Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: monitor and power switch problem

  1. #1
    Join Date
    May 2005

    Default monitor and power switch problem

    Hi there,
    I have just switched cases and now my monitor is not receiving a signal from the pc and my power switch will not turn the pc off.
    The monitor is working, the power switch turns the pc on and the reset switch works.
    All the fans, LED's and drives seem to power up and there are no error beeps.
    I have checked all the connections and there seems to be no visible damage anywhere.
    I have a bios saviour fitted and it wont boot with either bios.
    I dont have a spare graphics card but want to know all the possibilities before I buy a cheapy to try out.
    Any ideas guys ??

  2. #2
    Join Date
    Nov 2001
    Texas, USA

    Default Re: monitor and power switch problem

    Remove everything from the case and start over. If your case came with little fiber grommets, use them for your mounting screws for the mainboard. You may be getting a slight short somewhere or something may not be fully seated. Memory modules and video board will be the two likely culprits if this is the case.
    Old age and treachery will overcome youth and skill
    My Toys

  3. #3
    Join Date
    May 2005

    Default Re: monitor and power switch problem

    Thanks for the reply but no joy with your suggestions... I'm gonna see if I can borrow a graphics card next to test ...then .... who knows ??

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts