Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 28

Thread: down system!!! please help!!




  1. #1

    Default

    ok, heres the problem, i was busy playing ut2k3 and my system died after a few hours of playing and at first it was erroring so i tested and found the ram to be bad, so i got a new exact set of corsair pc4000 xms ram and the bios died shortly after i got a os on there and updated/installed everything.. so i just got my bios chip back and it wont boot into windows, it will only boot into safe mode, i dont know what to do. i was thinking of getting a new mobo, but i love this one. oh also, when windows is installing it crashes and giver error code x0000007 but everything is at default speeds, could it by chance be the processor?, but then it wouldnt even turn on at all wouldnt it? HELP!!!!

    :group: :group: :group: :kay:
    2.4 p4c @3.06 1020mhz fsb
    ASUS P4C800Delux
    CORSAIR ddr500 XMS (3-4-4-8)
    maxtor 120gb w/8meg cache (raid0)
    2x WD Raptors (Raid0)
    2x120Gb Maxtor's
    Ti4200 363/667 mhz
    Water-cooled Koolance case

  2. #2
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    I'm just wonderin' if ya PSU is up to powerin' all the equipment that ya have runnin' in that setup. :?:

  3. #3

    Default

    oh, yea the psu is fine i tried running it barebones (unplugged everything not 100% essential)its 450watts
    2.4 p4c @3.06 1020mhz fsb
    ASUS P4C800Delux
    CORSAIR ddr500 XMS (3-4-4-8)
    maxtor 120gb w/8meg cache (raid0)
    2x WD Raptors (Raid0)
    2x120Gb Maxtor's
    Ti4200 363/667 mhz
    Water-cooled Koolance case

  4. #4
    Join Date
    Sep 2002
    Posts
    1,636

    Default

    Quote Originally Posted by ZEROKOOL
    so i just got my bios chip back and it wont boot into windows, it will only boot into safe mode
    I would try clean install of windows.
    Cuz above sounds like its not getting the right drivers or something.

  5. #5

    Default

    i tried installing a new copy of windows right now, thats where im stuck, the installer keeps crashing giving kernal instack errors, and x0000007 errors (blue screen of death), and it never finishes the install, it doesnt even get close, it will say 34 mins remaining for a long time, like an hour. !!!! ugh im so frustrated i dont know whats wrong!!!!!!ARGGGHH!!!!
    2.4 p4c @3.06 1020mhz fsb
    ASUS P4C800Delux
    CORSAIR ddr500 XMS (3-4-4-8)
    maxtor 120gb w/8meg cache (raid0)
    2x WD Raptors (Raid0)
    2x120Gb Maxtor's
    Ti4200 363/667 mhz
    Water-cooled Koolance case

  6. #6
    Join Date
    Feb 2003
    Location
    Fincastle, IN, USA
    Posts
    3,776

    Default

    Do you have ACPI power managment enabled in the Bios?

  7. #7
    Join Date
    Dec 2003
    Posts
    33

    Default

    U R 2 OVERCLOCKED MAN!!!

  8. #8
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    I just have a feelin' that the PSU after so long at powerin' so many things has just sagged too far much (premature agein') as what ya state in ya sig (plus what ya havn't stated) is IMO to much for any 450W to handle (550W minimum I'd use but I'd likely use 2 x 420W inline PSU's).

  9. #9

    Default

    psu isnt even 3 months old yet if its aging already...holy cow!, ok but this is even stranger, i had one of my pc buddies come in and he fixes pc's for a living, he couldnt fgure it out, but check this... as ssoon as i disabled HT everything worked again, no crashes no slow no errors just...worked (i havent tweaked the bios atall yet still running in ddr266 non-linniar/2.4Ghz) any thougts? i was thinking it blew the chipset itself, i kinda thought that 275+fsb was fast...ok gtg alot fo updating to do!:thumb:
    2.4 p4c @3.06 1020mhz fsb
    ASUS P4C800Delux
    CORSAIR ddr500 XMS (3-4-4-8)
    maxtor 120gb w/8meg cache (raid0)
    2x WD Raptors (Raid0)
    2x120Gb Maxtor's
    Ti4200 363/667 mhz
    Water-cooled Koolance case

  10. #10
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Maybe ya need to do a BIOS update. :?:

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •