Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: Issues after a rebuild




  1. #1
    Join Date
    Aug 2009
    Location
    Houston
    Posts
    3

    Default Issues after a rebuild

    Hello! I've recently poured some more money into my system and I've been having a few problems with it. I've heard this is a good site for checking these things out and thought I'd see if I could get any help here.


    • It kept freezing up quite a bit during the windows installation.
    • I also have many different parts of windows crash while hardly running anything. (DNS client, Installer modules, Host Processes, and a variety of other programs I run)
    • On occasion I also get a memory management crash screen.
    • Trying to install windows updates usually causes many of these problems but they occur on their own as well.

    So far all I've found is that in the BIOS the memory was defaulted to 1066 instead of 1333 and the timing was 7-7-7-20 instead of 9-9-9-24, which I have adjusted but doesn't seem to have helped any.

    I've also reinstalled windows numerous times but always seem to have the same issues.

    I'm also curious as the BIOS also says I only have 2.33 GHz in the processor when Windows, and the chip tell me I have 2.83.

    Any help or insight into this would be greatly appreciated.
    SPCES:

    • Case: RAIDMAX Sagitta 2 1 x 120mm Fan For CPU Cooling
      1 x 120mm Silent Rear Exhaust Fan 1 x Front 120mm Front Intake Fan
      (Mod # ATX-928WB)
    • MB: EVGA nForce 790i Ultra SLI ,Socket 775, ATX
      (Mod # 132-CK-NF79-A1)
    • PS: OCZ GameXStream 850-Watt ATX,120mm Fan (Mod # OCZ850GXSSLI)
    • CPU: Intel Core 2 Quad Q9550 - 2.83GHz, 12MB Cache, 1333MHz FSB, Yorkfield, Quad-Core, Retail, Socket 775, (Mod # BX80569Q9550)
    • HD: (1x) Western Digital Caviar Green 1TB, 7200 RPM, 32MB/SATA-3G (Mod # WD10EADS TD)
    • MEM: Corsair Dual Channel 4096MB PC10600 DDR3 1333MHz Memory (2x2048MB) (Mod # TW3X4G1333C9DHX)
    • GPU: (1x) EVGA GeForce 8800 GTS SSC Video Card, 640MB GDDR3, PCI Express, SLI Ready, (Dual Link) Dual DVI, HDTV,
      (Mod # 640-P2-N829-A3)
    • Monitor: Samsung SyncMaster 22" (Mod # 226BW)
    • OS: Retail Windows Vista Ultimate 64-bit w/ SP1

  2. #2
    Join Date
    Nov 2007
    Location
    Australia
    Posts
    286

    Default Re: Issues after a rebuild

    the cpu speed issue is due to intel speedstep...the cpu decreases its multiplier to its minimum to save power.

    How much ram do u have? if > 4 modules i think the MCH voltage will need to bumped up slightly.
    Asrock P55-Extreme
    Core I5 @ 3.2GHZ
    2x2GB G.skill Ripjaws DDR3 1600
    ASUS HD5850
    1TB Samsung SATA II
    Corsair TX650W PSU

  3. #3
    Join Date
    Aug 2009
    Location
    Houston
    Posts
    3

    Default Re: Issues after a rebuild

    It's four gigs, two modules of two. The voltage I bumped up from 1.5 to 1.7 but that didn't help much either.
    SPCES:

    • Case: RAIDMAX Sagitta 2 1 x 120mm Fan For CPU Cooling
      1 x 120mm Silent Rear Exhaust Fan 1 x Front 120mm Front Intake Fan
      (Mod # ATX-928WB)
    • MB: EVGA nForce 790i Ultra SLI ,Socket 775, ATX
      (Mod # 132-CK-NF79-A1)
    • PS: OCZ GameXStream 850-Watt ATX,120mm Fan (Mod # OCZ850GXSSLI)
    • CPU: Intel Core 2 Quad Q9550 - 2.83GHz, 12MB Cache, 1333MHz FSB, Yorkfield, Quad-Core, Retail, Socket 775, (Mod # BX80569Q9550)
    • HD: (1x) Western Digital Caviar Green 1TB, 7200 RPM, 32MB/SATA-3G (Mod # WD10EADS TD)
    • MEM: Corsair Dual Channel 4096MB PC10600 DDR3 1333MHz Memory (2x2048MB) (Mod # TW3X4G1333C9DHX)
    • GPU: (1x) EVGA GeForce 8800 GTS SSC Video Card, 640MB GDDR3, PCI Express, SLI Ready, (Dual Link) Dual DVI, HDTV,
      (Mod # 640-P2-N829-A3)
    • Monitor: Samsung SyncMaster 22" (Mod # 226BW)
    • OS: Retail Windows Vista Ultimate 64-bit w/ SP1

  4. #4
    Join Date
    Sep 2009
    Location
    ROMANIA
    Posts
    13

    Default Re: Issues after a rebuild

    Try to flash another bios from that board...Search on it site..
    DISABLE SPEEDSTEP and SPREAD SPECTRUM .

  5. #5
    Join Date
    Aug 2009
    Location
    Houston
    Posts
    3

    Default Re: Issues after a rebuild

    Well I picked up a few new memory modules last week and replaced them with the ones I had. (Same model) And so far, the system seems to be running fine now, so hopefully that solved the issue. Thanks to everyone that helped. :)
    SPCES:

    • Case: RAIDMAX Sagitta 2 1 x 120mm Fan For CPU Cooling
      1 x 120mm Silent Rear Exhaust Fan 1 x Front 120mm Front Intake Fan
      (Mod # ATX-928WB)
    • MB: EVGA nForce 790i Ultra SLI ,Socket 775, ATX
      (Mod # 132-CK-NF79-A1)
    • PS: OCZ GameXStream 850-Watt ATX,120mm Fan (Mod # OCZ850GXSSLI)
    • CPU: Intel Core 2 Quad Q9550 - 2.83GHz, 12MB Cache, 1333MHz FSB, Yorkfield, Quad-Core, Retail, Socket 775, (Mod # BX80569Q9550)
    • HD: (1x) Western Digital Caviar Green 1TB, 7200 RPM, 32MB/SATA-3G (Mod # WD10EADS TD)
    • MEM: Corsair Dual Channel 4096MB PC10600 DDR3 1333MHz Memory (2x2048MB) (Mod # TW3X4G1333C9DHX)
    • GPU: (1x) EVGA GeForce 8800 GTS SSC Video Card, 640MB GDDR3, PCI Express, SLI Ready, (Dual Link) Dual DVI, HDTV,
      (Mod # 640-P2-N829-A3)
    • Monitor: Samsung SyncMaster 22" (Mod # 226BW)
    • OS: Retail Windows Vista Ultimate 64-bit w/ SP1

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •