Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 28

Thread: down system!!! please help!!




  1. #11

    Default

    UGH! maybe, i dont have a single shread of stability in the system anymore even at default speeds(266 dual chan non-liniar mode) damn thing crashes when i install video drivers and will never boot-up forcing me to have to do system restore. ill try doing a bios flash, because every boot-up bios tells me i have a new cpu installed and makes me go into bios again. ok back to start doing drivers again (starting over) ill try a bios flash wigga :P:wave:
    2.4 p4c @3.06 1020mhz fsb
    ASUS P4C800Delux
    CORSAIR ddr500 XMS (3-4-4-8)
    maxtor 120gb w/8meg cache (raid0)
    2x WD Raptors (Raid0)
    2x120Gb Maxtor's
    Ti4200 363/667 mhz
    Water-cooled Koolance case

  2. #12
    Join Date
    Feb 2003
    Location
    Fincastle, IN, USA
    Posts
    3,776

    Default

    Shot in the dark, is your CMOS battery good?

    Also, you mentioned disablig HT fixes it, you havent ran BootVis have you?

  3. #13

    Default

    no i havent ran bootvis, i dotn even know what it is, yes battery is good. i just tried to install the asus flash utility (to flash the bios) and it said it couldnt detect a asus mobo...crappy but bios rev. is 1012 i just d/l 1014 but im not gona deal with uit yet, i cant even get the vid card to work properly, i installed the nvidia drivers and reboot and my monitor goes black, then when i reboot it again it says windows crashed and if i go into safe and go back in a restore point it will work.
    2.4 p4c @3.06 1020mhz fsb
    ASUS P4C800Delux
    CORSAIR ddr500 XMS (3-4-4-8)
    maxtor 120gb w/8meg cache (raid0)
    2x WD Raptors (Raid0)
    2x120Gb Maxtor's
    Ti4200 363/667 mhz
    Water-cooled Koolance case

  4. #14
    Join Date
    Feb 2003
    Location
    Fincastle, IN, USA
    Posts
    3,776

    Default

    Run MemTest86

    EDIT: Also, as I mentioned earlier, be sure ACPI Power Management is enabled in the Bios

  5. #15

    Default

    ok, maybe this will reveal the problem, memtest-86 v3.0 failed 4/4 times! first time on 56%pass, test#5 next 3 times failed on 97/98% pass, test#6 @75% on 6:34 all 3 times, but, memory is brand new and worked before the bios died and needed to be replaced. so in combination with the x0000007f errors and the kernal data inpage errors, and the x00000024 errors might the problem be i fried the memmory controller in the p865pe chipset?
    tommorow i think im going to go get me a new mobo, a asus p4c800 delux, think thats a good idea?
    :shrug: :shrug: :shrug: :shrug:
    2.4 p4c @3.06 1020mhz fsb
    ASUS P4C800Delux
    CORSAIR ddr500 XMS (3-4-4-8)
    maxtor 120gb w/8meg cache (raid0)
    2x WD Raptors (Raid0)
    2x120Gb Maxtor's
    Ti4200 363/667 mhz
    Water-cooled Koolance case

  6. #16

    Default

    oh, also i ran sandra 2004 )free copy) and it passed all the memmory/cpu tests...
    2.4 p4c @3.06 1020mhz fsb
    ASUS P4C800Delux
    CORSAIR ddr500 XMS (3-4-4-8)
    maxtor 120gb w/8meg cache (raid0)
    2x WD Raptors (Raid0)
    2x120Gb Maxtor's
    Ti4200 363/667 mhz
    Water-cooled Koolance case

  7. #17
    Join Date
    Feb 2003
    Location
    Fincastle, IN, USA
    Posts
    3,776

    Default

    Up ya RAM voltage by 0.1v or even 0.2v

  8. #18

    Default

    ok, that did no good but bring instability, i am at total defaults right now....no overclocking atall...2.4ghz and ram is underclocked 50mhz...*sigh* it actualy smalls alittle bit like burning electronics when my pc is on....it crashed like a few times this is like the 15th try to get it to boot ....
    2.4 p4c @3.06 1020mhz fsb
    ASUS P4C800Delux
    CORSAIR ddr500 XMS (3-4-4-8)
    maxtor 120gb w/8meg cache (raid0)
    2x WD Raptors (Raid0)
    2x120Gb Maxtor's
    Ti4200 363/667 mhz
    Water-cooled Koolance case

  9. #19
    Join Date
    Feb 2003
    Location
    Fincastle, IN, USA
    Posts
    3,776

    Default

    I just read ya sig, and now Im with Wiggo, your PSU is probably goin' to **** already

  10. #20

    Default

    pic.
    2.4 p4c @3.06 1020mhz fsb
    ASUS P4C800Delux
    CORSAIR ddr500 XMS (3-4-4-8)
    maxtor 120gb w/8meg cache (raid0)
    2x WD Raptors (Raid0)
    2x120Gb Maxtor's
    Ti4200 363/667 mhz
    Water-cooled Koolance case

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •