post
    AND the only drive attached is the SSD drive and 2 cd dvd drives The ONLY place I can see the SSD drive in HARD DISK BOOT PRIORITY It shows no where else, normal?
    I really forgot what show on these boards, the DVD drives don't show in boot priority screen?
    Who use DVD drives today anyway?
    What BIOS you have installed there?

    You should be able to take a screen capture of BIOS by pressing F12 I think while a FAT32 USB drive s plugged in, if not try to make them larger, and landscape not portrait.

  10. #30
    BruceY30 is offline Junior Member
    Join Date
    Feb 2019
    Location
    Md
    Posts
    34

    Default Re: Ex58-ud5 wont post

    Press F12 instead of delete?

Page 3 of 6 FirstFirst 12345 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 4 users browsing this thread. (0 members and 4 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •