Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Can You Help Me Diagnose This Problem?




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Can You Help Me Diagnose This Problem?

    Great to hear, IE Sucks and I thought that might be the cause of your issues.

    Try these settings and see how you get along

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............:Auto or Fast
    CPU Clock Ratio ..........................: 9x
    Fine CPU Clock Ratio.....................:.+0.0
    CPU Frequency ...........................: 3.00 GHz
    
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:Auto 
    C.I.A.2 .................................:[Disabled]
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mv
    PCI Express Clock Drive.................: 900mv
    CPU Clock Skew (ps)....................: ops
    MCH Clock Skew (ps)...................: 0ps
    
    DRAM Performance Control
    Performance Enhance...................: Turbo  << Standard if you have issues
    Extreme Memory Profile (X.M.P.).....: Auto
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: Auto  << Set 3.20B for 1066Mhz
    Memory Frequency (Mhz) ..............:1066
    DRAM Timing Selectable ................: [Auto] << Manual
    
    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15
    
    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................3-6
    tWR............................................4-6
    tRFC...........................................52-62
    tRTP...........................................3-4
    Command Rate (CMD) ....................:0  << Set 2
    
    Driving Strength Profiles A & B
    Driving Strength ............................1066
    
    Channel A
    Static tRead Value.........................:6  << Set both A&B to match, just being sure.  6-7 is fine for 333 FSB
    tRD Phase0 Adjustment...................:Auto 0
    tRD Phase1 Adjustment...................:Auto 0
    tRD Phase2 Adjustment .................:Auto 0
    tRD Phase3 Adjustment..................:Auto 0
    Trd2rd(Different Rank)....................:Auto 8
    Twr2wr(Different Rank)...................:Auto 8
    Twr2rd(Different Rank)...................:Auto 7
    Trd2wr(Same/Diff Rank)..................:Auto 0
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto
    
    Channel B
    Static tRead Value.........................:6 << Set both A&B to match, just being sure.  6-7 is fine for 333 FSB
    tRD Phase0 Adjustment...................:Auto 0
    tRD Phase1 Adjustment...................:Auto 0
    tRD Phase2 Adjustment .................:Auto 0
    tRD Phase3 Adjustment..................:Auto 0
    Trd2rd(Different Rank)....................:Auto 8
    Twr2wr(Different Rank)...................:Auto 8
    Twr2rd(Different Rank)...................:Auto 7
    Trd2wr(Same/Diff Rank)..................:Auto 9
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto
    
    Motherboard Voltage Control
    Voltage Type.………... Normal Current
    CPU
    CPU Vcore….……….........................:1.25000V Auto
    CPU Termination…..... 1.200V*.......: 1.2v Auto  << Auto should be fine, but 1.225 could help
    CPU PLL…………………....1.500V*.......: Auto
    CPU Referen.…………....0.760V*.......: Auto
    
    MCH/ICH
    MCH Core…………….....1.100V...........: Auto  << Normal would be 1.20-1.24 for 4GB
    MCH Reference….…….0.760V...........; Auto
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.500V............: Auto
    ICH Core…………...……1.100V............: Auto
    
    DRAM
    DRAM Voltage ……....1.800V............: Auto  << Set to the spec of your memory, this is normally 2.0-2.2 (if those are new Crucials then 2.0V would be correct, if old 2.2.   If you are not sure please look in CPU-z SPD Tab)
    
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto
    
    Advanced Settings
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Enabled]
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled]
    __________________

  2. #12
    Join Date
    Jul 2009
    Posts
    63

    Default Re: Can You Help Me Diagnose This Problem?

    Wow! Are you sure about those settings? I entered them, and on startup, I got an immediate BSOD. I then went back and returned the settings to "optimized", let the thing sit for a few minutes, then restarted. It's working again.
    Friendlyphil

    System Info:
    Gigabyte GA-P45T-ES3G Rev. 1.3
    Intel Core2 Duo E8400 LGA775 3GHz
    Gigabyte ATI Radeon HD 4670
    Aero Cool i-curve box
    2-WD 640GB HD's
    Kingston 2 x 4GB DDR3 1333MHz
    Windows 7 Pro 64-bit
    Bios V. F1

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •