Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: PC shuts down and beeps




  1. #1
    Join Date
    Feb 2005
    Posts
    3

    Default PC shuts down and beeps

    I built a pc about a year ago follow by nine months of flawless operating. Recently it will blink off and beep (long beeps) continuously until you power off or reset the system; or it will freeze. I have a tyan s2507 tiger 230 mobo, 1 ghz PIII 512 mb PC133 ram. I have played with replacing, removing, switching order of the ram but to no avail. If someone could help me it would be grealty appreciated. Thanks.

    Evernt viewer log:

    Event Type: Error
    Event Source: ipnathlp
    Event Category: None
    Event ID: 30013
    Date: 2/1/2005
    Time: 12:15:53 AM
    User: N/A
    Computer: J-DESKTOP
    Description:
    The DHCP allocator has disabled itself on IP address 192.168.2.123, since the IP address is outside the 192.168.0.0/255.255.255.0 scope from which addresses are being allocated to DHCP clients. To enable the DHCP allocator on this IP address, please change the scope to include the IP address, or change the IP address to fall within the scope.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    ---------------------
    Event Type: Error
    Event Source: ACPI
    Event Category: None
    Event ID: 5
    Date: 2/1/2005
    Time: 12:14:58 AM
    User: N/A
    Computer: J-DESKTOP
    Description:
    AMLI: ACPI BIOS is attempting to write to an illegal IO port address (0xcf8), which lies in the 0xcf8 - 0xcff protected address range. This could lead to system instability. Please contact your system vendor for technical assistance.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 00 00 00 00 04 00 52 00 ......R.
    0008: 00 00 00 00 05 00 05 c0 .......
    0010: 00 00 00 00 00 00 00 00 ........
    0018: 00 00 00 00 00 00 00 00 ........
    0020: 00 00 00 00 00 00 00 00 ........

    ---------------------
    Event Type: Error
    Event Source: Service Control Manager
    Event Category: None
    Event ID: 7000
    Date: 2/1/2005
    Time: 12:07:28 AM
    User: N/A
    Computer: J-DESKTOP
    Description:
    The WinPPPoverEthernet service failed to start due to the following error:
    The system cannot find the file specified.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    --------------------------------
    Event Type: Error
    Event Source: ipnathlp
    Event Category: None
    Event ID: 30013
    Date: 2/1/2005
    Time: 12:06:18 AM
    User: N/A
    Computer: J-DESKTOP
    Description:
    The DHCP allocator has disabled itself on IP address 192.168.2.123, since the IP address is outside the 192.168.0.0/255.255.255.0 scope from which addresses are being allocated to DHCP clients. To enable the DHCP allocator on this IP address, please change the scope to include the IP address, or change the IP address to fall within the scope.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    -------------------------------------
    Event Type: Error
    Event Source: ACPI
    Event Category: None
    Event ID: 4
    Date: 2/1/2005
    Time: 12:05:27 AM
    User: N/A
    Computer: J-DESKTOP
    Description:
    AMLI: ACPI BIOS is attempting to read from an illegal IO port address (0xcfc), which lies in the 0xcf8 - 0xcff protected address range. This could lead to system instability. Please contact your system vendor for technical assistance.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 00 00 00 00 04 00 52 00 ......R.
    0008: 00 00 00 00 04 00 05 c0 .......
    0010: 00 00 00 00 00 00 00 00 ........
    0018: 00 00 00 00 00 00 00 00 ........
    0020: 00 00 00 00 00 00 00 00 ........

  2. #2
    Join Date
    Nov 2003
    Location
    Minnesota, United States
    Posts
    4,543

    Default Re: PC shuts down and beeps

    Get Memtest from my signature and test the memory with it. You're getting a continous POST beep, which generally indicates a memory problem. However, you may want to look at Tyan's web site or the board's manual to be sure what the POST beep indicates.

  3. #3
    Join Date
    Feb 2005
    Posts
    3

    Default Re: PC shuts down and beeps

    Tyan only refers the consumer to the Award Monitoring site to look up beep codes. I have looked into this and it does indicate memory failure. However, it doesn't seem to matter what memory is installed, the problem persists. I will try the Memtest a try and see what it says. Thank you.

  4. #4
    Join Date
    Feb 2005
    Posts
    3

    Default Re: PC shuts down and beeps

    I ran the memory test and it said there were no errors. Any other suggestions?

  5. #5
    Join Date
    Nov 2003
    Location
    Minnesota, United States
    Posts
    4,543

    Default Re: PC shuts down and beeps

    You should try reseting the CMOS. If that doesn't work, take everything off the motherboard except the processor and take the CMOS battery out. Wait a while, and hook everything up. If that doesn't work, either the memory isn't in properly or the board is likely somehow damaged.

  6. #6
    Join Date
    Feb 2005
    Posts
    1

    Default Re: PC shuts down and beeps

    Not sure about the 2nd error, but the 1st isnt about your memory.. your DHCP allocators scope isnt configged correctly try this :

    Open the cmd prompt (start--run-- cmd)
    Then type the following : (each line has to be ended with an enter)

    netsh
    routing
    ip
    autodhcp
    show (if show returns "not installed" then type : install ")
    set mode online
    set global 192.168.2.0 255.255.252.0 10000
    show global

    -------------------------

    This should return the following :

    DHCP Allocator Configuration Information

    ----------------------------------------

    Scope Network : 192.168.2.0 This address and mask
    Scope Mask : 255.255.252.0 reflects your network
    Lease Time (minutes) : 10000
    Logging Level : Verbose

    you could add an ip adress exclusion by typing

    add exclusion 192.168.2.16

    this will have the DHCP allocator NOT give away ip 192.168.2.16, for example if you have any ip dependent services running on one of your boxes



    This should at least solve your 1st error.
    Good luck
    Last edited by KLFHerry; 02-06-2005 at 04:19 PM. Reason: typo

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •